Haier HRF-568TGG Instruction Manual

Do not keep or use gas or other flammable goods nearby the refrigerator, so as to avoid fire hazard.
Do not spray or wash the refrigerator with water, or put it in humid or easily splashed places, so as not to affect electric insulation performance of the refrigerator.
Do not put bottled beverage into the freezer, so as to prevent cracking.
Strictly prohibit dismantling or transforming the refrigerator without authorization, or damage cooling pipes. Refrigerator repairmen must be done by professionals.
After the refrigerator starts operation, do not use your hand to touch the cold surface of freezer, especially when the hand is wet. Otherwise, the hand skin may stick to the cold surface.
Flammable, explosive and other dangerous goods, as well as highly corrosive acid, alkali and other chemicals are strictly prohibited in the refrigerator.
220V
50Hz
Refrigerators of this series use AC 220V/ 50Hz power. A large voltage fluctuation range (over the range of 187-242V) may cause malfunction or even damage to the refrigerator. Under such circumstance, it is necessary to add automatic regulator over 750W to facilitate the usage.
Do not damage the power cord
● Do not put the refrigerator onto the power
cord nor have person to step on it.
● Be careful not to roll on or damage the
power cord when moving the refrigerator from the wall.
A separate dedicated plug socket must be used for reliable grounding. Power cord of this series has a three-wire power cord plug (grounding), able to match the standard three-wire socket (grounding). Under any circumstance, do not cut or remove the third prong power (grounding).
Do not hang on the refrigerator door for playing, so as to avoid the door tilting or personnel injury caused by toppled refrigerator.
If there is leakage of gas and other flammable gases,
● Close the valve of leaked gas,
● Open the door and window,
● Do not plug in or off the power
plug of refrigerator and other electrical household appliances.
When put into disuse, please take off the
refrigerator door and the door seal, so as
to avoid accident happening to kids who
come inside to play.
Do not pull the power cord Do not plug off the power by pulling power cord and make sure to hold the plug and plug off the power directly.
Do not put unstable items (heavy items or water containers) on the refrigerator, so as to avoid injure people if dropping or leakage caused by overflow.
Please plug off the power when cleaning, repairing and changing damaged lights, so as to avoid electroshock.
The product is household refrigerator, only suitable for storing foods, but not for other purposes, such as storing blood, drugs or biologics.
For safety purpose, do not put power plug, voltage regulator or microwave oven on to the refrigerator, or use other electrical appliances inside the refrigerator to avoid electromagnet interference and other accidents.
Stop using when the power cord is damaged or the plug is worn. You must change the power cord in repair places designated by the manufacturer.
Technical data
2
Safety Precautions
3
8
Product features
Refrigerators of this series meet the national standards: GB/T8059.2 Furniture Refrigeration Appliances and Refrigerator Freezer
DEO deodorization module can remove odor in the refrigerating chamber and work together with the fan module to have faster disinfection and deodorization.
DEO deodorization module
Under the state of artificial intelligence, refrigerators of this series can automatically adjust temperature stalls based on temperature change without manual adjustments, so as to reach the best cooling effect.
Artificial intelligence and automatic temperature control
Dear Haier customers, Thank you for using Haier refrigerators. For your better understanding the instruction manual and using the product, here are detailed explanations about signs and symbols in the instruction manual:
Contents with this sign must be prohibited, otherwise it is possible to damage the product or endanger personal safety of users.
Contents with this sign must be followed strictly in operation because they are related with safe use of the product and personal safety of users, otherwise it is possible to damage the product or endanger personal safety of users.
Contents with this sign are those to which users must pay attention, otherwise damage to the product caused by improper operation may lead to other lose.
Attention symbol
Notice sign
Prohibition sign
1
(The figure shows model HRF-568TGG )
(The figure shows model HRF-568TGG
(Appearance, color and pattern of the refrigerator is
subject to actual product.)
HRF-568TGG
Model:
Contact Information
Haier Pakistan (Pvt) Ltd
Head Office Address:
8th Floor, Mega Tower,
Main Boulevard Gulberg II, Lahore
Contact No: (042) 1111 42437 (Haier)
Website: www.haier.com/pk
E-mail: info@haier.com.pk
Dear Haier customers, Thank you for choosing and using Haier products. We hereby promise: To provide “1+5” set of value-added services when you need installation and maintenance of Haier products: “1”: delivery and installation can be done in once; “5”: five sets of composite services: [A] To give electrical safety testing before services and to give proper explanation
[B] To give explanation about product usage, maintenance and to guide customers to properly use the product,
so as to lower energy consumption and to extend the service life of the product [C] To recommend household appliances and related services based on customer needs and if customers have new purchasing needs, to provide a series of services to design, deliver, install and repair. Haier gives you friendly reminder for providing sincere and caring services: Under Haier’s installation service, for individualized installation environment and special needs, extra material fees for installing or other special items are charged according to Manual of Service Charges Standard If the service engineers do not follow the standard or give proper services, please complain through Haier’s customer service hotline (042) 1111 42437 (Haier) or Haier online self-service zone. The service is free if your case is verified. Haier is waiting for you participation. If you need us, welcome to enjoy Haier self-service zone on http://www.haier.com/pk/servicesupport and to have on-line installation and maintenance services.
Inspector:
Certificate of Quality
Your Life Wisdom My Intelligent Life
Instruction manual of warranty card for Haier household refrigerators
Thank you for choosing Haier refrigerators. According to China’s Consumer Protection Law and regulations set in Provisions on the Liability for the Repair,
Replacement and Return of Some Commodities issued by China State Bureau of Technical Supervision and Bureau of Finance, we promise to provide the
following services based on electronic warranty card or invoice (Scan QR code on the front cover, choose electronic warranty card to download and install, and input invoice number to register the product. Simple procedures for warranty go with only one click to manage household appliances and convenient steps to install and maintain them:
1. The overall unit is free to repair for one year.
2. Key components (including compressor, evaporator, condenser, solenoid valve, control board, cabinet, door, thermostat, filter, capillary, fan motor, defrost heating wire, icemaker assembly, and timer) are free to repair for three years.
3. The following cases are not included in services free of charge but for charged repairmen and lifelong services: [A] Unable to provide warranty certificate or invoice;
[B] With invoice altered;
[C] Damage caused by unexpected factors or improper use; [D] Damage caused by repairmen without permission from the Company; [E] Exceeding the validity date of warranty to repair, replace and return, but capable for further use after repair.
4. The effective date of warranty to repair, replace and return the product starts from the invoicing date, with such dates deducted that are to repair and to wait for components. Within the warranty dates to repair, replace and return the product, consumers can have product repairmen, replacement or return with invoice and the certificate.
5. Consumers may choose to return, replace or repair the product if performance fault occurs within 7 days after the sale.
6. Consumers may choose to replace or repair the product if performance fault occurs within 15 days after the sale.
7. “Performance fault” refers to the fact that the product is unable meet health and safety requirements and have unreasonable risk to endanger the safety of personnel and properties.
The fan module can accelerate circulation of cold air, so as to even the temperature environment in the refrigerating chamber and make it conducive for storage.
Fan module
Packing list
Explanation of technical data:
(1) According to national standards, using temperature of the refrigerator should be between 10 to 38 ºC when climate type is SN.N.ST. Refrigerator volume is tested according to national standards when freezer drawer is taken away. (2) Rated power consumption marked in technical data gets its measured value based on national standards and under the circumstance of 25 ºC room temperature, 5 ºC temperature in refrigerating chamber, and -18 ºC temperature in freezer when the refrigerator door is closed for 24 hours. It is normal that actual power consumption is higher than the marked value when more foods are put into the refrigerator, room temperature is higher and the door is opened more frequently. (3) “Noise (acoustic power level)” marked in technical data gets its tested value in semi-anechoic chamber defined by national standards where the refrigerator is kept empty on the resilient rubber cushion of 5-6mm thick and operating stably (with power-on and power-off excluded) for at least 30 minutes. To test the noise one-meter away from the four sides of the refrigerator, arithmetic average of the noise tested in those four points is defined as the noise of the refrigerator. In real use, it is normal to have difference between actual noise and marked value because it may be affected by loaded foods, surrounding noises, opening and closing door, as well as power-on and power-off of compressor.
Please check goods inside the box according to the packing list and inquire with the stores if difference happens.
Fruit and vegetable boxes
Fan module
Vertical beam
Light in refrigerating chamber
DEO deodorization module Shelve
Vial seat
Vial seat
Large bottle holder
Freezer up-drawer
Freezer tray
Freezer down-drawer
Name of each component
Content Model
Climate type
Star signs
Electric shock protectio n class
Total effective volume (L)
Effective volue in freezer (L)
Rated voltage (V-)
Rated frequency (Hz)
Rated input current (A)
Freezing capacity (kg/24h)
Refrigerant
Weight
Flexible power connecti ons
Dimension D×L×H (mm)
HRF-568TGG
SN.N.ST I 476 157 220 50 1.8 10
R600a 88g 100Y666×833×1804
Name Number
M
odel
Instruction m
anual and
w
arranty
card
Shelves
Fruit and vegetable box
Freezing tray
Freezing up-drawer
Freezing down ­drawer
Big bottle holder
S
mall
b
ottle
h
older
Egg box
P
in
h
ole
Frost shavin
g
plate
I
ce
b
ox
HRF-568TGG 1 3 2 2 222 4 2 1 1 1
Lead (Pb)
Mercury
(Hg)
Cadmium
(Cd)
Hexavalent chromium
(Cr (VI))
Polybrominated diphenyl (PBB)
polybrominated
diphenyl
ethers (PBDE)
Cabinet and its components
○ ○ ○
Door and its components
○ ○ ○
Thermal insulation material
○ ○ ○
Compressor X
○ ○ ○
Computer board X
○ ○ ○
Cooling pipes
○ ○ ○
Refrigerant
○ ○ ○
Controllers and
electrical components
○ ○ ○
Power lines and cables
○ ○ ○
Packaging and
printing components
○ ○ ○
Component name
Hazardous substance
Hazardous substance and content table
Components in the table are the summary of parts on products of various models. That whether the product contains the component is subject to actual product configuration. Those not listed in the table, except part of POP advertising poster of customized products, other components and the homogeneous materials contained in the product do not have hazardous substances. All components and their homogeneo
us materials containing hazardous substances in the table are all complying with strict requirements of EU RoHS restrictions on the use of hazardous substances. Please take easy to use the product. Tips: To protect the environment, after the product or its components are scrapped, customers shoulder the responsibilities to separate them from household garbage and to send them to qualified recycling sites,
which will have classification, dismantling and recycling according to national regulations. As for detailed information about recycling the product, please consult local government and waste disposal agencies.
The table is compiled according to SJ/T11364regulations. means that the content of the noxious substance in all homogeneous materials of the component is lower than GB/T26572 required limit. X m
eans the content of the noxious substance in one homogeneous material of the component is over
GT/T26572 required limit.
Ice maker
1
• Please read the instructions carefully before use.
• The Company reserves the right to interpret the
instructions.
• Appearance is subject to actual product.
• Please keep the instruction manual together with the
invoice after reading.
• Product transformation or software upgrade may
happen without prior notice.
• The product is suitable formarketing and use only in
mainland China.
Scan QR codes to fully enjoy wisdom and charm of technology.
Refrigerator Instruction Manual
User Information
As for products exceeding the warranty period, Haier’s service staff can provide paid on-site service and the charges (for service exceeding the warranty period) include costs of repair labor and components. All the fees are charged based on Haier standardized charges shown by repairmen personnel who have to issue the invoice; otherwise customer may refuse to pay. Please keep the barcode on the product carefully because repairmen personnel need to scan the barcode as the credentials for on-site service, so as to establish accurate maintenance files.
Food residue inside the refrigerator may cause a bad smell, therefore it is necessary to clean the refrigerator on a regular basis.
Display panel
Instruction of the Display Panel
Instruction of Buttons
B
The button for Fuzzy adjustment: set or exist the state of intelligence (press to be effective).
C
The button for Super-Cool adjustment: set or exist the state of fast refrigerating (press to be effective).
D
The button for Super-Cool adjustment: set or exist the state of fast cooling (press to be effective).
A
The button for grade adjustment: set the grade of Fridge temperature (press to be effective).
e
d
b
c
Display icon of temperature: set A and temperature stalls change according to the preset rules.
Display icon of Fuzzy: set B and the display icon shows on or off.
Display icon of Super-Cool: set C and the display icon shows on or off.
Display icon of Super-Freeze: set D and the display icon shows on or off.
Display icon of block: set E and the display icon shows on or off.
a
E
The button of block/unblock: set or exist the state of block/unblock (press to be effective).
Over 10 cm away from the top
Over 10 cm away from t
he rear
Over 10 cm
away from
the left
Over 10 cm away from the right
5
6
Functions
Food Storage Guide
Product maintenance
4
Preparation for Use
7
Clean the refrigerator
After cleaning, the refrigerator must be kept still over 30 minutes without power, so as to ensure its normal operation.
Keep still over 30 minutes
Tear off the overlay film
Please tear off the transparent overlay film on the side plate if any, so as not to affect proper cooling and power consumption of the refrigerator.
Power on
After power-on, the refrigerator comes to the state of artificial intelligence automatically and the AL icon displays.
Remove all packaging components
Packing base and adhesive tape for fixing accessories also need to be removed.
Precautions for setting the Refrigerator
Transport
● Unplug the power cord and turn off the power.
Take away all foods from the refrigerator.
● Use adhesive tape to fasten such moving parts as shelves and food
container in the refrigerating chamber and drawers in the freezer.
● Close the door and fasten with adhesive tape, so as not to be opened
when moving.
● When moving, the maximum inclination angle should not be over than 45
degrees (the angle between the refrigerator and the vertical direction), so as not to cause failure in cooling system and to affect normal use.
● Cover the bottom corner beforehand to avoid scratching the
floor and prohibit forced lateral movement.
● Prohibit grabbing the refrigerator door, the roof and all kinds of pipes when moving.
The refrigerator must not be laid down at any time.
Place the refrigerator away from heat source and direct sunlight, so as not affect its performance.
Place the refrigerator with sound ventilation and keep it over 10 cm away from the surroundings.
Do not place the refrigerator in humid and easily-splashing environment and clean the splashing water and dirt timely, so as to prevent rust and not to affect the electrical insulation properties.
Do not place the refrigerator in over cold environment (less than 5 ºC) or use it outside or in the rain.
To raise To lower
Where to place the refrigerator
Cleaning
Use dry cloth to wipe water drops on the surface of the refrigerator.
There is no problem, even though in summer, to keep foods proper in the refrigerator after power-off within several hours.
After power-off, do not put more foods into the refrigerator and try to keep
the door closed.
It is necessary to make more ice cubes in watertight containers and put
upside the refrigerating, if you know the power-off beforehand.
If the refrigerator will be stopped using for a long time, it is necessary to plug off the socket, cut off the power and clean it according to the above-mentioned methods. You should keep the refrigerator door open when stop using, so as to avoid bad smell caused by small amount of food residue.
Stop using
Do not stop using the refrigerator under normal circumstances, so as to avoid shorten its service life.
Deactivation
Temperature rise within the freezer caused by power-off or other malfunction will shorten the storage life and lower the edible quality of foods inside.
Do not use water spray to wash the refrigerator, so as not affect Electrical insulation performance. Use dry cloth to wipe such electrical components as switch and light.
After appliances are scrapped, it is better to dispose properly or send to professionals, but not to discard carelessly, so as to avoid damaging environment or causing other risks.
The refrigerator uses side plates of the cabinet and the separator between the refrigerating chamber and the freezer to distribute heat, so it is normal to have higher temperature in those places.
● Under initial use, it is normal to have higher temperature
on the cabinet because of long time operation.
Q&A
Fridge not working
● Whether the power is connected or not (plug,
plug socket and power source fuse).
● Whether the power supply voltage is too low.
Fridge temperature not low enough
● Whether the temperature is set higher.
● Whether the door is not closed tightly, or the door
is opened frequently or for a long time.
● Whether the refrigerator is placed under direct
sunlight or too close to such heating sources as stove and heating system.
● Whether something blocks side plate or back
steel plate to cause poor ventilation or those plates are too dirty.
Fridge making big noise
● Whether the floor is flat and the refrigerator is set stably.
● Whether some part of the refrigerator touches external
objects or walls.
Fridge making noise
Invalid button operation
● Please check whether the power is cut off.
● Whether button operation is wrong. Please follow
instructions in “Functions – proper operation”.
Automatic change of temperature display
● It is normal that temperature of refrigerating chamber
changes.
● Change of temperature display under the state of
intelligence, it is normal that the refrigerator adjusts temperature automatically based on surrounding environment.
Severe frost on the posterior wall of refrigerating chamber
Temperature is not set properly. Please refer to “adjust temperature manually”.
The door is not closed tightly or withstood by foods.
The door is frequently opened.
● Excessive humidity, poor ventilation in hot days.
Long-term operation of the compressor
● Under initial use, it is normal to have higher temperature
because of long time operation.
● Large quantities of foods are put into the refrigerator for once to cool.
The door is frequently opened in hot days.
The door is not tightly closed.
Temperature is set too low. Please refer to “adjust
temperature manually”.
High cabinet temperature
● Refrigerant is flowing in the pipeline and it is normal
to have the sound of liquid flow.
● Under initial use, the refrigerator is not stable and it is
normal to have loud buzz.
● When the refrigerator is working, it is normal that
evaporator and pipes make the flap-flap noise because of thermal expansion and contraction.
● When the refrigerator starts or stops, it is normal that
relay elements click.
Light not working
● Whether the light is damaged.
● Whether the power is connected or not.
Do not use bristle brush, wire brush, abrasive (e.g. tooth paste and cleanser), organic solvents (e.g. gasoline, thinner, acetone and alcohol), hot water, acids or alkalis to clean the refrigerator.
The refrigerator must be kept on flat and hard floor, or on smooth, hard, and non-flammable pads if needed, and the packaging foam pads are prohibited to underlay the refrigerator. If unstable, apply the adjustable foot on the front of the refrigerator: clockwise rotation of the adjustable foot may raise the refrigerator while counterclockwise rotation of the adjustable foot may lower the refrigerator.
Refrigerating chamber
The refrigerating chamber is to store fruits, vegetables and non-staple foods, and to store eggs, beverages, condiments, canned food, and bottled food for short time.
Fast freezing
Before putting more fresh foods into the freezer,you can use the function of fast freezing (please refer to related information in this instruction). It is not necessary to set fast freezing function if foods of less than 1kg or frozen foods are put into the freezer.
● Pour water into the box up to three-quarters of its
volume and the put the box into the freezer.
● When removing the ice box, do not use knife or
other metal instrument, and use slighter exertion to remove it.
After getting the ice box, keep it in warm water for a while and twist the ice box with your hand to get the ice cubes.
Ice cube making
Freezer
The freezer has very low temperature and is able to keep foods fresh for a long time. Therefore, it is better to keep foods needing to store for a long time in the freezer, but the storage time indicated on the packaging should be complied.
(The figure shows model
HRF-568TGG
)
● Please plug off the socket before cleaning for safety purpose.
● Clean the refrigerator with wet soft towel or sponge (with neutral detergent
added in water).
It is necessary to wipe out the edible oil or seasoning on the liner in a timely
manner.
Frequently clean the dirt on the back and side plates of the refrigerator, so
as to improve the heat dissipation effect.
Door sealing strip is easy to be dirty and try to keep it clean.
Precautions for frozen foods
Drawers in the freezer can be moved out so as to have bigger storing space.
• Hot food must be cooled to room temperature before putting into the freezer.
• It is better to pack the frozen foods and keep the package dry, so as not
freeze together. The packaging materials should be tasteless, airtight, watertight, non-toxic, and non-polluting, so as to avoid taint of odor and deterioration.
• Foods should be stored according to various storage durations, and date,
duration and food name should be marked on the package, so as to avoid expiration.
• It is better to divide foods into appropriate smaller share, which are more
easily to frozen and to ensure the food quality when thawing and cooking. It is better to have less than 2.5 kg of each share.
• In principle, just take the needed shares of foods to thaw. Already thawed foods are better not to be frozen again, and they can be put into freezer again only after processed into finished dishes, otherwise the food quality will be affected.
• Do not put many fresh foods into the freezer for one time and it is better not
to exceed the freezing capacity of the refrigerator (refer to “Technical data”).
Product maintenance
● Manual defrost is needed in the freezer. After using for a while, a layer of frost may form on the interior wall (normal phenomenon). Over-thick frost will increase power consumption, so it is necessary to defrost with plastic scraper when the frost is thick.
● When defrosting, please first plug off the socket, cut off the power, take off foods and put in a cool plate, then extract the freezer door and drawers. After defrosting the freezer wall and evaporator plate, use towel to wipe water drops on the inside of the freezer, especially those near the slide and then put all parts back.
Defrosting is automatic in the refrigerating chamber. Frost on the back wall melts, water flows out through the outlet into the evaporation pan on the back, then heat from compressor operation makes defrost water evaporate automatically. Frost and water drops on the back of refrigerating chamber are normal phenomenon in cooling and automatic defrosting process.
Defrosting in freezer
Defrosting
Defrosting in refrigerating chamber
Water outlet
Pin hole
Please keep the water outlet up fruit and vegetable box unblocked, so that defrost water can flow out freely. Please use the attached pin hole to dredge if the water outlet is blocked.
Do not defrost by mechanical tools or other means (except on recommended models), so as to avoid damage the refrigerator.
Disassembling of bottle holder
● Hold both sides of the bottle holder and
lift it up according to direction .
● Pull out according to direction ②.
Disassembling of shelves in refrigerating chamber
● Hold the front and rear racks of the
shelve with two hands and hold up according to direction .
● Pull out horizontally according to
direction .
Precautions for refrigerating foods
• Hot food must be cooled to room temperature before putting into the
refrigerating chamber.
To keep sound hygienic environment inside the refrigerator, it is suggested to clean the food and wipe water drops before storing in the refrigerator.
• Foods of different types should be stored separately. Foods for daily use should be put in front of the shelves, so as to avoid unnecessarily opening the door for long time or forgetting to exceed the shelve-life of foods.
• Separately stored foods should be kept away with space for cool air
circulation, so as to have best refrigerating results.
• Foods stored in the refrigerator, especially those made with cooking oil, should avoid direct contact with the liner, so as to avoid corrosion of the liner. Clean the liner timely if cooking oil stains happen.
• Reduce the loss of cold air outflow to save power through cutting the number
of opening and closing refrigerator door, and avoiding opening the door with large angel.
There is temperature sensing device under the right side of the refrigerating chamber, so please keep the device not fully blocked by foods, otherwise the refrigeration system may not operate properly because the refrigerator cannot test correct temperature.
Fridge
Fuzzy
Super-Cool
Super-Freeze
Power on for the first time After the fridge is powered on for the first time, the display panel is lighted on with the fuzzy function as default settings. Based on te mperature requirements, the display grade shows one of grade 5, 6, and 7 automatically.
Display
The display panel is off 30 seconds later if the fridge is closed without operation.
Power cut memory The product has the function of power cut memory. The instantaneous operat ing state of power outage is locked and the fridge will re turn to normal operation based on the state (with functions of super-cool and super-freeze not memorized) set before the power outrage.
Light and its change
Light parameter: 12V DC, 2W
LED light is used here to ensure low energy consumption and long service life. Please contact sales staff to have on-site service if any problem happens.
Under the state of
super-
cool and
super-freeze
, the temperature of refrigerating chamber cannot be adjusted. If adjust temperature of refrigerating chamber under this state, the display icon corb sparks to remind that the operation is unacceptable. Under the state of
super-
cool and
super-freeze
, if set the intelligence function, the display icon cord is off accordingly and the function comes to intelligence automatically.
Adjustment button for refrigerating
Under the functions of unblock, unintelligence, super-cool,sup er-freeze press adjustment button A and the fridge
comes
to set the temperature of refrigerating chamber. The you press adjustment button A for once, the temperature will add 1 while the temperature of refrigerating chamber is rotating among 02-03-04-05-06-07-08-02. After the grade is set, the newly set grade is displayed.
Under the state of fuzzy, the temperature of refrigerating chamber cannot be adjusted. If adjust temperature of refrigerating chamber under fuzzy function, the display icon of fuzzy b sparks to remind that the operation is unacceptable. Under the state of fuzzy, if set functions of super-cool or super-freeze the display icon cord is lighted on and fuzzy display icon b is off, this fuzzy function quits automatically and comes into preset functions accordingly.
Fuzzy function setting
Fuzzy function can ensure normal operation of the
fridge
when
surrounding environment fluctuates among larger range. The fridge can adjust the temperature of refrigerating chamber automatically based on surrounding temperature. Under the state of unblock, press the fuzzy button to light on the display icon and the fuzzy function is on. Then press the button again to light off the icon with the fuzzy function being off.
Super-Freeze function setting
Under the state of unblock, press super-freeze button D, the button is lighted on and the freezer comes into the state of super-freeze. Press button D again, the button is off and the freezer quits the state of super-freeze. After setting super-freeze, the refrigerating chamber shows grade 2, which proves that the freezer is freezing continuously. The super-freeze function quits automatically 24 hours later.
Alarm when door opens
The buzzer will alarm if the door of refrigerating chamber is not closed tightly or opens over one minute. The buzzer will stop alarming 10 minutes later or the door kept closed.
Communication failure alert
If the display panel and the control board can not be communicated for over two minutes, temperature display area on the display panel will alternate to show E/0 to remind the communication failure.
Super-Cool function setting
Under the state of unblock, press super-cool button C, the button is lighted on and the refrigerating chamber comes into the state of super-cool . Press button C again, the button is off and the refrigerating chamber quits the state of super-cool. After setting super-cool , the refrigerating chamber shows grade 2, which proves that the refrigerating chamber is cooling continuously. The super-cool function quits automatically 5 hours later and the fridge operates under the grade before super­cool function starts.
Disassembling and cleaning of fruit and vegetable box in refrigerating chamber
● Pull the fruit and vegetable box out
horizontally.
● Wipe the fruit and vegetable box with
wet soft towel or sponge (with neutral detergent added in water) and Install through reverse direction after cleaning.
Disassembling and cleaning of drawer and tray in the freezer
● Open the drawer and tray to the
maximum angle or pull upward to remove them.
● Wipe the drawer and tray with wet soft
towel or sponge (with neutral detergent added in water) and Install through reverse direction after cleaning.
Disassembling of refrigerating chamber door
Please contact sales personnel if needed.
Refrigerator must be cleaned before use.
45 degrees
LOCK
hold 3 sec.
Loading...