Haier HWM33-200 User Manual

XQB60-C

User's Manual

Automatic Washing Machine

Please read this manual carefully before using.
Retain it for future reference

Please check if the power receptacle has good earthing
condition before using to guarantee your safety.

The manufacturer will not bear the responsibility for
those risks occurred from not obeying this manual.

Specifications the back cover

Picking list

Contents

Before using

Using process

Trouble shooting *
Answers to questions

16

7
8

9
10
14
14
15

Preparation before washing
Put in the laundries
Add the detergent and softener
Use the operation buttons
Close the top lid
Finish washing
Disposal after washing

nd

Names of the parts The 2 cover
Safety precautions
Installation and adjustment
Install the water inlet hose 5

1
3

17

Names of the parts

Before using

Before using

Before using

Before using

Meaning and description of the symbols

Accessories

Contents marked with
that symbol are related
to the safety of the
product and the personal
safety of the users. Failure
to comply with the
instruction could cause
damage of the machine
or injure the personal
safety of the user.

Warning

mark

Top lid

Control panel

Lint filter(Installed by user)

Control panel film

Pulsator

Cabinet

Base frame

Adjustable foot
seam

Adjustable foot

Inner drain hose

Power line

Inner tub

Cabinet handle

Back cover

Water level Switch

Control panel film

Water valve

Bottom plate

(1 piece)

The end connecting to
the washing machine

The end connecting to
the water inlet hose jointer

Jointer connecting
the water inlet hose
to the water faucet

Water inlet hose

(2 pieces)

Water inlet

hose jointer

(2 pieces)

Tapping screw

ST4x 16

(1 pieces)

Drain hose
(1 pieces)

Hose clamp
(1 pieces)

Lint filter
(1 piece)

Contents marked with
that symbol are actions
forbidden to perform.
Failure to comply with
the instruction could
result in damage of the
machine or injure the
personal safety of the user.

Forbidding

mark

Safety precautions

Before using

Before using

Before using

Before using

In normal usage of the washing machine,
the power plug shall be ready to be pulled
or plugged with hand. Be sure to pull the
plug off and close the water faucet in
following cases: power failure, delivering
the machine, setting the machine idle or
cleaning the machine. Do not plug
or pull the power plug with wet hand.

In case the washing machine is installed on
ground with carpet, be careful not to block the
ventilation hole with carpet.

Do not let the machine share one receptacle with other
electric appliances. If the power plug is damaged, or the
plugging into the receptacle is loose, do not use it any
more.

Do not set the machine at damp place
like the bathroom. Never wash it with water.
Do not put wet laundries on the control
panel coating.

Do not use water with temperature
higher than 50 inside the tub.

Do not wash water-proof laundries like
the raincoat, bike covers, down textiles etc.
to avoid abnormal vibrations in spinning and
damaging the laundries.

Do not bend, stretch, twist, bind the power cord by force,
or reform it. Do not press or clamp it with heavy items. If the
power cord and power plug are bad, or the receptacle is loose,
be sure to have it replaced by the technicians of our special shop
or our agent, or the after-sale service department for the sake
of avoiding any risk. Keep the prong of the power plug clean.
If dust is found on the power plug, please wipe it off with dry cloth.

Earth

The ventilation
holes at the
bottom

Please insert the power cord into special
receptacle with rated voltage.Be sure to
use single-phase three pins receptacle.
The earthing terminal must be earthed
reliably.If possible,please adopt electric
leakage protector.

Do not put hand into the rotating tub. It is
dangerous even if the rotation speed is slow.
Take special care of the children. Keep
children away from the washing machine
to avoid them climbing on it.

Do not decompose, repair or alter
the machine by yourself.

Do not put any hot or heavy items
(such as the kettle with hot water) on the
washing machine.

Do not wash laundries with volatile
materials (such as thinner, petrol etc.).

Keep the machine away from direct
sunlight and heat source like the heater.

The handicapped or children shall not
use the machine without care.

Safety precautions

Before using

Before using

Before using

Before using

Please check if the water faucet is open, and if
the connection of the water inlet pipe is proper.
It is suggested to use foamless washing powder.

To prevent the lint in the tub from blocking
the cascade outlet and influencing the
cascade effect, please keep the lint filter
in good condition, and install it to proper
position during washing. If the lint filter is
lost or damaged, please contact the local
after-sale service department of our
company.

To protect your laundries and washing
machine, please take out all of the coins,
buttons, sand, hairpin and other foreign
materials before washing.

Adjust the installation position

3

Please install and adjust the machine according to the requirement of the manual, which is very
important for you to operate the machine safely and properly.

Safety precautions

Before using

Before using

Before using

Before using

The largest allowable slope of the shank base
of the machine is 2 . The slanting or rough
ground will result in unstable running or
stoppage of the machine. Please adjust it with
following methods:

Adjust the adjustable leg:

1.To twist the adjustable leg, please first lift up the
leg side slightly, loosen the adjustable nut, and
then twist the leg.

2.After adjustment, fasten the nut.

Loosen

Fasten

High

Low

Adjustable nut

Adjustable leg

Insert the bottom of the lint filter

( marked with down side ) into

the filter frame, then push the

upper part of the filter in ( marked

with up side ).(See to Figure )

Install the lint filter

Install the bottom plate

After opening the package, please lean the

washing machine gently down on soft items

(like towel cloth, blanket, etc.). Install the

bottom plate to the bottom of the machine

with one screw by a cross screwdriver,

then lift the machine up gently. See to the

figure:

Before using

Before using

Before using

Before using

1.The height of the drain hose shall be

less than 10cm, or the drainage will not
be smooth, and cost such long time that
the machine may stop at mid way.

2.Do not ramp or press the drain hose.

If the drain hose is too long, cut it at mid
point. To make smooth drainage, cut the
front end of the hose slantingly.

4.If extra drain hose is needed, please

make separate purchase. The inner
diameter of the extra hose shall not
less than 30mm, and the length shall
not exceed 1.5m.

If the extra hose is too long, cut it
either at A or at B point.

Usage of the drain hose

The drain hose shall drain smoothly

Install the outer drain hose

Connect the outer drain hose to the inner drain hose by using the drain hose clamp clip them.

Remarks: The direction of the drain hose can be changed by professional person.