Haier HWM40-187S User Manual

Twin-tub Washing Machine

This manual is for

HWM40-187S

User's manual

Please read this manual
carefully before using.
Retain it for future reference.

0030803015C

Contents

Names of the parts - - - - - - - - - - - - - - - - - - - 1
Safety precautions - - - - - - - - - - - - - - - - - - - 2
Installation and adjustment - - - - - - - - - - - - - 4
Preparation before washing - - - - - - - - - - - 6
The musts in washing - - - - - - - - - - - - - - - - -7
Usage of the detergent - - - - - - - - - - - - - - - 7
Washing sequence - - - - - - - - - - - - - - - - - - -8
Disposal after washing - - - - - - - - - - - - - - - - 11
Trouble-Shooting *Answer to question - - - - - 13
Packing list - - - - - - - - - - - - - -- - - - -- - - - - 15
Specification- - - - - - - - - - - - -- - - - - - - - - - 16

Wash selector

Wash timer

Names of the parts

Water-filling entrance

Control panel

Overflow filter

Water level adjusting
lever

Lint filter
(installed by user)

Valve cover

Pulsator

Wash tub

Drain hose

Wash tub cover

Base frame

Notes: All illustrations in this manual are given for reference only. Your products and
accessories may show differences from these illustrations due to our
continuous improvement.

Outer cover of the spin tub

Inner cover of the spin tub

Spin timer

Major frame

Spin tub

Cabinet

Meaning and description of the symbols

Warning sign

Contents marked with that symbol are related
to the safety of the product and the personal
safety of the users. Please operate in strict
conformity to the contents, otherwise it may
cause damage of the machine or injure the
personal safety of the user.

Forbidding sign

Contents marked with that symbol are actions
forbidden to perform. Performing of those
actions may result in damage of the machine
or injure the personal safety of the user.

Please check if the power receptacle has good earthing condition
before using to guarantee your safety.

1

Safety precautions

Please insert the power cord into
special receptacle with rated vol­tage. Be sure to use single-phase
three pins receptacle. The earthing
terminal of the receptacle must be
earthed reliably. If possible, please
adopt electric leakage protector.

When the machine is normally
using, please put the power plug
at the location easily to be insert­ed and extracted by hand. Be sure
to pull the plug off when there's
power failure, or the machine is
being moved, cleaned or when it
is idle.

If the power cord is bad, to avoid risk it is required to replace it by the
technicians of our special shop or the after-sale service department.
Keep the pin of the power plug clean.

Do not put the machine at damp
place like the bathroom . Never
wash it with water. Do not place
wet laundries on the control panel.

Do not use water hotter than 50 C .

In case the washing machine is installed
on ground with carpet , do not block the
ventilation hole with carpet.

Ventilation hole at
the bottom of the
washing machine

Do not let the machine share one receptacle
with other electric appliances. If the power
plug is damaged, or the plugging into the
receptacle is loose, do not use the plug any
more.

Do not wash water-proof laundries like
the raincoat, bike covers etc. to avoid
abnormal vibrations in spinning.

2

Safety precautions

Do not stretch hands into the working
machine. It is dangerous even if the
rotation is slow. Take special care of
the children.

Do not put any hot or heavy items
( such as the kettle with hot water )
on the washing machine.

Handicapped or children without care
shall not use the machine.

Do not decompose, repair or alter the
machine by yourself.

Do not wash laundries with volatile
materials (such as thinner, petrol etc.).

l

etro

P

inner

Th

Keep the machine away from direct
sunlight and heat source like the
heater.

It is suggested to use foamless washing powder.

Please don t use the washer in the environment below 0 C. If the washer is below 0 C, the
washer s water inlet system and draining system will be frozen ,then result in the damaged
of the whole machine. If the washer has below 0 C, please be sure to ensure the washer is
placed under the room temperature for 2~4 hours and then use .

3

Installation and adjustment

Please install and adjust the machine according to the requirement of
the manual. It is very important to your security and correct operating
the machine.

Install the lint filter

After opening the package, please take out the lint
filter from the document bag, install it to the overflow
filter of the wash tub. See to the figure.

Usage of the drain hose

The drainage shall be smooth with the drain hose.

1.The height of the drain hose shall be
less than 10cm , or the drainage will
not be smooth enough and cause
incomplete drainage.

2.Do not tramp or press the drain hose.

3.If the drain hose is too long, cut it at mid point.
To make smooth drainage, cut the front end of
the hose slantingly.

4.If extra drain hose is needed , please make
separate purchase. The inner diameter of the
extra hose shall not less than 30mm, and the
length shall not exceed 1.5m.

If the extra hose is too long, cut it either
at point A or B.

<10cm

> 30mm

<1.5m

BA

Voltage change

This washer is assembled for 220V, but can be changed from 220V to 127V.
Check your electrical source and follow the diagram below to convert voltage.

Green

Blue

White

Loosen the fastening screw and take off the back cover.

(1).

(2). Unknit

the safeguard bag to expose the connectors.
(3). Detach the white connector from the green one(220V), then inlay
it into the blue one(127V).
(4). Pack all the connectors with the safeguard bag as usual and f
Then install the back cover.

Above all the steps must be done by the special serviceman.

4

ix it.