Haier HL26R1, HL32XK1, HL32K1, HL32P1, HL32R1 User Manual

...

TFT-LCD TV

OWNER S MANUAL'

Please READ this manual carefully before operating your TV, and retain it for future reference.

MODEL :S

HL26R1 HL32R1 HL42XR1 HL26K1 HL32K1 HL32XK1 HL42XK1

HL32P1

Warning

The lightning flash with arrowhead symbol, within an

CAUTION

RISK ELECTRIC SHOCK DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO

RAIN OR MOISTURE.

CAUTION: TO PREVENT ELECTRIC SHOCK DO NOT USE THIS POLARIZED PLUG WITH AN

EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.

CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.

Important Safety Instructions

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.

8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11) Only use attachments/accessories specified by the manufacturer.

12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ Apparatus combination to avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or when unused for long periods of time.

14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

15)The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.

16)The mains plug or appliance inlet is used as the disconnect device, remain it readily operable during the apparatus normal use.

Class I apparatus shall be connected to a mains socket outlet with a protective earthing connection.

2 TV LCD-TFT

Safety Instructions

FCC STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the

FCC Rule. These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, use and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications. However there is no

guarantee that interference will not occur in particular installation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by turning the equipment off and on, the user is encourage to

try to correct the interference by one or more of the following measures:

*Reorient or relocate the receiving antenna.

*Increase the separation between the equipment and receiver.

*Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

*Consult the dealer or an experienced radio/TV technician for help.

This device compiles with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may be not cause harmful interference.

(2) this device must accept any interference received, including interference that may cause undesired

operation.

FCC CAUTION:

To assure continued compliance and possible undesirable interference, the provided ferrite cores must be

used when connecting this LCD display to video equipment; and maintain at least 40cm spacing to other

peripheral device.

CANADIAN NOTICE:

This Class B digital apparatus compiles with Canadian ICES-003.

Energy Star compliant( ) By being Energy Star compliant you are assured that your Haier model is helping the environment by using less energy while saving you money. ENERGY STAR is a joint program of the U.S. Environmental Protection Agency and the U.S. Department of Energy promoting energy efficiency.

models - HL26R1, HL32R1, HL26K1, HL32K1, HL32XK1,HL32P1

Owner s Manual 3

Safety Instructions

SAVE THESE INSTRUCTIONS

Thank you for purchasing the Haier product. This easy-to-use manual will guide you in getting the best use of your product. Remember to record the model and serial number. They are on label in back of the unit.

Model number

serial number

Date of purchase

Staple your receipt to your manual.You will need it to obtain warranty service.

4 TV LCD-TFT

Contents

Introduction

War ni ng . . . . . . . . .. .. ......... . . . . . . . . . . . . . . . . . . . . .

Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Introduction

Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...........

Connection Options . . . . . . . . . . . . . . . . . . . . . .........

Remote control . ............ . . . . . . . . .......... . . .........

Installation

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . ........

Antenna Connection . . . . . . . . . . ..........................

Connecting a VCR. . . . . . . . . . . . . . . . . . . . . ...........

External A/V Source Setup . . . . .. . . . . ..................

Connecting a DVD player . . . . . ...... . . . . . . . . . . . . .

Connecting a DTV(digital TV) ..............................

Connecting digital audio output . . . . . . . . . . . . . . . . .

Connecting a computer. . . . . . . . . . . . . . . . . . . . . . . .

Monitor Out Setup. . . . . . . . . . . . . . . . . . . . .. .. .. .. .. .. .

HDMI and DVI input. . . . . . . . . . . . . . . . . . . . . . . . . . . .

Cable sample......................................................

Connecting Headphones . . . . . . . . . . . . . . . . . . . .....

Power source................ . . . . . . . . . . . . . . . . . . . . . .

Removing the table stand and installing a wall mount bracket

Operation

Switching On/Off the TV set . . . . . ... . . . . . . . . . . ....

Choose the Menu Language . . . . ..... ....................

Choose the input source......................................

Channel Menu

Channel Scan............... . . . . . . . . . . . . . . . . . . . . . . .

Channel Skip....... . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Channel Label....... . . . . . . . . . . . . . . . . . . . . . . . . . . .

Select the desired program. . . . . . . . . . . . . . . . . . . . .

Select the desired sound. . . . . . . . . . . . . . . . . . .. . . .

Mute. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Video Menu

How to select picture mode..................................

How to customize your own picture status .............

Set. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . .

...PC

2 3

6 7 8

9 9 10 11 11 12 12 13 14 14 15 16 16

18 18 18

19 19 19 20 20 20

21 21 22

Audio Menu

How to select audio mode....................................

How to customize your own audio status ...............

SAP Broadcasts Setup........................................

Function Menu

Menu Language...................................................

OSD Timeout.......................................................

OSD Transparency...............................................

Screen Mode.......................................................

Blue Screen.........................................................

DPMS.................................................................

Time zone setting.................................................

Date /Time setting................................................

Sleep Timer setting..............................................

DTV Caption Style................................................

Lock Menu

Parental Control rating and categories...................

Lock setup...........................................................

Other Functions

Brief Info. . . . . . . . . . . . . . . . . . . . . . . . . . . . . ............

Using the Guide. . . . . . . . . . . . . . . . . . . . . . . ............

Quick program view..............................................

CC (Closed Caption Display) . . . . . . . . . . . . . ... . .. .

USB Input............................................................

Universal Remote Control

Setting up your remote control ..............................

Remote Control Codes ........................................

Maintenance . . .... .. . . . . . . . . . . . . . . . . . . . . . . . . . .

Product Specification . . . . . . . . . . . . . . . . . . . . . . .

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Warranty ............................................................

23 23

24 24 24 24 25 25 25 25 26 26

27 28

30 30 31 31 32

34 36

42 43 44 45

Owner s Manual 5

Controls

L - AUDIO - R

VIDEO

This is a simplified representation of the TV front panel, side panel control buttons and side inputs.

TV Side panel controls and connections

Introduction

HL26R1/HL32R1/ HL42XR1

HL26K1/HL32K1/ HL32XK1/HL42XK1

VIDEO2 IN

HDMI4 INHDMI3 IN USB

MENU INPUT VOL+ VOL- CH+ CH- POWER MENU INPUT VOL+ VOL- CH+ CH- POWERMENU INPUT VOL+ VOL- CH+ CH- POWER

L - AUDIO - R

VIDEO

HL32P1

1.MENU: Menu display.

2.INPUT: Press to the input source mode.

watch. In the MENU screen, the INPUT button serves as the ENTER button.

3.VOL +/-: Press to adjust the volume. In the MENU screen, these buttons serve as left/right buttons.

4.CH +/- : Press to scan through channels. To scan quickly through channels, press and hold down either +/- . In the MENU screen, these buttons serve as up/down buttons.

5.POWER: Press to turn on and off the TV.

USB input: Connect a USB flash drive to view JPEG images or listen to MP3 songs.

7.Av2 AUDIO IN: Connect the audio L/R cables from the video signal source to these jacks.

8.AV2 VIDEO IN: Connects the composite video cable from an external signal source to this jack.

9.Headphone jack : Headphone audio output terminal.

10.HDMI IN: Connect a

11. Remote Sensor Receives signals from the remote control. Do not put anything near the sensor ,

Press to access the on-screen menu display

access Press repeatedly to change the source to the one you want to

HDMI device to receive digital audio and uncompressed digital video signals.

which may block the remote control signal.

6 TV LCD-TFT

Connection Options

L L

R R

VIDEO

S-VIDEO

VGA

VGA AUDIO

AUDIO AUDIO

DVI AUDIO

AUDIO

COMPONENT IN

VIDEO IN

AV O UT

VGA IN

HDMI IN

ANT IN

OPTICAL OUT

Back panel connections

Introduction

ANT IN

OPTICAL OUT

COMPONENT IN

VIDEO IN

VIDEO

1. Digital Audio Output:

DVI AUDIO

VGA

AUDIO

VGA AUDIO

AUDIO

S-VIDEO

Connect various types of digital audio equipment.

VGA IN

AV O UT

NOTE: In standby mode, these ports will not work.

2. DVI Audio In:

When using a DVI to HDMI adapter, connect the audio signal to these jacks.

3. Antenna Input: Connect cable or antenna signals to the TV, either directly or through your cable box.

4. HDMI In:

Connect a HDMI device to receive digital audio and uncompressed digital video.

5.VGA Audio In: Connect the audio L/R cables from a computer to this jack.

6.VGA Video In: Connect a video cable from a computer to this jack.

7. VIDEO In: Connects the video signal from a video device.

Component Video

8. In: Connect a component video device to these jacks.

9. AUDIO In: Connect the audio L/R cables from the video signal source to these jacks.

10. S-VIDEO In: Connect the S-Video cable from an external signal source to this jacks.

11. COMPONENT AUDIO In: Connect the audio L/R cables from the component video signal source to these jacks.

12. AUDIO In: Connect the audio L/R cables from the S-Video signal source to these jacks.

13. AUDIO Out: Connect the audio L/R cables to

your audio equipment.

Owner s Manual 7

Universal Remote control

The remote control cannot be operated unless the batteries are properly loaded. When using the remote control, aim it at the remote sensor on the TV.

Introduction

Function introduction

3 4

13 14

STB

CABLE VCR AUD

PICTURE AUDIO PC HDMI

INPUT

MUTE

VOL CH

ENTER

SLEEP DISPLAY

PLAY/PAUSE

REV

REPEAT

MTS/SAP

FREEZE

GUIDE

CCD ARC

DVD

RECALL

EXIT

STOPUSB REC

PREV NEXT

CH.LIST

FAVORITE

1.POWER Press to turn on and off the TV.

2.TV DVD SETBOX CABLE VCR

AUD

To select one of the system modes in which the remote control

can be used.

3.PICTURE

Press repeatedly to cycle through the available picture modes.

4. AUDIO

Press to cycle through different sound settings.

5.INPUT

Show the input source.

6.MUTE

Switches the sound on or off.

video

7.VOLUME UP/DOWN

Press to adjust the volume.

8.MENU

Press to open the on-screen menu.

9.THUMBSTICK (Up/Down/Left/Right)

Allows you to navigate the on-screen menus and adjust

the system settings to your preference.

10.SLEEP button

Press to display the sleep timer option.

11.

USB: Press to switch input source to USB in.

12. MTS/SAP

Selects MTS sound: Mono, Stereo, and SAP in Analog

mode. Change the audio language in DTV mode.

13.GUIDE

Press to display the guide when you are watching analog or

digital channels.

14.CCD(closed caption)

Select a closed caption.

HDMI:Press to select a device connected to the HDMI input

15.

16.PC:Press to select the computer connected to the VGA input

17.Number buttons

Press to change a channel.

18. button

Press to select digital channels. For example, to enter

“54-3”, press “54”, “ ” and “3”.

19.RECALL

Press to jump back and forth between two channels.

20.CHANNEL UP/DOWN

Press to scan through channels. T

o scan quickly between the

last two channels, press and hold down either +/- .

21.EXIT

Clears all on-screen displays and returns to TV viewing

25 26

27 28

from any menu.

22.

ENTER

Accesses the highlighted item in the on-screen menu

23.DISPLAY

Press to display the TV status information on the top of the TV

screen.

24. Functions

USB

Control the USB System.

/ Rewind / Fast / backward /Forward

Stop Play/Pause REC

REPEAT Repeat

25.FREEZE

Press once to display a frozen image of the current program,

but audio continues. Press again to return to the program.

26.CH.LIST

Open the channel list .

in TV

27.FAV.LIST

Press to open the favorite channel list .

in TV

28.ARC(Aspect Ratio Control)

Press to change the aspect ratio.

8 TV LCD-TFT

ANT IN

Installation

External Equipment Connections

Accessories

DVD

CABLE VCR AUD

STB

PICTURE AUDIO PC HDMI

INPUT

RECALL

MUTE

VOL CH

EXIT

ENTER

SLEEP DISPLAY

PLAY/PAUSE

STOPUSB REC

PREV NEXT

REV

CH.LIST

REPEAT

MTS/SAP

FREEZE

GUIDE

CCD ARC

FAVORITE

Remote control Owner`s manual Alkaline battery(AAA) 2

Antenna Connection

Over-the-air TV reception quality will depend on your antenna type, antenna location and antenna positioning.

TFT-LCD TV

OWNER S MANUAL'

Please READthis manual carefully before operatingyour TV, and retain it for future reference.

MODEL:S

HL37T

HL26K

HL52T

HL32K HL37K HL42K HL47K

VHF Antenna UHF Antenna

ANT IN

Multi-family Dwellings/Apartments (Connect to wall antenna socket) Wall Antenna Socket

Bronze Wire

RF Coaxial Wire (75 ohm)

Turn clockwise to tighten

Single-family Dwellings /Houses (Connect to wall jack for outdoor antenna) Outdoor Antenna

To improve the picture quality in a poor signal area,

please purchase a signal amplifier and install properly.

If the antenna needs to be split for two TV`s, install a 2-Way Signal Splitter in the connections. To install the antenna properly please contact a

professional in your area.

Bronze Wire

Be careful not to bend the bronze wire when connecting the antenna.

Owner s Manual 9

L L

R R

VIDEO

S-VIDEO

VGA

VGA AUDIO

AUDIO AUDIO

DVI AUDIO

AUDIO

COMPONENT IN

VIDEO IN

AV O UT

VGA IN

HDMI IN

ANT IN

OPTICAL OUT

External Equipment Connections

NOTE: All cables shown are not included with the TV.

Choose Your Connection

There are several ways to connect your television, depending on the components you want to connect and the quality of the signal you want to achieve. The following are examples of some different ways to connect your TV with different input sources.

Connecting a VCR

To avoid picture noise (interference), leave an adequate distance between the VCR and TV.

Installation

Connection Option 1

Set VCR output switch to channel 3 or 4 and then tune the TV to the same channel number.

Connection Option 2

1. Connect the audio and video cables from the VCR's output jacks to the TV input jacks, as shown in the figure. When connecting the TV to VCR, match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red). If you connect a S-VIDEO output from VCR to the S-VIDEO input, the picture quality is improved; compared to connecting a regular VCR to the Video input.

2. Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner`s manual.)

3. Select the input source with using the INPUT button on the remote control, and then press / button to select the source, press ENTER button to confirm.

OPTICAL OUT

COMPONENT IN

VIDEO IN

VIDEO

AUDIO

S-VIDEO

VGA AUDIO

AUDIO

DVI AUDIO

ANT IN

HDMI IN

AV OUT

10 TV LCD-TFT

L L

R R

VIDEO

S-VIDEO

VGA

VGA AUDIO

AUDIO

DVI AUDIO

AUDIO

COMPONENT IN

VIDEO IN

AV O UT

VGA IN

HDMI IN

ANT IN

OPTICAL OUT

L L

R R

VIDEO

S-VIDEO

VGA

VGA AUDIO

AUDIO

DVI AUDIO

AUDIO

COMPONENT IN

VIDEO IN

AV O UT

VGA IN

HDMI IN

ANT IN

OPTICAL OUT

External Equipment Connections

External A/V Source Setup

How to connect

Connect the audio and video cables from the external equipment's output jacks to the TV input jacks, as shown in the figure. When connecting the TV to external equipment, match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red).

How to use

1. Select the input source with using the INPUT button on the remote control.

2. Press / button to select the desired source.

3. Press button to confirm.

ENTER

4. Operate the corresponding external equipment.

OPTICAL OUT

COMPONENT IN

VIDEO IN

VIDEO

S-VIDEO

AUDIO

DVI AUDIO

Installation

VGA

AUDIO

Camcorder

ANT IN

HDMI IN

VGA IN

AV OUT

Connecting a DVD player

How to connect

1. Connect the DVD video outputs (COMPONENT) to the Y Pb Pr jacks on the TV and connect the DVD audio outputs to the YPbPr Audio IN jacks on the TV, as shown in the figure.

2. If your DVD only has an S-VIDEO output jack, connect this to the S-VIDEO input on the TV. as shown in the figure.

Note

If your DVD player does not have component video output, use S-Video.

How to use

1. Turn on the DVD player, insert a DVD.

2. Use INPUT button on the remote control to select component mode.

3. Press Play button on external equipment for program play.

4. Refer to the DVD player's manual for operating instructions.

Component Input ports

To get better picture quality, connect a DVD player to the component input ports as shown below.

Component ports on the TV

Y Pb Pr

OPTICAL OUT

COMPONENT IN

VIDEO IN

VIDEO

AUDIO

S-VIDEO

DVI AUDIO

Video Game Set

VGA

AUDIO

ANT IN

HDMI IN

AV OUT

Video output ports on DVD player

Y Pb Pr Y B-Y R-Y

Y Cb Cr Y P P

Owner s Manual 11

L L

R R

VIDEO

S-VIDEO

VGA

VGA AUDIO

AUDIO

DVI AUDIO

AUDIO

COMPONENT IN

VIDEO IN

AV O UT

VGA IN

HDMI IN

ANT IN

OPTICAL OUT

L L

R R

VIDEO

S-VIDEO

VGA

VGA AUDIO

AUDIO

DVI AUDIO

AUDIO

COMPONENT IN

VIDEO IN

AV O UT

VGA IN

HDMI IN

ANT IN

OPTICAL OUT

Installation

External Equipment Connections

Connecting a DTV(digital TV)

This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do receive Digital signals from a digital set-top box or other digital external device, refer to the figure as shown below. This TV supports HDCP (High-bandwidth Digital Contents Protection) protocol for Digital Contents (480p,720p,1080i).

How to connect

Use the TV`s COMPONENT , VGA or HDMI jack for video connections, depending on your set-top box connector. Then, make the corresponding audio connections.

How to use

1. Turn on the digital set-top box. (Refer to the owner`s manual for the digital set-top box.)

2. Use INPUT on the remote control to select COMPONENT , VGA or HDMI source.

Signal

480i

480p

720p

1080i

1080p

COMPONENT

Yes

HDMI

Yes

Connecting a digital audio output

Send the TV`s audio to external audio equipment (stereo system) via the Digital Audio Output (Optical) port.

How to connect

1. Connect one end of an optical cable to the TV Digital Audio(Optical) Output port.

2. Connect the other end of the optical cable to the digital audio (optical) input on the audio equipment. See the external audio equipment instruction manual for operation.

Note

When connecting with external audio equipments, such as amplifers or speakers, please turn the TV speakers off.

OPTICAL OUT

COMPONENT IN

VIDEO IN

VIDEO

AUDIO

S-VIDEO

Digital Set-top Box

OPTICAL OUT

COMPONENT IN

VIDEO IN

VIDEO

AUDIO

S-VIDEO

DVI AUDIO

VGA AUDIO

AUDIO

DVI AUDIO

VGA AUDIO

HDMI IN

AV O UT

HDMI

ANT IN

AUDIO

HDMI IN

VGA IN

AV OUT

Caution: Do not look into the optical output port. Looking at the laser beam may damage your vision.

12 TV LCD-TFT

L L

R R

VIDEO

S-VIDEO

VGA

VGA AUDIO

AUDIO AUDIO

DVI AUDIO

AUDIO

COMPONENT IN

VIDEO IN

AV O UT

VGA IN

HDMI IN

ANT IN

OPTICAL OUT

Installation

External Equipment Connections

Connecting a computer

How to connect

1. To get the best picture quality, adjust the VGA graphics card to 1024x768 .

2. Use the TV`s VGA or DVI (Digital Visual Interface)Audio IN port for audio connections, depending on your computer connector.

If the graphic card on the computer does not output analog and digital RGB simultaneously, connect only one of

either VGA IN or HDMI IN to display the VGA on the TV.

If the graphic card on the computer does output analog and digital RGB simultaneously, set the TV to either VGA or

HDMI ; (the other mode is set to Plug and Play automatically by the TV.)

3. Then, make the corresponding audio connection. If using a sound card, adjust the VGA sound as required.

How to use

1. Turn on the computer and the TV.

2. Use INPUT on the remote control to select VGA or HDMI source.

3. Check the image on your TV. There may be noise associated with the resolution, vertical pattern, contrast or brightness in VGA mode. If noise is present, change the VGA mode to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the menu until the picture is clear. If the refresh rate of the VGA graphic card can not be changed, change the VGA graphic card or consult the manufacturer of the VGA graphic card.

Note

1.Use a DVI cable.

2.Avoid keeping a fixed image on the TV's screen for a long period of time. The fixed image may become permanently imprinted on the screen.

3. The synchronization input form for Horizontal and Vertical frequencies is separate.

Resolution

Mode

VGA

SVGA

XGA

Resolution

640x480

800x600

1024x768

Frame frequency (Hz)

60Hz

75Hz

60Hz

75Hz

OPTICAL OUT

COMPONENT IN

VIDEO IN

VIDEO

AUDIO

S-VIDEO

AUDIO

DVI AUDIO

VGA AUDIO

ANT IN

HDMI IN

VGA IN

AV O UT

Owner s Manual 13

Installation

External Equipment Connections

HDMI and DVI input

When the source device(DVD player or Set Top Box) supports HDMI

How To Connect

1. Connect the source device to HDMI port of this TV with an HDMI cable(not supplied with this product).

2. No separated audio connection is necessary.

How To Use

If the source device supports Auto HDMI function, the output resolution of the source device will be automatically set to 1280x720p. If the source device does not support Auto HDMI, you need to set the output resolution appropriately. To get the best picture quality, adjust the output resolution of the source device to 1280x720p. Select HDMI input source in input source option of Select Main source menu.

When the source device(DVD player or Set Top Box) supports DVI

How To Connect

1. Connect the source device to HDMI port of this TV with a HDMI-to-DVI cable(not supplied with this product).

2. A separated audio connection is necessary.

3. If the source device has an analog audio output connector, connect the source device audio output to DVI Audio In port located on the left side of HDMI port.

How To Use

If the source device supports Auto DVI function, the output resolution of the source device will be automatically set to 1280x720p. If the source device does not support Auto DVI, you need to set the output resolution appropriately. To get the best picture quality, adjust the output resolution of the source device to 1280x720p. Press the INPUT button to select HDMI input source in input source option of Select Main source menu.

14 TV LCD-TFT

+ 32 hidden pages