Haier HWM130-9188DD User Manual

Automatic washing machine

This manual is for

HWM130-9188DD

User's manual

Please read this manual
carefully before using.

Retain it for future reference.

Names of the parts 1
Safety precautions 2
Installation and adjustment 4
Preparation before washing
Put in the laundries
Usage of detergent
Usage of the Operation Buttons 10
Close the top lid 15
Finish washing 15
After washing 16
Trouble shooting answer to question 17
Packing list
Specification the back cover

the back cover

Contents

Names of the parts

Meaning and description of the symbols

Warning sign

Forbidding sign

Contents marked with that symbol are related to the safety of the product and
the personal safety of the users. Please operate in strict conformity to the
contents, otherwise it may cause damage of the machine or injure the personal
safety of the user.

Contents marked with that symbol are actions forbidden to perform. Performing
of those actions may result in damage of the machine or injure the personal
safety of the user.

Please understand the shapes of the washing machine and accessories may be different
from the sketch figures in this manual due to product improvement.

1

Outer tub cover

ÄÚ²¿¹¹ÔìºÍ²¿¼þÃû³Æ

Detergent box

Handle

Top lid component

Filter frame

Lint filter

Inner tub

Pulsator

Cabinet

Adjustable leg

Adjustable leg film

Base frame

Power cord

Drain hose

Back cover

Water inlet valve

Water absorption

(3 pieces)

Fixed leg

Control pannel

Liquid detergent inlet

Panel

Hook

Screw cover

Safety precautions

Do not stretch hands into the working machine.
It is dangerous even if the rotation is slow.
Take special care of the children.

Do not decompose, repair or alter the machine
by yourself.

Do not put any hot or heavy items (such as the kettle
with hot water) on the washing machine

Do not wash laundries with volatile materials
(such as thinner, petrol etc.).

Keep the machine away from direct sunlight and
heat source like the heater.

The handicapped or children without care shall not
use the machine.

The lint filter shall be kept in good condition, and
installed to proper position. If the lint filter is lost
or damaged, please contact the local after-sales
service department of our company.

Benzene

Install

Dismantle

2

3

Safety precautions

Soft object

Do not put the machine at damp place like the bathroom.
Never wash it with water. Not put wet laundries on the
control panel.

In case the washing machine is installed on ground with
carpet, do not block the ventilation hole with carpet.

Do not let the machine share one receptacle with other electric appliances. If the power plug is damaged, or the
plugging into the receptacle is loose, do not use the plug any more.

Do not wash water-proof laundries like the raincoat,
bike covers etc. to avoid abnormal vibrations in spinning.

Do not use water hotter than 50 C .

The ventilation

holes at the bottom

Please plug the power plug on special receptacle.
Be sure to use three-pins power receptacle. Ensure
that the earthing prong of the power receptacle is
earthed reliably. Use leakage protector if possible.

The washing machine must be positioned so that
the plug is accessible. Be sure to pull the plug off
and close the water faucet in following cases:
power failure, delivering the machine, setting the
machine idle or cleaning the machine. Do not plug
or pull the power plug with wet hand.

Do not bend ,extend, twist, bind by force. Do not press or nip it with weight.
Keep the pin of the power plug clean, if the power plug is polluted with dust, please wipe with
dry cloth carefully.
If the power cord or the power plug is bad, to avoid risk it is required to have it replaced by
the technicians of our special shop or our customer care agent.

4

Adjust the installation position

The largest allowed slope of the base of the machine is 2 . The slanting or rough
ground will result in unstable running or stoppage of the machine. Please adjust
it with following methods:

Confirm it's horizontal:

Hang the lead line to confirm
if it is horizontal.

Adjust the adjustable foot:

Installation and adjustment

Back

Front

Screw

Bottom plate

Soft items

Install the bottom plate

After opening the package, please lean
the washing machine gently down on soft
items(like to welcloth,blanket,etc.).Install
the bottom plate to the bottom of the
machine with eight screws by across
screwdriver, then lift the machine up
gently. See to the figure:

¡ã