Haier HSU-09RQ03, HSU-09RQ03/R2, HSU-07RE03/R2, HSU-09RE03/R2, HSU-12RE03/R2 Operatiing Manual

HSU-07RE03/R2
HSU-09RE03/R2
HSU-12RE03/R2
HSU-18RE03/R2
HSU-22RE03/R2

No, 0010515888

HSU-09RF03/R2
HSU-12RF03/R2

HSU-09RQ03/R2



X

HSU-09RQ03/R2

0.419

HSU-09RE03/R2

0.352

HSU-12RE03/R2

0.282

HSU-18RE03/R2

0.179

HSU-22RE03/R2

0.184

CE

Tutti i prodotti sono conformi alle seguenti normative europee:

- Direttiva 73/23/EEC Basso Voltaggio

- Direttiva 2006/95/EC Basso Voltaggio

- Direttiva 89/336/EEC Compatibilità elettromagnetica

- Direttiva 2004/108/EC Compatibilità elettromagnetica

ROHS

Il prodotto è conforme alla normativa 2002/95/EEC sulla restrizione d’uso di
sostanze inquinanti negli apparecchi elettrici ed elettronici.

WEEE

Informativa al consumatore come previsto dalla normativa europea
2002/96/CE riguardante i rifiuti di apparecchiature elettriche ed elettroniche.

SPECIFICHE DI SMALTIMENTO:

Il climatizzatore è contrassegnato con questo simbolo,
ciò significa che i prodotti elettrici ed elettronici non
possono essere smaltiti insieme ai rifiuti domestici non
differenziati. Non cercare di demolire il sistema da soli:
la demolizioni dei sistemi di condizionamento, nonché il
recupero del refrigerante, dell’olio e di qualsiasi altra
parte devono essere eseguiti da un installatore qualifi-

cato in conformità alla legislazione locale e nazionale
vigente in materia.I climatizzatori devo essere trattati presso una struttura spe­cializzata nel riutilizzo, riciclaggio e recupero dei materiali. Il corretto smaltimen­to del prodotto eviterà le possibili conseguenze negative all’ambiente e alla
salute dell’uomo. Per maggiori informazioni contattare l’installatore o le autori­tà locali. Le batterie devono essere tolte dal telecomando e smaltite separata­mente conformemente alla legislazione locale e nazionale vigente in materia.

CONFORMITÀ ALLE DIRETTIVE EUROPEE PER I MODELLI:

Haier Industrial Park, No.1 Haier Road, Qingdao, P.R.China

IT

CE

All the products are in conformity with the following European provision:

- Low Voltage Directive 73/23/EEC

- Low Voltage Directive 2006/95/EC

- Electromagnetic CompatibilitY 89/336/EEC

- Electromagnetic CompatibilitY 2004/108/EC

ROHS

The products are fulfilled with the requirements in the directive 2002/95/EEC of the
European parliament and of the council on the Restriction of the use of Certain Haz­ardous Substances in Electrical and Electronic Equipment (EU RoHS Directive)

.

WEEE

In accordance with the directive 2002/96/CE of the European parliament,
herewith we inform the consumer about the disposal requirements of the
electrical and electronic products.

DISPOSAL REQUIREMENTS:

Your air conditioning product is marked with this sym-

bol. This means that electrical and electronic products

shall not be mixed with unsorted household waste.

Do not try to dismantle the system yourself: the dis-

mantling of the air conditioning system, treatment of

the refrigerant, of oil and of other part must be done

by a qualified installer in accordance with relevant

local and national legislation. Air conditioners must be
treated at a specialized treatment facility for re-use, recycling and recovery.
By ensuring this product is disposed of correctly, you will help to prevent
potential negative consequences for the environment and human health.
Please contact the installer or local authority for more information. Battery
must be removed from the remote controller and disposed of separately in
accordance with relevant local and national legislation.

EUROPEAN REGULATIONS CONFORMITY FOR THE MODELS:

EN

CE

Tous les produits sont conformes aux directives européennes suivantes:

- Directive 73/23/CEE Basse tension

- Directive 2006/95/CE Basse tension

- Directive 89/336/CEE Compatibilité électromagnétique

- Directive 2004/108/CE Compatibilité électromagnétique

ROHS

L'appareil est conforme à la directive 2002/95/CEE relative à la limitation de
l'utilisation de certains substances dangereuses dans les équipements élec­triques et électroniques.

DEEE (WEEE)

Information au consommateur comme le prévoit la directive européenne
2002/96/CE relative aux déchets d'équipements électriques et électro­niques.

SPECIFICATIONS POUR L'ELIMINATION:

Ce pictogramme, apposé sur le climatiseur, signifie

que les équipements électriques et électroniques ne

peuvent pas être éliminés avec les déchets ménagers

non triés. Ne pas essayer de démanteler l'équipement

soi-même: le démantèlement des systèmes de clima-

tisation, ainsi que la récupération du frigorigène, de

l'huile et de toute autre partie doivent être effectués

par un installateur qualifié conformément à la législa­tion locale et nationale en vigueur en la matière. Les climatiseurs doivent être
traités dans un centre spécialisé dans la réutilisation, le recyclage et la valo­risation des matériaux. L'élimination correcte de ces appareils permet d'évi­ter les effets nocifs sur l'environnement et la santé humaine. Pour plus de
renseignements contacter l'installateur ou les autorités locales. Les piles doi­vent être retirées de la télécommande et éliminées séparément, conformé­ment à la législation locale et nationale en vigueur en la matière.

CONFORMITÉ AUX DIRECTIVES EUROPÉENNES POUR LES MODÈLES:

FR

Haier Industrial Park, No.1 Haier Road, Qingdao, P.R.China

CE

Todos los productos están en conformidad con las siguientes Normativas
Europeas:

- Bajo Voltaje directiva 73/23/EEC

- Bajo Voltaje directiva 2006/95/EC

- Compatibilidad electromagnética 89/336/EEC

- Compatibilidad electromagnética 2004/108/EC

ROHS

Los productos cumplen los requisitos de la directiva 2002/95/EEC del parla­mento Europeo y el consejo regulador Del uso de materiales peligrosos en
equipamientos eléctricos Y electrónicos. (EU RoHS Directiva).

WEEE

De acuerdo con la directiva 2002/96/CE del parlamento Europeo, Informa­mos al consumidor acerca del reciclage de los productos Electrónicos y
eléctricos.

REQUISITOS PARA LA ELIMINACIÓN:

Su acondicionador de aire está marcado con este

símbolo. Esto significa que los productos eléctricos y

electrónicos no deben mezclarse con el resto de resi-

duos domésticos no clasificados.

No intente desmontar el sistema usted mismo: El des-

mantelamiento del acondicionador de aire, así como

el tratamiento del refrigerante, aceite y otros compo-

nentes, debe ser efectuado por un instalador compe­tente de acuerdo con las normas locales y nacionales aplicables. Los acon­dicionadores de aire deben ser tratados en instalaciones especializadas para
su reutilización, reciclaje y recuperación. Al asegurarse de desechar este pro­ducto de la forma correcta, està contribuyendo a evitar posibles consecuen­cias negativas para el entorno y para la salud de las personas. Contacte, por
favor, con el instalador o con las autoridades locales para obtener más infor­mación. Las pilas del control remoto deben extraerse y eliminarse por sepa­rado y de acuerdo con la normativa local y nacional aplicable.

CONFORMIDAD EUROPEA DE LAS REGULACIONES PARA LOS MODELOS:

ES

Questo prodotto contiene gas fluorurati ad effetto serra inclusi nel Protocollo
di Kyoto. Non liberare tali gas nell’atmosfera.

Tipo di refrigerante: R410A
Valore GWP*: 1975
*

GWP = potenziale di riscaldamento globale

Compilare con inchiostro indelebile,

• 1 la carica di refrigerante di fabbrica del prodotto

• 2 la quantità di refrigerante aggiuntiva nel campo e

• 1+2 la carica di refrigerante totale
sull’etichetta di carica del refrigerante fornita con il prodotto

L’etichetta compilata deve essere collocata in prossimità della portata di cari­ca del prodotto (ad esempio, nell’interno del coperchio della valvola d’inter­cettazione).

A contiene gas fluorurati ad effetto serra inclusi nel protocollo di Kyoto
B carica di refrigerante di fabbrica del prodotto: vedi targhetta con il nome

dell’unità
C quantità di refrigerante aggiuntiva nel campo
D carica di refrigerante totale
E unità esterna
F cilindro del refrigerante e collettore di carica

INFORMAZIONI IMPORTANTI SUL REFRIGERANTE UTILIZZATO

Haier Industrial Park, No.1 Haier Road, Qingdao, P.R.China

1

1+2=

kg

R410A

2

kg

2=

1=

B

C

D

FE

kg

Contains fluorinated greenhouse gases
covered by the Kyoto Protocol

A

This product contains fluorinated greenhouse gases covered by the Kyoto
Protocol. Do not vent into the atmosphere.

Refrigerant type: R410A
GWP* value: 1975
*

GWP = global warming potential

Please fill in with indelible ink,

• 1 the factory refrigerant charge of the product

• 2 the additional refrigerant amount charged in the field and

• 1+2 the total refrigerant charge
on the refrigerant charge label supplied with the product.

The filled out label must be adhered in the proximity of the product charging
port (e.g. onto the inside of the stop valve cover).

A contains fluorinated greenhouse gases covered by the Kyoto Protocol
B factory refrigerant charge of the product: see unit name plate
C additional refrigerant amount charged in the field
D total refrigerant charge
E outdoor unit
F refrigerant cylinder and manifold for charging

IT

IMPORTANT INFORMATION REGARDING THE REFRIGERANT USED

EN

Ce produit contient des gaz à effet de serre fluorés encadrés par le protoco­le de Kyoto. Ne pas laisser les gaz s’échapper dans l’atmosphère.

Type de réfrigérant: R410A
Valeur GWP*: 1975
*

GWP = potentiel de réchauffement global

Prière de compléter à l’encre indélébile,

• 1 la charge de réfrigérant d’usine du produit

• 2 la quantité de réfrigérant supplémentaire chargée sur place et

• 1+2 la charge de réfrigérant totale
sur l’étiquette de charge de réfrigérant fournie avec le produit.

L’étiquette complétée doit être apposée à proximité de l’orifice de recharge
du produit (par ex. à l’intérieur du couvercle de la vanne d’arrêt).

A contient des gaz à effet de serre fluorés encadrés par le protocole de

Kyoto
B charge de réfrigérant d’usine du produit: voir plaquette signalétique de

l’unité
C quantité de réfrigérant supplémentaire chargée sur place
D charge de réfrigérant totale
E unité extérieure
F cylindre de réfrigérant et collecteur de recharge

INFORMATION IMPORTANTE RELATIVE AU RÉFRIGÉRANT UTILISÉ

FR

Haier Industrial Park, No.1 Haier Road, Qingdao, P.R.China

1

1+2=

kg

R410A

2

kg

2=

1=

B

C

D

FE

kg

Contains fluorinated greenhouse gases
covered by the Kyoto Protocol

A

Este producto contiene los gases fluorados de efecto invernadora regulados
por el Protocolo de Kioto. No vierta gases a la atmósfera.

Tipo de refrigerante: R410A
Valor GWP*: 1975
*

GWP = Potencial de calentamiento global

Rellene con tinta indeleble,

• 1 la carga de refrigerante de fábrica del producto

• 2 la cantidad adicional de refrigerante cargado en campo y

• 1+2 la carga total de refrigerante
En la etiqueta de carga de refrigerante suministrada con el producto.

La etiqueta rellenada debe pegarse cerca de la conexión de carga del pro­ducto (p.ej. en el interior de la cubierta de la válvula de tope).

A Contiene los gases fluorados de efecto invernadora regulados por el

Protocolo de Kioto
B Carga de refrigerante de fábrica del producto: véase placa de especifi-

caciones técnicas de la unidad
C Cantidad adicional de refrigerante cargado en campo
D Carga total de refrigerante
E Unidad exterior
F Cilindro del refrigerante y dosificador de carga

INFORMACIÓN IMPORTANTE EN RELACIÓN AL REFRIGERANTE UTILIZADO

ES

2
3-5

6-14
15-16

17

Cautions
Parts and functions
Operation

Maintenance
Trouble shooting

Contents

1

Maximum: D.B

10.The appliance must be installed on strong enough supporter.

9.Young children should be supervised ensure that they do not play with the appliance.

8. The appliance is not intended to use by young children or infirm persons without supervision.

7. The waste battery should be disposed properly.

6. After installation, the power plug should be easily reached.

5. The wiring method should be in line with the local wiring standard.

4. The distance between the indoor unit and the floor should be more than 2m.

3. If the fuse on PC board is broken please change it with the type of T. 3.15A/250V.

11.The wiring diagram is attached inside the machine.

or a similar qualified person. The type of connecting wire is H05RN-F or H07RN-F

2. If the supply cord is damaged, it must be replaced by the manufacturer or its service agent

The machine is adaptive in following situation

I. Applicable ambient temperature range:

Cooling

Heating

Indoor

Outdoor

Outdoor

Indoor

Maximum: D.B / W.B 32

o

C/23oC

18oC/14oC
43

o

C/26oC

18

o

C

27

o

C

15

o

C

24

o

C/18oC

-7

o

C/-8oC

Minimum: D.B / W.B

Minimum: D.B
Maximum: D.B
Minimum: D.B
Maximum: D.B / W.B
Minimum: D.B / W.B

Cautions

2

Indoor Unit

Outdoor Unit

Inlet grille

Air filter

Vertical flap

Power indicator

Timer mode indicator

Operation mode indicator

Remote signal receiver

Emergency switch(manual)

Test running switch(manual)

Use remote controller to
adjust up and down air flow.
(Don't adjust it manually.)

Lights up when unit starts.

Lights up when Timer operation
is selected.

Lights up during compressor
running.

A beeping sound is generated when
a signal from remote controller is
received.

Used when remote controller is lost or
defective. Unit will run temporarily.

Used only for test running in cooling
when room temp. is below 16

o

C.

Don't use it in normal operation.

OUTLET

INLET

CONNECTING PIPING AND ELECTRICAL WIRING

DRAIN HOSE

Actual inlet grille may vary from the one shown in the manual according to
the product purchased

Parts and Functions

3

HSU-07RE03/R2
HSU-09RE03/R2
HSU-12RE03/R2
HSU-09RF03/R2

HSU-18RE03/R2

HSU-22RE03/R2
HSU-12RF03/R2
HSU-09RQ03/R2

FAN

DRY
HEAT

COOL

AUTO

Operation

1. Mode display

2. SWING display

3. FAN SPEED display

4. SLEEP display

5. LOCK display

6. SIGNAL SENDING

7. TIMER OFF display

8. TIMER ON display

9. CLOCK display

10. TEMP display

11. POWER ON/OFF

Used for unit start and stop.

12. MODE

Used to select AUTO run, COOL,
DRY, HEAT and FAN operation

13. FAN

Used to select fan speed LO, MED, HI, AUTO

14. HOUR

Used to set clock and timer setting.

15. SWING

Used to set auto fan direction.

16. SLEEP

Used to select sleep mode.

17. LOCK

Used to lock buttons and LCD
display.

18. TEMP.

Used to select your desired temp.

19. SET

Used to confirm timer and clock settings.

20. TIMER

Used to select TIMER ON, TIMER OFF,
TIMER ON-OFF

21. CLOCK

Used to set correct time

22. RESET

normal condition.

Used to reset the controller back to

Clock set

When unit is started for the first time and after replacing batteries in remote controller,
clock should be adjusted as follows:
Press CLOCK button, "AM" or "PM" flashes.
Press or to set correct time. Each press will increase or decrease 1min. If the
button is kept depressed, time will change quickly.
After time setting is confirmed, press SET, "AM "and "PM" stop flashing, while clock
starts working.

Hints

After replacing with new batteries, remote controller will conduct self-check, displaying
all information on LCD. Then, it will become normal.

NOTE: Cooling only unit do not have displays and functions related with heating

Buttons and display of the remote controller.

LO MED HIAUTO

ON/OFF

TEMP

MODE SET

FAN

TIMER

SWING

CLOCK

SLEEP

LOCK RESET

5

6
7

8

9

10

18

19

20

21

22

4

1

2
3

11

12

13

14

15

16

17

A
U
T
O

ON OFF

Parts and Functions

4

o

C

AM

PM

Operation

Buttons and display of the remote controller.

like the following figure:

If the unit which you purchased has healthy function, Remote controller should

BRIEF INTRODUCTION TO HEALTH OPERATION

The anion generator in the air conditioner can generate a lot of anion to
effectively balance the quantity of position and anion in the air and also to kill
bacteria and speed up the dust sediment in the room and finally clean the air
in the room.

Hints

After replacing with new batteries, remote controller will conduct self-check, displaying
all information on LCD. Then, it will become normal.

23. HEALTH

Used to set healthy operation

NOTE: Cooling only unit do not have displays and functions related with heating

HEALTH

ON/OFF TEMP

MODE SET

FAN TIMER

SWING CLOCK

SLEEP

LOCK RESET

4

1

2
3

11

12

13

14

15

16

17

5

6
7

8

9

10

19

21

22

18

20

A
U
T
O

ON

OFF

Parts and Functions

FAN

DRY
HEAT

COOL

AUTO

1. Mode display

2. SWING display

3. FAN SPEED display

4. SLEEP display

5. LOCK display

6. SIGNAL SENDING

7. TIMER OFF display

8. TIMER ON display

9. CLOCK display

10. TEMP display

11. POWER ON/OFF

Used for unit start and stop.

12. MODE

Used to select AUTO run, COOL,
DRY, HEAT and FAN operation

13. FAN

Used to select fan speed LO, MED, HI, AUTO

14. HOUR

Used to set clock and timer setting.

15. SWING

Used to set auto fan direction.

16. SLEEP

Used to select sleep mode.

17. LOCK

Used to lock buttons and LCD
display.

18. TEMP.

Used to select your desired temp.

19. SET

Used to confirm timer and clock settings.

20. TIMER

Used to select TIMER ON, TIMER OFF,
TIMER ON-OFF

21. CLOCK

Used to set correct time

22. RESET

normal condition.

Used to reset the controller back to

LO MED HIAUTO

5

o

C

AM
PM

Remote controller's operation

When in use, put the signal transmission head directly to the
receiver hole on the indoor unit.

The distance between the signal transmission head and the
receiver hole should be within 7m without any obstacle as well.

Don't throw the controller, prevent it from being damaged.

When electronic-started type fluorescent lamp or change-over
type fluorescent lamp or wireless telephone is installed in the
room, the receiver is apt to be disturbed in receivering the signals
so the distance to the indoor unit should be shorter.

Loading of the battery

Load the batteries as illustrated. 2 R-03 batteries, resetting key (cylinder)

Remove the battery cover:

Slightly press " " and push down the cover.

Load the battery:

Be sure that the loading is in line with the" + "/"-"
pole request as illustrated.

Put on the cover again
Confirmation indicator:

In disorderation, reload the batteries or load the new batteries after 6mins.

Note:

Use two new same-typed batteries when loading.
If the remote controller can't run normally or doesn't work at all,
use a sharp pointed item to press the reset key.

Hint:

Remove the batteries in case unit won't be in usage for a long period.
If there are any display after taking-out just need to press reset key.

Power failure resume(please set and apply as necessary)

If sudden power failure occurs, the unit will resume original operation when power is

supplied again.

Note:

When sudden power failure happens during unit operation in power failure resume mode, if

the air conditioner is not desired for use in a long period, please shut off the power supply

in case that the unit automatically resume operation when power is re-supplied, or press

ON/OFF to turn off the unit when power resumes.

Operation

6

(4) Unit stop

(1) Unit start

Auto run, Fan operation

Enjoy yourself by just a gentle press.

mode changes as follows:

Press ON/OFF button, unit starts.
Previous operation status appears on display.
(Not Timer setting)
Power indicator on indoor unit lights up.

(2) Select operation mode

Press MODE button. For each press, operation

AUTO COOL DRY HEAT FAN

Unit will run in selected mode.
Stop display at " " AUTO or " "FAN.

(3) FAN

Press FAN button. For each press, fan speed changes
as follows:

AUTO LO MED HI

Unit will run at selected fan speed.

Note:AUTO is not available in FAN mode.

Press ON/OFF button.
Only time remains on LCD.
All indicators on indoor unit go out.
Vertical flap closed automatically.

Hints

Remote controller can memorize settings in each operation mode. To run it next time just
select the operation mode and it will start with the previous setting.
No reelecting is needed.(TIMER ON/OFF needs reelecting)

Cautions: Note:
On cooling only unit, heating mode is not available, The above information is the

After replacing batteries, press ON/OFF, and display explanation of the displayed
becomes as follows: information therefore varies
Operation mode: AUTO, Temp. No with those displayed in actual
Timer mode: No, Fan speed :AUTO operation.

ON/OFF TEMP

SET

TIMER

CLOCKSWING

SLEEP

LOCK

RESET

FAN

MODE

1

2

3

4

Operation

7

AM

HEALTH

Press MODE button. For each press, operation

Recommendations:

COOL,HEAT and DRY operation

Use COOL in summer. Use HEAT in winter

Use DRY in spring, autumn and in damp climate.

(1) Unit start

mode changes as follows:

Press ON/OFF button, unit starts.
Previous operation status appears on display.(Not Timer setting)
Power indicator on indoor unit lights up.

(2) Select operation mode

AUTO COOL DRY HEAT FAN

Unit will run in operation mode displayed on LCD.
Stop display at your desired mode.

(3) Select temp. setting

Press TEMR button.

Every time the button is pressed, temp. setting increases 1

o

C

Every time the button is pressed, temp. setting decreases 1

o

C

Unit will start running to reach the temp. setting on LCD.

Press FAN button. For each press, fan speed changes

(4) Fan speed selection

as follows:

AUTO LO MED HI

just press ON/OFF button and unit will run in previous status.

Unit runs at the speed displayed on LCD.

Hints

On cooling only unit, heating mode is not available.
Remote controller can memorize each operation status. When starting it next time,

COOL operation starts when room
temp. is higher than temp. setting.

Ultra-low air flow

Temp. setting+2

o

C

Temp. setting

On reaching temp. setting, unit
will run in mild DRY mode.

ON/OFF TEMP

SET

TIMER

CLOCKSWING

SLEEP

LOCK

RESET

FAN

MODE

In DRY mode, when room temperature becomes
lower than temp.setting+2oC,unit will run intermittently
at LOW speed regardless of FAN setting.

1

2

3

4

3

5

6

Operation

8

o

C

AM

HEALTH

(5) Air flow direction adjustment

After operation mode is selected, vertical flap will open automatically according to the mode.
Referring to the Fig.

COOL

HEAT

COOL

HEAT

About 10

o

About 10

o

better set a temp. difference of 3-5oC between indoor and outdoor temp. in COOL mode.

Hints

As cold air flows downward in COOL mode, adjusting air flow horizontally will be much more

helpful for a better air circulation.

As warm air flows upward in HEAT mode, adjusting air flow downward will be much more

helpful for a better air circulation.

Be careful not to catch a cold when cold air blows downward.

It is harmful to your health in summer to go frequently in and out of places where temp.

difference is above 7

o

C. Temp. difference of 3-5oC will remove your fatigue.

More than this, unit's load can be reduced and power consumption cut down as well. So, you'd

(6) Unit stop

Press ON/OFF button.
Only time remains on LCD.
All indicators on indoor unit go out.
Vertical flap closes automatically.

Cautions:

Unit won't restart until 3 minutes have
elapsed, due to system protection.
HEAT mode is not available on
cooling only unit.

It is advisable not to keep vertical flap at

downward position for a long time in COOL

or DRY mode, otherwise, condensate

water might occur.

Cautions:

Cautions:

When humidity is high, condensate water

might occur at air outlet if all horizontal

louvers are adjusted to left or right.

Move the horizontal blade by a knob on air

conditioner to adjust left and right direction

referring to Fig.

Left and right air flow adjustment
(manual)

Press SWING button, vertical flap will move within

the range shown in the Fig. Press SWING button

stop it at a fixed position.

Up and down (Use remote controller)

About 45

o

About 60

o

About 60

o

Operation

9

TIMER Operation

You can let unit start or stop automatically at following times: Before you wake up in the
morning, or get back from outside or after you fall asleep at night.

Set Clock correctly before starting Timer operation

TIMER ON/OFF

Power indicator on indoor unit lights up.

(1)After unit start, select your desired operation mode.
Operation mode will be displayed on LCD.

(2)TIMER mode selection

Press TIMER button to change TIMER mode.
Every time the button is pressed, display changes as follows:

ON OFF ON OFF

TIMER ON TIMER OFF TIMER ON-OFF

blank

Select your desired TIMER mode (TIMER ON or TIMER

OFF) ON or OFF will flash.

(3)Timer setting

Press HOUR / button.

Every time the button is pressed, time increases 10 min.

If button is kept depressed, time will change quickly.

Every time the button is pressed, time decreases 10 min.
If button is kept depressed, time will change quickly. Time
will be shown on LCD. It can be adjusted within 24 hours.

Timer mode indicator on indoor unit lights up.

(4)Confirming your setting

After setting correct time, press SET button to confirm, "ON"
or "OFF" stops flashing
Time displayed: Unit starts or stops at x hour x min. (TIMER
ON or TIMER OFF).

To cancel TIMER mode

Just press TIMER button several times until TIMER mode disappears.

Hints

After replacing batteries or a power failure happens, Time setting should be reset.

Remote controller possesses memory function, when use TIMER mode next time, just

press SET button after mode selecting if timer setting is the same as previous one.

ON/OFF TEMP

SET

TIMER

CLOCKSWING

SLEEP

LOCK

RESET

FAN

MODE

ON

1

2

3

4

3

Operation

10

o

C

AM

HEALTH

TIMER ON-OFF

To cancel TIMER mode

Power indicator on indoor unit lights up.

(1)After unit start, select your desired operation mode
Operation mode will be displayed on LCD.

ON OFF ON OFF

TIMER ON TIMER OFF TIMER ON-OFF

blank

Every time the button is pressed, display changes as follows:

(2) Press TIMER button to change TIMER mode.

Select TIMER ON-OFF. "ON" will flash.

(3)Time setting for TIMER ON

If button is kept depressed, time will change quickly.

Every time the button is pressed, time decreases 10 min.

If button is kept depressed, time will change quickly.

Every time the button is pressed, time increases 10 min.

It can be adjusted within 24 hours.

Time will be shown on LCD.

AM refers to morning and PM to afternoon

Press HOUR button.

(4) Time confirming for TIMER ON

After time setting, press TIMER button to confirm.
"ON" stops blinking, While "OFF" starts blinking.
Time displayed: Unit starts at x hour x min.

(5)Time setting for TIMER OFF

Follow the same procedures in "Time setting for TIMER ON".

(6) Time confirming for TIMER OFF

After time setting, press SET button to confirm, "OFF" stops flashing

Time displayed: Unit stops at X hour X min.

Just press TIMER button several times until TIMER mode disappears.

ON/OFF TEMP

SET

TIMER

CLOCKSWING

SLEEP

LOCK

RESET

FAN

MODE

ON

1

2

4

3

5

6

Operation

11

o

C

AM

HEALTH

*'#.6*/QFGQRGTCVKQP

2TGUUVJG101((UYKVEJ

2TGUUVJG*'#.6*QPEG 
KUFKURNC[GFPQYVJGCKTEQPFKVKQPGT
KUQRGTCVKPIVJGJGCNVJHWPEVKQP

2TGUUVJG*'#.6*CICKPVJGP
VJGJGCNVJHWPEVKQPUVQRU

6JGCPKQPIGPGTCVQTKPVJGCKTEQPFKVKQPGTECPIGPGTCVGCNQVQHCPKQPVQ
GHHGEVKXGN[DCNCPEGVJGSWCPVKV[QHRQUKVKQPCPFCPKQPKPVJGCKTCPFCNUQVQMKNN
DCEVGTKCCPFURGGFWRVJGFWUVUGFKOGPVKPVJGTQQOCPFHKPCNN[ENGCPVJGCKT
KPVJGTQQO

$4+'(+0641&7%6+10

61*'#.6*12'4#6+10

Operation

12

+($/7+

212)) 7(03

02'(

6(7

)$1 7,0(5

6:,1* &/2&.

6/((3

/2&. 5(6(7

$
8
7

2

R

&

$0

1

2

Emergency Operation:

Pi Pi

Emergency operation and test operation

Carry out this operation only when the remote controller is defective or lost.
When the emergency operation switch is pressed, a" Pi "sound starts once, which
means the start of this operation.
In this operation, it is not possible to change the
settings of temperature and air flow speed, it is
also impossible to do an operation by the timer.
Follow the requirements below.

Room
temperature

Designated
temperature

Timer
mode

Air flow
speed

Operation
mode

More than 23oC

Less than 23

o

C 23oC

26

o

C

CONTINUOUS

CONTINUOUS

AUTO

AUTO

COOL

HEAT

Pi

Heating when the room temperature at the start of operation is below 23

o

C

If an air conditioner is a model for both cooling and heating.

Cooling when the room temperature at the start of operation is above 23oC.

temperature is less 16

o

C, do not use it in the normal

Test operation:

Use this switch in the test operation when the room

operation.

operation starts with the air flow speed setting "Hi".

Continue to press the test operation switch for more
than 5 seconds. After you hear the "Pi" sound twice,
release your finger from the switch, the cooling

Removal of the restriction of emergency or test operation:

Press once more the emergency operation switch, or manipulate through the remote
controller, a "Pi" sound causes the restriction of emergency or test operation to be
removed.
When the remote controller is manipulated for the removal, then the selected operation
by the remote controller.

Operation

13

Comfortable SLEEP

In COOL mode

sleep in selected mode.

Before going to bed at night, you can simply press
the SLEEP button and unit will bring you a sound

One hour after SLEEP mode starts, temp. will

become 1

o

C higher than temp. setting. After

running for another 1 hour, temp. rises by 1

o

C

further. Unit will run for 6 hours then stops

automatically. Temp. is higher than temp.

setting so that room temp. won't be too low

HQT[QWTUNGGR#UUJQYPKP(KIN

In HEAT mode

(As shown in Fig .2)

One hour after SLEEP mode starts, temp. will
become 2

o

C lower than temp. setting. After
running for another 1 hour, temp. decreases
by 2

o

C further. Unit will run for 3 hours at this

temp. then increases another 1

o

C and stops
automatically 3 hours later. Temp. is lower
than temp. setting so that room temp. won't
be too high for your sleep.

Power Failure Resume Function

with the indicator lighting up.

If the unit is started for the first time, the
compressor will not start running unless 3
minutes have elapsed. When the power
resumes after power failure, the unit will run
automatically, the power indicator lights up, and
3 minutes later the compressor starts running

Note:

In AUTO mode, unit will run in SLEEP

function according to operation mode.

In FAN mode, comfortable sleep is not

available.

SLEEP operation starts SLEEP operation stops

Approx. 6 hrs

1 hr

1 hr

Rises 1

o

C

Rises 1

o

C

Temp. setting Unit stop

Temp. setting Unit stop

decreases 2

o

C

decreases 2

o

C

Approx. 3 hrs

1 hr

1 hr

Rises 1

o

C

3 hrs

SLEEP mode starts SLEEP mode stops

Fig.1

Fig.2

ON/OFF TEMP

SET

TIMER

CLOCKSWING

SLEEP

LOCK RESET

FAN

MODE

Operation

14

AM

HEALTH

Different models have different appearance

Cleaning of unit casing

%NGCPKPIQHTGOQVGEQPVTQNNGT

Cleaning of air filter

Cut off power supply
before cleaning unit casing with soft cloth.
In case of heavy stain, clean it with neutral detergent.
squeeze water in the cloth, wipe off the detergent on unit
casing completely.

Don't use water to wash unit casing, please use dry cloth.
Don't use glass cleaner or cloth soaked with chemicals.

1.Open inlet grille by pulling it upward.

Air Filter

2.Remove air filter
Push up the filter's center tab
slightly until it is caesura of
the stopper. Remove it by
pulling down.

3.Clean the filter
Use a vacuum
cleaner to remove
dust,or wash the
filter with water.
After washing,
dry the filter
completely in the shade.

5.Close the inlet grille.

4.Attach the filter
Attach filter behind the stopper so that
the "Front" indication is facing to the front. Make sure
that it is completely behind the stopper, otherwise
problems might occur.

Maintenance

15

Better use of air conditioner

Proper room temperature. Cleaning of the air filter.

Effective use of the timer.

Closing of doors and windows
during operation

Never fail to observe the followings

Do not sprinkle water over

the unit.

Do not block the inlet or outlet.

Do not pull power plug. Do not use for other purposes.

Such as food preservation
plant cultivation or animal
breeding.

Avoid time-wasteful
operation

Curtains or blinds

for windows

Proper

temperature

Once every

two weeks

Maintenance

16