Haier HL26P2a, HL26P2 User Manual
HL26P2
Contents
Safety and warnings...................................................................................... 2-4
Introduction................................................................................... ..............5
Installation.................................................................................................. 6-9
Remote Control............................................................................ ..............10
Operation.....................................................................................................11-14
Trouble Shooting.......................................................................................... 15
Warranty.......................................................................................... ............16
-1-
-2-
SAFETY AND WARNINGS
1.Read these safety instructions.
2.Keep these safety instructions.
3.Heed all warnings.
4.Follow all safety instructions.
5.Do not use thisapparatus near water.
6.Clean only with drycloth.
7.Do not block anyventilation openings. Install in
accordance with the manufacturersinstructions.
8.Do not install nearany heat sources such as radiators ,
stoves, or other apparatus(including
9.Protect the power cordfrom being walked on or
pinched particularly at poweroutlets, and the point
where they exit from the apparatus.
10.Only use attachments/accessories specifiedby the
manufacturer.
11.Unplug this apparatus during lightning storms or
when unused for longperiods of time.
12.Refer all servicing toqualified service personnel.
Servicing is required whenthe apparatus has been
damaged in any way, such as the power-supply cord
or plug is damaged,liquid has been spilled or objects
have fallen into theapparatus, the apparatus has been
exposed to rain or moisture, does not operate n
13.Apparatus must not beexposed to dripping or
splashing and no objects filled with liquids, such as
vases, should
amplifiers)that
produce heat.
ormally,
or has been dropped.
be placed on theapparatus.
IMPORTANT SAFETY INSTRUCTION
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK).NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
RISK OFELECTRIC SHOCK
DO NOTOPEN!
CAUTION
CAUTION
The symbol indicates that dangerous voltages
constituting a risk of electric shock are present
within this unit.
The symbol indicates that there are important
operating and maintenance instructions in the
literature accompanying this unit.
To prevent fire or shock hazard, do not expose this
appliance to rain or moisture.
WARNING:
-3-
High voltages are used in the operation of this television
receiver. Do not open the back cabinet.
Refer servicing to qualified service personnel.
SAFETY AND WARNINGS
To prevent fire or electrical shock hazard, do not expose
the television receiver to rain or moisture.
Do not drop or push objects into the television cabinet
slots or openings. Never spill any kind of liquid on the
television receiver.
Do not block the ventilation holes in the back cover.
Adequate ventilation is essential to prevent failure of
electrical components.
Do not place the power supply cord under the television
receiver.
Never stand on, lean on, or suddenly push the television or
its stand. You should pay special attention to children.
Serious injury may result if it falls.
Do not place your television on an unstable cart, stand,
shelf or table. Serious injury to an individual , and damage
to the television, may result if it falls.
When thetelevision receiver isnot used foran
extended periodof time, it is recommended to
disconnect theAC power cord fromtheAC outlet.
Avoid exposing the television receiver to direct sunlight
and other sources of heat. Do not place the television
receiver directly on other products which give off heat,
e.g. video cassette players and audio amplifiers. Do not
place naked flame sources, such as lighted candles on
the television.
Dim:515*320mm(）
If the television is to be built into a compartment or similar
enclosure, the minimum distances must be maintained. Heat
build-up can reduce the service life of your television, and
can also be dangerous.
-4-
Thank you very much for purchasing this TV. To enjoy
your product from the very beginning, read this manual
carefully and keep it handy for easy reference.
INSTALLATION
CAUTION
Locate the TV in the room where light does not strike
the screen .
Total darkness or a reflection on the picture screen can
cause eyestrain. Soft and indirect lighting is recommended
for comfortable viewing.
Allow enough space between the TV and the wall to
permit ventilation.
Avoid extremely warm locations to prevent possible
damage to the cabinet or premature component failure.
This TV can be connected to AC 100-240 Volts. 50/60 Hz.
Never connect to a DC supply or any other power supply.
Do not cover the ventilation openings when using the TV.
directly
Never tamper with any components inside the TV, or any
other adjustment controls not mentioned in this manual.
All LCD-TVs are high voltage instruments. When you
clean up dust or water drops on the LCD PANEL or
CABINET, the power cord should be pulled out from the
receptacle, then wipe the TV with a dry soft cloth. During
thunder and lighting, unplug the power cord and antenna
cord to prevent damage to your TV. All repairs to this TV
should only be performed by qualified TV service personnel.
Earthing connection--- The apparatus shall be connected
to MAINS socket outlet with a protective earthing connection
MAINS plug or appliance coupler of the apparatus is used
as disconnect device, it should remains readily operable。。
SAFETY AND WARNINGS
Warning: Change or modifications to this unit not expressly
by the part responsible for compliance could void the user 's
authority to operate the Equipment.
NOTE:
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or
television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected .
-Consult the dealer or an experienced radio TV technician
for help.
Shield cables must be used with this unit to ensure
compliance with the Class B FCC limits.
This symbol indicates that this productincorporates
double insulation between hazardous mains voltage
and user accessible parts. When servicing use only
identical replacement parts.
WARNING: To reduce the risk of fire or electric shock,
do not expose this apparatus to rain or cords.
-5-
INTRODUCTION
Main features
1366 x768 native resolution for HD performance
Integrated ATSC TV tuner for HDTV broadcast reception
High brightness provides a vivid and brilliant picture
Deeper blacks and brighter whites with high contrast
Wide Screen aspect ratio (16:9) for a complete home
theater experience
HDMI input for true digital connection
VGA port for connection to PC
Built-in stereo speaker system
Full-function Remote Control
■
■
■
■
■
■
■
■
■
Accessories
AC PowerCord.........................
1
Infrared RemoteControl...........
1
User s Manual ........................’
1
Battery(AAA).......................... 2
Accessories
Resolution:
Aspect Ratio:
TV System:
Video Signal System:
Receiving Channel:
Input Power Voltage:
Power consumption:
Main parameter
YCb(Pb)Cr(Pr) Input
Horizontal definition(TV line)
Viewing Picture Size(diagonal)
1366x768
16:9
ATSC Digital system and NTSC Analog system
130W
Audio Output Power(THD 7%):
2x3W
NTSC/PAL/SECAM
Cable :1-135/ Air: 2-69(ATV&DTV)
AC 100V-240V 50/60Hz
Analog RGB(VGA) Input x 1
Rear High-Definition Multimedia Interface(HDMI) Input x 2
Rear Audio Input x 2
Composite Video Input >=350
x1
YCb(Pb)Cr(Pr) >=400
Video Input >=400
26 inch
Rear Composte Video Input x 1
Loading...