HDE-2580EGB
Please read this booklet carefully before fixing and using and
save it for future reference.
OPERATION THEORY OF MICROWAVE OVEN
1. Microwave is a kind of high frequency electromagnetic wave, which is commonly distributed in the
nature. But the existing form of microwave is dispersed so that it cannot be collected together for heating
purpose. The key component of magnetron of microwave oven will transform the energy of electricity to
microwave and huge energy of microwave field is established under the closed cavity. So the molecule of
food is caused to vibrate at very high speed and the friction heat produced will cook the food in a fast
way.
2. There is 3 properties of microwave, that is
a) Absorbability: the microwave can cause the excess vibration of molecule of various food so as to obtain
the heating purpose. But the infiltration ability is largely depend on the size, thickness and properties of
the food.
b) Penetrability: microwave can penetrate through ceramics, glass, temperature-resistant plastics. It is
required
result. See the below utensils guide.
c) Reflectivity: microwave would be reflected by the metal wall of interior cavity so as to establish an
even magnetic field, thus can prevent the overheating of partial area.
to use the containers whose material have good microwave penetrability to achieve best heating
INSTALLATION OF MICROWAVE OVEN
1) The position of the oven shall be such that it is far from the TV, Radio or antenna as picture disturbance
or noise may occur.
2) The appliance must be positioned so that the plug is accessible.
3) This is a cabinet microwave oven,which is subject to PRECAUTIONS and INSTALLATION below .
① RECAUTIONS:
To ensure THIS microwave oven against a poor ventilation work, fires as well as an undue life, a possible
cabinet shall follow:
a) Intake and exhaust port on back surface, as shown in Fig.4.
b) Net depth≥550mm, as shown in Fig.3.
c) Reference plate thickness between 18 and 20mm.
② INSTALLATION:
a) Secure top air guide onto housing while outer-back baffle onto outer-back plate with self-lock
screws,as shown in Fig.1.
Fig.1.
b) Secure holders onto each side housing with self-lock screws,as shown in Fig.2
Fig.2
c)Place microwave oven into cabinet,then fix it with wood screws,as shown in Fig.3.
Cabinet details:
Cavity: (L)560mm*(H)360mm*(D)550mm;
Intake: (L)≥272mm*(W)≥72mm
Exhaust Port: (L)≥272mm*(W)≥72mm
.
Fig.3.
d)Secure ornamental frame to holders,as shown in Fig.4.
The side with gap
should be installed
at the bottom of MWO.
Ornament Frame
e)Final assembly as shown in Fig.5
Fig.4
Fig.5
f)Cabinet airflow chart as shown in Fig.6.
Net Depth≥550mm
Intake
Fig.6
UTENSILS GUIDELINE
It is strongly recommended to use the containers which are suitable and safe for microwave cooking.
Generally speaking, the containers which are made of heat-resistant ceramic, glass or plastic are suitable
for microwave cooking. Never use the metal containers for microwave cooking and combination cooking
as spark is likely to occur. You can take the reference of below table.
Material of container Microwave Grill Combi Notes
Heat-resistant ceramic Yes No No Never use the ceramics which are decorated
with metal rim or glazed
Heat-resistant plastic Yes No No Can not be used for long time microwave
cooking
oN oN seY ssalg tnatsiser-taeH
seY seY oN kcar llirG
Plastic film Yes No No
FOR THE FIRST USE
As there is manufacturing residue or oil remained on the oven cavity or heat element, it usually would
smell the odor, even a slight smoke, It is normal case and would not occur after several times use, keep
the door or window open to ensure good ventilation. So it is strongly recommended to set the oven to grill
mode
and operate dry several times.Operating dry can only be conducted in the grill mode, it can not be
conducted at combination mode.
It should not be used when cooking meat
orchops as the overtemperature may do
damage to the film