Haier HSU-12HVE03, HSU-12HVE03-R2, HSU-09HV03/R2(DB), HSU-12HVE03/R2(DB), HSU-18HVE03/R2(DB) Operatiing Manual

No, 0010503017

HSU-09HV03/R2(DB)
HSU-12HVE03/R2(DB)
HSU-18HVE03/R2(DB)
HSU-22HVE03/R2(DB)

HSU-07HV03/R2(DB)

2

-21

9

22-26

Cautions
Parts and functions
Operation

Maintenance
Trouble shooting

Contents

1

-5

6-8

27

Before disposing an old air conditioner that
goes out of use, please make sure it's inop­erative and safe. Unplug the air conditioner
in order to avoid the risk of child entrapment.

It must be noticed that air conditioner system
contains refrigerants, which require speciali­zed waste disposal. The valuable materials
contained in an air conditioner can be recycled
.Contact your local waste disposal center for
proper disposal of an old air conditioner and
contact your local authority or your dealer if
you have any question. Please ensure that
the pipework of your air conditioner does not
get damagedprior to being picked up by the
relevant waste disposal center, and contribute
to environmental awareness by insisting on an
appropriate, anti-pollution method of disposal.

Cautions

Disposal of the old air conditioner

All the packaging materials employed in the
package of your new air conditioner may be
disposed without any danger to the
environment.

The cardboard box may be broken or cut into
smaller pieces and given to a waste paper
disposal service. The wrapping bag made of
polyethylene and the polyethylene foam pads

contain no fluorochloric hydrocarbon.

All these valuable materials may be taken to
a waste collecting center and used again after
adequate recycling.

Consult your local authorities for the name
and address of the waste materials collecting
centers and waste paper disposal services
nearest to your house.

Disposal of the packaging of your
new air conditioner

Before starting the air conditioner, read the
information given in the User's Guide caref­ully. The User's Guide contains very impor­tant observations relating to the assembly,
operation and maintenance of the air
conditioner.

The manufacturer does not accept respon­sibility for any damages that may arise due
to non-observation of the following
instruction.

Damaged air conditioners are not to be
put into operation. In case of doubt, consult
your supplier.

Use of the air conditioner is to be carried
out in strict compliance with the relative
instructions set forth in the User's Guide.

Installation shall be done by professional
people, don't install unit by yourself.

For the purpose of the safety,the air con­ditioner must be properly grounded in acco­rdance with specifications.

Always remember to unplug the air
conditioner before openning inlet grill. Never
unplug your air conditioner by pulling on
the power cord. Always grip plug firmly and
pull straight out from the outlet.

All electrical repairs must be carried out
by qualified electricians. Inadequate repairs
may result in a major source of danger for
the user of the air conditioner.

Safety Instructions and Warnings

Do not damage any parts of the air
conditioner that carry refrigerant by piercing
or performating the air conditioner's tubes
with sharp or pointed items, crushing or
twisting any tubes, or scraping the coatings
off the surfaces. If the refrigerant spurts
out and gets into eyes, it may result in
serious eye injuries.

2

3

3. If the fuse of indoor unit on PC board is
broken,please change it with the type of
T. 3.15A/ 250V. If the fuse of outdoor
unit is broken,change it with the type of
T.25A/250V

Do not obstruct or cover the ventilation
grille of the air conditoner.Do not put fingers
or any other things into the inlet/outlet and
swing louver.

Do not allow children to play with the air
conditioner.In no case should children be
allowed to sit on the outdoor unit.

The refrigerating circuit is leak-proof.

1.Applicable ambient temperature range:

Cooling

Indoor

Maximum:D.B/W.B

32oC/23oC

24oC/18oC

-7oC

43oC/26oC
18oC

27oC
15oC

18oC/14oC

Maximum:D.B/W.B
Minimum:D.B

Maximum:D.B
Minimum:D.B

Minimum:D.B/W.B

Maximum:D.B/W.B
Minimum:D.B/W.B

Outdoor

Indoor

Outdoor

Heating

Specifications

The machine is adaptive in following
situation

10 .The power plug and connecting cable
must have acquired the local attestation.

2. If the power supply cord is damaged, it
must be replaced by the manufacturer
or its service agent or a similar qualified
person.

4. The wiring method should be in line with
the local wiring standard.

5. After installation, the power plug should
be easily reached.

6. The waste battery should be disposed
properly.

7. The appliance is not intended for use
by young children or infirm persons
without supervision.

8. Young children should be supervised
to ensure that they do not play with
the applience.

9.Please employ the proper power plug,
which fit into the power supply cord.

Cautions

11.In order to protect the units,please turn
off the A/C first, and at least 30 seconds
later, cutting off the power.

4

Cautions

STRICT
ENFORCEMENT

Safety Instruction

Installation

WARNING

Please read the following Safety Instructions carefully prior to use.

The instructions are classified into two levels, WARNING and CAUTION according to
the seriousness of possible risks and damages as follows. Compliance to the
instructions are strictly required for safety use.

Please call Sales/Service Shop for the Installation.

Do not attempt to install the air conditioner by yourself because improper works
may cause electric shock, fire, water leakage.

lnstallation in a inadequate place may cause accidents. Do not install in the following place.

Connect the earth
cable.

earthing

Do not install in the
place where there is
any possibility of
inflammable gas
leakage around the
unit.

Do not get the unit
exposed to vapor
or oil steam.

Check proper
installation of the
drainage securely

PROHIBITION PROHIBITION

CAUTION

5

Cautions

WARNING

When abnormality such as burnt-small found,
immediately stop the operation button and
contact sales shop.

OFF

Use an exclusive power source with a
circuit breaker

ENFORCEMENT

Connect power supply cord
to the outlet completely

Use the proper voltage

Do not use power supply cord
in a bundle.

Take care not to damage

the power supply cord.

Do not use power supply cord

extended or connected in halfway

STRICT

ENFORCEMENT

STRICT

STRICT

ENFORCEMENT

PROHIBITION

PROHIBITION

PROHIBITION

PROHIBITION

Do not start or stop the
operation by disconnecting
the power supply cord and so on.

Do not channel the air flow directly
at people, especially at infants or
the aged.

Do not try to repair or reconstruct
by yourself.

Do not use for the purpose of storage of
food, art work, precise equipment,
breeding, or cultivation.

CAUTION

Take fresh air occasionally especially
when gas appliance is running at the
same time.

PROHIBITION

STRICT

ENFORCEMENT

Do not operate the switch with
wet hand.

PROHIBITION

PROHIBITION

PROHIBITION

PROHIBITION

PROHIBITION

Do not install the unit near a fireplace
or other heating apparatus.

Check good condition of the
installation stand

Do not pour water onto the unit
for cleaning

PROHIBITION

Do not place animals or plants in
the direct path of the air flow

Do not place any objects on or
climb on the unit.

Do not place flower vase or water
containers on the top of the unit.

Do not insert objects into the air
inlet or outlet.

PROHIBITION

PROHIBITION

PROHIBITION

6

Parts and Functions

OUTLET CONNECTING PIPING AND ELECTRICAL WIRING

INLET DRAIN HOSE

Display board

Inlet

Air Purifying Filter

Vertical flap
(adjust up and down air flow.
Don't adjust it manually)

Horizontal louver

Air filter(inside)

Inlet grille

Power plug

(adjust left and right air flow)

(inside)

Outlet

Anion generator

(inside)

For 18k 22k unit, the power plug is on the outdoor unit

1

2

3

4

Indoor unit

Outdoor unit

HSU-09HV03/R2(DB)
HSU-12HVE03/R2(DB)

HSU-22HVE03/R2(DB)

HSU-07HV03/R2(DB)

HSU-18HVE03/R2(DB)

7

Parts and Functions

Operation mode

AUTO HEAT FANCOOL DRY

Remote controller

Display board

Used to set healthy operation.

10. HEALTH button

Used for unit start and stop.

11. ON/OFF button

12. TIMER ON display

13. FAN SPEED display

LOW HI

MED AUTO

14. LOCK display

15. SWING UP/DOWN display

16. SLEEP display

17. HEALTH display

Used to select your desired temperature.

19. Operation mode display

21. POWER/SOFT display

22. Left/right air flow display

Remote controller: to display the TEMP. setting.

23. TEMP display

24. TIMER OFF display

25. CLOCK display

26. TEMP button

Used to select fan speed: LOW,MED, HI, AUTO.

27. FAN button

Used to set the health airflow mode.

9. HEALTH AIRFLOW button

28. SWING UP/DOWN button

Used to select up or down air sending direction.

29. SWING LEFT/RIGHT button

Used to select left/right air flow.

30.

FRESH

button

Used to confirm timer and clock settings.

31. SET button

32. POWER/SOFT button

Use to set power/soft function.

Use to set fresh air function.

When the remote controller appears abnormal,
use a sharp pointed article to press this button
to reset the remote controller normal.

33. RESET

Used to set clock and timer setting.

8. HOUR button

Used to select CODE A or B with a press,A or B
will be displayed on LCD.
Please select A without special explanation.

3.CODE

Used to select TIMER ON, TIMER OFF,
TIMER ON-OFF.

4. TIMER button

Used to set correct time.

5. CLOCK button

Used to select sleep mode.

6. SLEEP button

7. MODE button

AUTO COOL DRY FAN HEAT

Used to lock buttons and LCD display. If pressed, the
other buttons will be disabled and the lock condition
display appears. Press it once again, lock will be
canceled and lock condition display disappears.

1. LOCK

19 1631 1712 24

18 30

SWING

CODE

TEMP

LOCK RESETLIGHT

TIMER

SET

CLOCK

FRESHSLEEP

MODE

HEALTH FAN

H.AIR.

28

30

20

21

22

23
24

25

27

26

26

29

32

31

19

33

18.FRESH AIR display

20.Singal sending display

2.LIGHT button

Control the lightening and extinguishing of
the indoor LED display board.

NOTE:(1) The following functions and related displays are not available:

(2) Cooling only unit do not have functions and displays related with heating.

8

Remove the batteries in case unit won't be in usage for a long period. If there are any display
after taking-out, just need to press reset key.

Parts and Functions

Clock Set

When unit is started for the first time and after replacing batteries in
remote controller, clock should be adjusted as follows:

Remote controller's operation

3. After time setting is confirmed, press SET, "AM" or "PM" stop flashing,
while clock starts working.

2. Press or to set correct time. Each press will increase or decrease
1 min. If the button is kept depressed, time will change quickly.

1. Press CLOCK button,"AM" or "PM" flashes.

When in use, put the signal transmission head directly to the receiver hole on the indoor unit.

The distance between the signal transmission head and the receiver hole should be within
7m without any obstacle as well.

Don't throw or knock the remoter controller.

When electronic-started type fluorescent lamp or change-over type fluorescent lamp or
wireless telephone is installed in the room, the receiver is apt to be disturbed in receiving
the signals, so the distance to the indoor unit should be shorter.

Loading of the battery

Load the batteries as illustrated right
2 R-03 (7#) batteries

Remove the battery cover:
Slightly press" "area and push down the cover

as illustrated.

Load the battery:
Be sure that the loading is in line with the "+" / "-".

request as illustrated on the bottom of the case.
Put on the cover again.

Confirmation indicator:
After pressing power ON/OFF, if no display, reload the batteries.

Note:

Full display or unclear display during operation indicates the batteries have been used up.
Please change batteries.

Used two new same-typed batteries when loading.

If the remote controller can't run normally during operation, please remove the batteries and
reload several minutes later.

Hint:

9

Operation

2.Health anion function

Air conditioner starts health anion function operation.

For twice press, disappears,the operation stops.

BRIEF INTRODUCTION TO HEALTH ANION FUCTION

The anion generator in the air conditioner can generate a lot of
anion effectively balance the quantity of position and anion in the
air and also to kill bacteria and speed up the dust sediment in
the room and finally clean the air in the room.

When indoor fan motor is running, it has healthy
process function. (It's available under any mode)

Press HEALTH button. For each press, is displayed.

1.Unit start

Press on/off button (" ") on the remote controller, unit starts.

SWING

CODE

TEMP

LOCK RESETLIGHT

TIMER

SET

CLOCK

FRESHSLEEP

MODE

HEALTH FAN

H.AIR.

HEALTH operation

Remote controller

10

Auto Operation

Operation

2.Select operation mode

Press MODE button. For each press, operation mode
changes as follows:

Remote controller:

Then

Select Auto operation

AUTO COOL DRY FAN HEAT

On the displaying board,colorful displaying bar will be white.

1. Unit start

Press on/off button (" ") on the remote controller, unit starts.

About Auto Operation
Under the mode of auto operation, air conditioner will
automatically select Cool or Heat operation according
to room temperature.

4.Unit stop

Press on/off button (" "), the unit stops.

Press FAN button. For each press, fan speed changes as
follows:

Remote controller:

3.Fan speed selection

Air conditioner is running under displayed fan speed.
When FAN is set to AUTO, the air conditioner
automatically adjusts the fan speed according to room
temperature.

LOW

MED

HI

AUTO

Remote controller

SWING

CODE

TEMP

LOCK RESETLIGHT

TIMER

SET

CLOCK

FRESHSLEEP

MODE

HEALTH FAN

H.AIR.

11

Cool Operation

2.Select operation mode

Press FAN button. For each press, fan speed changes as
follows:

Press MODE button. For each press, operation mode
changes as follows:

Remote controller:

Remote controller:

Then Select COOL operation

Press TEMP. button

Every time the button is pressed, temp.setting
increase 1oC,if kept depressed, it will increase
rapidly

Every time the button is pressed, temp.setting
decrease 1oC,if kept depressed, it will decrease
rapidly

Select a desired temperature.

4.Fan speed selection

3.Select temp.setting

5.Unit stop

Air conditioner is running under displayed fan speed.
When FAN is set to AUTO, the air conditioner
automatically adjusts the fan speed according to room
temperature.

AUTO

LOW

MED

HI

AUTO

COOL DRY FAN HEAT

1. Unit start

Operation

On the displaying board,colorful displaying bar will be blue.

Press on/off button (" ") on the remote controller, unit starts.

Remote controller

Press on/off button (" "), the unit stops.

SWING

CODE

TEMP

LOCK RESETLIGHT

TIMER

SET

CLOCK

FRESHSLEEP

MODE

HEALTH FAN

H.AIR.

12

2.Select operation mode

Press FAN button. For each press, fan speed changes as
follows:

Press MODE button. For each press, operation mode
changes as follows:

Remote controller:

Remote controller:

Then Select DRY operation

Press TEMP. button

Every time the button is pressed, temp.setting
increase 1oC,if kept depressed, it will increase
rapidly

Every time the button is pressed, temp.setting
decrease 1oC,if kept depressed, it will decrease
rapidly

Select a desired temperature.

4.Fan speed selection

3.Select temp.setting

5.Unit stop

AUTO

LOW

MED

HI

AUTO

COOL DRY FAN HEAT

Operation

Dry Operation

1. Unit start

On the displaying board,colorful displaying bar will be
light blue

Air conditioner is running under displayed fan speed.
In DRY mode, when room temperature becomes
lower than temp.setting+2oC,unit will run intermittently
at LOW speed regardless of FAN setting.

Press on/off button (" ") on the remote controller, unit starts.

Remote controller

Press on/off button (" "), the unit stops.

SWING

CODE

TEMP

LOCK RESETLIGHT

TIMER

SET

CLOCK

FRESHSLEEP

MODE

HEALTH FAN

H.AIR.

COOL operation starts when room
temp.is higher than temp.setting.

On reaching temp.setting +2oC
unit will run in mild DRY mode.

Ultra-low air flow

Temp.setting+2oC
Temp.setting

13

Fan Operation

2.Select operation mode

Press FAN button. For each press, fan speed changes as
follows:

Press MODE button. For each press, operation mode
changes as follows:

Remote controller:

Remote controller:

Then Select FAN operation

3.Fan speed selection

4.Unit stop

About FAN operation

In FAN operation mode, the unit will not operate in
COOL or HEAT mode but only in FAN mode ,AUTO is
not available in FAN mode.And temp.setting is disabled.
In FAN mode,SLEEP and POWER/SOFT operation is
not available.

AUTO

LOW

MED

HI

COOL DRY FAN HEAT

Operation

1. Unit start

On the displaying board,colorful displaying bar will be pink.

Press on/off button (" ") on the remote controller, unit starts.

Remote controller

Press on/off button(" "), the unit stops.

SWING

CODE

TEMP

LOCK RESETLIGHT

TIMER

SET

CLOCK

FRESHSLEEP

MODE

HEALTH FAN

H.AIR.

5.Unit stop

14

When FAN is set to AUTO, the air conditioner
automatically adjusts the fan speed according to room
temperature.

Press on/off button (" "), the unit stops.

Operation

2.Select operation mode

Press FAN button. For each press, fan speed changes as
follows:

Press MODE button. For each press, operation mode
changes as follows:

Remote controller:

Remote controller:

Then Select HEAT operation

Press TEMP. button

Every time the button is pressed, temp.setting
increase 1oC,if kept depressed, it will increase
rapidly

Every time the button is pressed, temp.setting
decrease 1oC,if kept depressed, it will decrease
rapidly

Select a desired temperature.

4.Fan speed selection

3.Select temp.setting

AUTO

LOW

MED

HI

AUTO

COOL DRY FAN HEAT

Heat Operation

1. Unit start

Air conditioner is running under displayed fan speed
IN HEAT mode, warm air will blow out after a short period
of the time due to cold-draft prevention function.

On the displaying board,colorful displaying bar will be red

Press on/off button (" ") on the remote controller, unit starts.

Remote controller

SWING

CODE

TEMP

LOCK RESETLIGHT

TIMER

SET

CLOCK

FRESHSLEEP

MODE

HEALTH FAN

H.AIR.