HRF-380H/HRF-340H
Primary features
① Efficient ice making
A semi-automatic icemaker is installed in the freezer
compartment and ice cubes can be made efficiently.
②Electronic control system .
Electronic control system and double cooling system.
③Sliding food shelves for easy access .
Inside freezer and refrigerator compartments install
sliding food shelves for convenience of food loading
and unloading. Shelves can be removed if door is opened
as far as at 90° .
④ Unique external layout
Unique designs of streamline and curve refrigerator
doors with I shaped handle.
⑤Fuzzy mode .
The appliance adjusts cooling temperature
automatically according to ambient temperature
⑥Vitamin preservation technology for food storage .
⑦ Separate control for refrigerating and freezing
storage
The refrigerating and freezing compartments are
controlled
separately to optimize cooling efficiency and
economic
operation.
Diagram of parts
(1) Ice maker
(2) Ice box
(3) Freezer shelf
(4) Cooling storage
(5) Defrost water outlet
(6) Vc Fresh
(7) Light and lampshade
(8) Refrigerator shelf door
The appliance must be positioned so that the plug is accessible.
If the supply cord is damaged,it must be replaced by the manufacturer,
its service agent or similarly qualified persons in order to avoid to a
hazard.
Warning Keep ventilation openings,in the appliance enclosure or in the
built-in structure,clear of obstruction.
Warning Do not use mechanical devices or other means to accelerate the
defrosting process,other than those recommended by the
manufacturer.
Warning Do not damage the refrigerant circuit.
Warning Do not use electrical appliance inside the food storage
compartments of the appliance,unless they are the type
recommended by the manufacturer.
By the manufaturer.
(9) Refigerator shelf
(10) Bottle block
(11) Humidity control valve
(12) Crisper
(13) Adjustable foot
(14) Freezer bottle holder
(15) Refrigerator bottle holder
(16) Electronic control screen
Safety precautions
This refrigerator requires a
220V/50Hz supply
Failure in operation and damage to
the control panel, thermostat or
the compressor will occur if
voltage is outside the range 187-
242V unless a regulator with a
capacity of over 750W or higher is
installed.
Care for external cable
*Hold the plug, not the electric
cable, when unplugging the
refrigerator.
*Ensure that the electric cable is
not trapped by the refrigerator. Do
not step on the cable.
*Avoid damage to the electric cable
when moving the refrigerator.
A separate earthed socket is
required.
The refrigerator is supplied with a
standard three-pin plug, of which
the one for grounding should never
be removed. Plug of installed
refrigerator shall be always
accessible.
Damaged electric cable
When the electrical cable is
damaged or worn, turn off the
refrigerator and consult to an
authorized service agent for
replacement.
If inflammable gas leaks in the
vicinity of the refrigerator
*Turn off any leaking valve;
*Open the doors and windows;
*Do not, under any circumstances,
unplug electrical appliances in the
vicinity of the leak.
Unplug the refrigerator for the
following:
*Cleaning or maintenance;
*Replacement of lamp
Safety precautions
Never store inflammable, explosive
or corrosive materials in the
refrigerator.
Gas
Spray
Mousse
Do not install the refrigerator
near gasoline or other inflammable
articles.
Alkali
Acid
This refrigerator should be used
for food storage. It is not
recommended to place
microbiological or chemical
materials, which have special
requirement in temperature setting.
Vaccine
Bacterin
Chemical Agent
Don't place electrical plugs,
regulators or microwaves on top of
the refrigerator. Don't use
electric appliances (Except those
allowed by manufacturer) inside the
refrigerator.
Do not swing on or apply excessive
pressure to the refrigerator door.
Don't place heavy or unstable
articles or water containers on top
of the refrigerator.
Safety precautions
Do not touch inside surface of
freezer compartment in operation,
especially with wet hands as hands
may freeze onto the surface.
Disassembly, renovation or cooling
system maintenance of refrigerator
must be authorized.
Do not spray or splash the
refrigerator when cleaning the
refrigerator, nor place the
refrigerator in a damp area.
Never store bottled beer or
beverages in the freezer
compartment.
Unplug the refrigerator in the
event of a power interruption or
during cleaning. Allow at least 5
minutes lapse before restarting the
refrigerator.
Remove the refrigerator door and
door seal if the refrigerator is
discarded to prevent accidental
entrapment in the refrigerator.
Location
The appliance should be placed on a flat and solid surface. If the
refrigerator is placed on a plinth, flat, strong and fire-resistant
materials must be used. The front black foot of the refrigerator can
be adjusted clockwise or anti-clockwise to lift or lower the
refrigerator if it is placed on an uneven surface.
Adjustable Foot
Clockwise
Anti-clockwise
The refrigerator shall be placed
away from heat sources or direct
sunlight.
Never place the refrigerator near
to a water source. Clean and dry any
water splashes and stains with soft
cloth.
The refrigerator should be placed
in a well-ventilated area, and a
space of 10cm or more should be
allowed around the refrigerator.
>10cm>10cm
>10cm>10cm
>10cm>10cm
Never place the refrigerator in an
area with an ambient temperature
below zero. Never operate the
refrigerator outdoors or in rain.
Preparation
Unpacking
Remove all packing materials.
Check attached accessories and
materials.
Check if all accessories specified
in the
Packing List are available. Contact
the
local distributor if shortage is
found.
Ensure that the refrigerator is
properly located.
(See section Location )
Clean the refrigerator before
using.
(See section Cleaning )
Quality
Certificate
Operation
Manual
Warranty
Certificate
Time lapse before power supply
Connect the refrigerator to power
source at least 30 minutes after the
refrigerator is sited and cleaned.
Caution: After unpacking, write down the model and
manufacture number of the refrigerator on the Warranty
Certificate which will be required if technical services