Haier HSU-12LEK03-Y3, HSU-09LEK03-Y3, HSU-18LEK03-Y3, HSU-24LEK03-Y2, HSU-10LIN13 Operation Manual

...

Please read this operation manual before using the air conditioner. Keep this operation manual for future reference.

SPLIT TYPE ROOM AIR CONDITIONER OPERATION MANUAL

2 3

PARTS AND FUNCTIONS OPERATION

MAINTENANCE

TROUBLE SHOOTING

CAUTIONS

Contents

HSU-12LQA03/R2(DB)

HSU-09LQA03/R2(DB)

HSU-15LQA13

HSU-10LQA13

HSU-09LQA13/R2(DB)-WT HSU-09LQA13/R2(DB)-BK HSU-12LQA13/R2(DB)-WT HSU-12LQA13/R2(DB)-BK

HSU-12LEK03/R2(DB) HSU-18LEK03/R2(DB)

AS12GS1ERA AS18GS1ERA

HSM24HEK03/R2(DB)

AS12GB2LAA

HSU-10VEK03 HSU-13VEK03 HSU-18VEK03 HSU-24VEK03 AS05GA1LAA AS09GA1LAA AS12GB1LAA AS18GD1LAA

HSU-15LQAB13

HSU-10LQAB13

HSU-09CK3W3N HSU-09LEK03-Y3

HSU-12LEK03-Y3 HSU-18LEK03-Y3 HSU-24LEK03-Y2

HSU-10LIN13 HSU-09LTS14 HSU-12LTS14 HSU-18LTS14 HSU-24LTS14 HSU-07LEK03

HSU-09LEK03/R2(DB) HSU-24LEK03/R2(DB)

HSU-09CK6G2N HSU-09CK6B2N HSU-12CK3W3N HSU-12CKCS3N HSU-12CK6G2N HSU-12CK6B2N HSU-12CKAG3N HSU-12CKAB3N HSU-18CK3W3N HSU-18CK6B2N HSU-18CK6G2N HSU-18CKBS3N HSU-15CKBS5N HSU-18CKBS5N HSU-18CKAB3N HSU-18CKAG3N HSU-15CKAG5N HSU-18CKCS3N HSU-24CK6B2N HSU-13CXAS5N HSU-13CXAS3N HSU-13CXAR3N HSU-13CXBW3N HSU-19CXBW5N HSU-24CXAS3N HSU-19CXAS5N HSU-19CXAS3N

HSU-19CXAR3N HSU-19CXBW3N

0010564364

Outdoor Unit

OUTLET

INLET

CONNECTING PIPING AND ELECTRICAL WIRING

DRAIN HOSE

Actual inlet grille may vary from the one shown in the manual according to the product purchased

Parts and Functions

Indoor Unit

Remote controller

Inlet grille

Air Purifying

Outlet

Horizontal flap

(adjust up and down air flow

Don't adjust it manually)

(adjust left and

ow)

Vertical blade

Filter

Anion

generator

(inside)

right air fl

Inlet

TEMP display

Display board

COOL: blue AUTO: white DRY: cyan

FAN: yellow

: green

Nano-Aquo

Aureole

Display mode，the aureole display different colour when setting different function

Nano-Aquo Generator （inside）

10.

12.

SWING LEFT/RIGHT button

13.

15. SLEEP display

14. HEALTH display

16.

18. POWER/SOFT display

20. TEMP display

21. TIMER OFF/ON

22.

1. Mode display

HEALTH

SLEEP

TIME OFF

TIME ON

/QUIET

SWING

Operation mode

AUTO

FAN

COOL DRY

Remote controller

2. Signal sending display

4.FAN SPEED display

5. LOCK display

6. TIMER OFF display TIMER ON display

7. TEMP display

3. SWING display

LO MED HI

AUTO

Display circulated

Additional functions display

Operation mode

Remote controller

QUIET

TURBO

SLEEP

Supplemented electrical heating

HEALTH

9. TURBO/QUIET button FAN button

11. COOL button

FAN SPEED button

LOCK

button

Control the lightening and extinguishing of the indoor LED display board.

17. LIGHT button

19. DRY button

displa

SWING UP/DOWN

button

23.HEALTH AIR FLOW

button

24.CANCEL/CONFIRM button Function: Setting and cancel to the

timer and other additional functions.

25. RESET button When the remote controller appears abnormal, use a sharp pointed article to press this button to reset the remote.

Healthy function is not available for some units.

Loading of the battery

1 2

Remove the battery cover;

Load the batteries as illustrated.

2 R-03 batteries, resetting key

(cylinder);

Be sure that the loading is in line with th

e" + "/"-";

Load the battery,then put on the cover again.

The distance between the signal transmission head and the receiver hole should be within 7m without any obstacle as well.

When electronic-started type fluorescent lamp or change- over

wireless telephone is installed in the

ver is apt to be disturbed in receiving

the signals,

so the distance to the indoor unit should be shorter.

type fluorescent lamp or room, the recei

Note:

Full display or unclear display during operation indicates the

ries have been used up.

Please change batteries.

If the remote controller can't run normally during operation, please

reload several minutes later.

batte

remove the batteries and

TURBO

Display board

(adjust left and

ow)

Vertical blade

right air fl

Air Purifying Filter

Inlet

(inside)

Emergency

Switch

Horizontal flap

(adjust up and down air flow Don't adjust it manually)

Outlet

Inlet grille

Display board

Signal receiver hole

ON/OFF display

2 3

TIMER ON\OFF display

SLEEP display

Ambient temp.display

When receiving the remote

control signal, display the set

displayed.

time the room temperature is

temperature and in the rest

Note to the power failure resume:

press the sleep button ten times in five seconds and enter function after hearing four sounds.And press the sleep button ten times within five seconds and leave this function after hearing

TIMER ON-OFF display

COOL\HEAT\Dry\AUTO display

two sounds.

(adjust left and

ow)

Vertical blade

ight air fl

Air Purifying Filter

Inlet

(inside)

Emergency

Switch

Horizontal flap

(adjust up and down air flow Don't adjust it manually)

Outlet

Inlet grille

(inside)

Power indicator

Timer mode indicator

Operation mode indicator

(Lights up when unit starts.)

(Lights up whenTimer operation is selected.)

(lights up when the compressor is on.)

Remote signal receiver

(A beeping sound is generated when a signal from remote controller isreceived.)

Ambient temp display

When receiving the remote control signal, display the set temperature and in the rest time the room temperature is displayed and this room temperature is only for reference.

Anion generator

9 10 11

Operation

Air Flow Direction Adjustment

Base Operation

Remote controller

Emergency operation and test operation

Emergency Operation:

Use this operation only when the remote controller is defective or lost, and with function of emergency running, air conditoner can run automatically for a while. When the emergency operation switch is pressed, the " Pi " sound is heard once, which means the start of this operation. When power switch is turning on for the first time and emergency operation starts, the unit will run automatically in the following modes:

It is impossible to change the settings of temp. and fan speed,It is also not possible to operate in timer or dry mode.

HEALTH

SLEEP

TIME OFF

TIME ON

TURBO

/QUIET

SWING

Press FAN button. For each press, fan speed

follows:

Remote controller:

Press

button

Every time the button is pressed, temp.setting increase 1

C,if kept depressed, it will increase

rapidly

Every time the button is pressed, temp.setting

decrease 1

C,if kept depressed, it will

decrease rapidly

Select a desired temperature.

4.Fan speed selection

3.Select temp.setting

Air conditioner is running under displayed fan speed. When FAN is set to AUTO, the air conditioner automatically adjusts the fan speed according to room temperature.

1. Unit start

Press ON/OFF on the remote controller, unit starts.

2. Select operation mode

COOL button:Cooling mode FAN button: Faning mode DRY button: Dehumidify mode

Display

circulated

changes as

LOW

MED HI

AUTO

Remote

Controller

Note

In DRY mode , when room temperature becomes lower than temp.setting+2

C, unit will run intermittently at LOW

speed regardless of FAN setting.

Under the mode of auto operation, air conditioner will automatically select Cool or Heat operation according to

room temperature. When FAN is set to AUTO the air conditioner automatically adjusts the fan speed according to room temperature.

In FAN operation mode , the unit will not operate in COOL or

HEAT mode but only in

FAN mode, AUTO is not available in FAN mode. And temp. setting is disabled. In FAN mode, sleep operation is not available.

Operation

Mode

DRY

COOL

AUTO

FAN

temperature.

according to room

temperature is below 16

C, do not use it in the

Test operation:

Use this switch in the test operation when the room

normal operation.

your finger from the switch: the cooling

Continue to press the test operation

switch for more than 5 seconds . After

you hear the "Pi" sound twice,

release

Test ope ration switch is the same as emergency switch.

operation starts with the air flow speed "Hi".

Under this operation mode,the fan motor of indoor

unit will run in high speed.

Pi Pi

Room temperature

Designated temperature

Timer mode

Fan

speed

Operation

mode

Above 23oC 26oC AUTO COOL

When restart after remote turning off, the remote controller

When adjusting the flap by hand,turn off the unit.

When humidity is high,condensate water might occur

It is advisable not to keep horizontal flap at downward position for a long time in COOLor DRY

otherwise, condensate water might occur.

adjusted to left or at air outlet if all vertical louvers are right.

mode ,

controller will automatically memorize the previous set swing position.

Note:

Vertical flap

Pos.1

(Auto

swing)

1.Status display of air flow

2.Left and right air flow adjustment

Pos.1

Pos.2

Pos.3

Pos.4

Pos.5

Pos.6

For each press of button, remote controller displays as follows :

remote controller:

Cautions:

Initial state

Pos.2 No initial state disaplayed on remote controller, the

vertical flap will be fixed on the current position

+ 5 hidden pages

Haier HSU-12LEK03-Y3, HSU-09LEK03-Y3, HSU-18LEK03-Y3, HSU-24LEK03-Y2, HSU-10LIN13 Operation Manual

Specifications and Main Features

Frequently Asked Questions

User Manual