Haier HWM150-0623S User Manual

Midway spinning
1.Put the laundries into the spin tub evenly and smoothly.
2.Spin
(1) Put the gland in properly.
Please put in the gland properly even if the
laundries quantity is small.
Push
Gland
Push
Proper
The laundries are slanting
(2) Close the inner and outer cover of the spin tub.
Outer cover of The spin tub
(3) Spin for 1-2 minutes.
3.Run the foam-removing spinning.
1
Set the fill selector handle on spin side and
fill water for about 1 min.
In case water flows out from wash tub side
due to too much inflow, please turn down
2
Close the spin tub outer cover and spin
for about 1 - 2 min.
Proper
No gland
Inner cover of The spin tub
Fill selector handle
Water inlet
WASH
INLET SELECTOR
SPIN
9
Rinsing
Rinse with water-filing
1.Put the laundries into the wash tub. Select suitable current according to the laundries.
2.Adjust the water level Set the water level with water level adjusting lever according to the laundries quantity. Then fill suitable water continuously.
3.Rinse Adjust the wash timer to 5-7 minutes to do rinsing.
(Repeat the midway spinning and
Rinse with stored water
1. Put the laundries into the wash tub. Select suitable current according to the laundries.
2. Fill water to preset water level.
rinsing with stored water for 2-3 times)
OVERFILL
If you find water flo­wing out here,please twist the water tap to limit the water filling.
3. Rinse Adjust the wash timer to 2-3 minutes to do rinsing.
When the laundries quantity is few, please use "Soft" current. If you use "Standard" current, it may splash.
10
Spinning
1. Put the laundries into the spin tub evenly and smoothly.
2. Press the gland in the tub properly. Close the inner and outer cover of the spin tub.
3. Spin Select suitable spin time according to the laundries, and do spinning.
During spinning, if there's abnormal sound, it is generally owing to slanting placement of the laundries. Please stop the machine and re-order the laundries.
In spinning, it will pause the work if you open the outer cover of the spin tub. Close it to resume the spinning.
To do spinning and draining or rinsing with water-filling together, please first do spinning for around 1 minute, then do draining or rinsing with water-filling. Otherwise the spinning will stop owing to too much water stored in the spin tub.
11
Loading...
+ 5 hidden pages