Haier AB182ACBDA, AU182AFBAA, HBU-18HD03/R1 Operation Manual

OPERATION MANUAL

No.0010571994

CASSETTE AIR CONDITIONER

AB182ACBDA
AU182AFBAA
(HBU-18HD03/R1)

1

CONTENTS

CAUTIONS

..................................................................................

THE NAME OF EACH PART AND ITS FUNCTION

................

INTRODUCTION TO SPARE PARTS

...................................

GUIDE TO OPERATION

.......................................................

AIR FLOW DIRECTION ADJUSTMENT PROCEDURE

..............

REMOTE CONTROL AND MALFUNCTION JUDGEMENT

.........

FOR COMFORTABLE USE

......................................................

CARE AND MAINTENANCE

...............................................

WARNING OPERATION

......................................................

2-3

4

5-6

7-11

12
13
14

15-17

18-22

2

CAUTIONS

Disposal of the old air conditioner

Before disposing an old air conditioner
that goes out of use, please make sure
it's inoperative and safe. Unplug the
air conditioner in order to avoid the risk
of child entrapment.

It must be noticed that air conditioner
system contains refrigerants, which
require specialized waste disposal.
The valuable materials contained in a
air conditioner can be recycled.
Contact your local waste disposal
center for proper disposal of an old air
conditioner and contact your local
authority or your dealer if you have
any question. Please ensure that the
pipework of your air conditioner does
not get damaged prior to being picked
up by the relevant waste disposal
center, and contribute to
environmental awareness by insisting
on an appropriate, anti-pollution
method of disposal.

Disposal of the packaging of your
new air conditioner

All the packaging materials employed
in the package of your new air
conditioner may be disposed without
any danger to the environment.

Consult your local authorities for the name
and address of the waste materials
collecting centers and waste paper
disposal services nearest to your house.

Safety Instructions and Warnings
Before starting the air conditioner, read

the information given in the User's Guide
carefully. The User's Guide contains very
important observations relating to the
assembly, operation and maintenance
of the air conditioner.

The manufacturer does not accept
responsibility for any damages that may
arise due to non-observation of the
following instruction.

Damaged air conditioners are not to
be put into operation. In case of doubt,
consult your supplier.

All these valuable materials may be taken
to a waste collecting center and used
again after adequate recycling.

The cardboard box may be broken or cut
into smaller pieces and given to a waste
paper disposal service. The wrapping
bag made of polyethylene and the
polyethylene foam pads contain no
fluorochloric hydrocarbon.

3

CAUTIONS

All electrical repairs must be carried
out by qualified electricians.
Inadequate repairs may result in a
major source of danger for the user of
the air conditioner.

Do not damage any parts of the air
conditioner that carry refrigerant by
piercing or perforating the air
conditioner's tubes with sharp or
pointed items, crushing or twisting any
tubes, or scraping the coatings off the
surfaces. If the refrigerant spurts out
and gets into eyes, it may result in
serious eye injuries.

For the purpose of safety, the air
conditioner must be properly grounded
in accordance with specifications.

Always remember to unplug the air
conditioner before opening inlet grill.
Never unplug your air conditioner by
pulling on the power cord. Always grip
plug firmly and pull straight out from
the outlet.

Use of the air conditioner is to be
carried out in strict compliance with the
relative instructions set forth in the
User's Guide.

Installation shall be done by
professional people, don't install unit

by yourself.

Do not obstruct or cover the
ventilation grille of the air conditioner.
Do not put fingers or any other things
into the inlet/outlet and swing louver.

Do not allow children to play with the
air conditioner. In no case should
children be allowed to sit on the
outdoor unit.

Indoor unit

Back up switch

Swing louver

Air blows out from here.
Air flow direction is adjusted.

Air inlet grille
Takes in the indoor air.

Air filter
Removes dust or dirt out of the inlet air.
(In the Air inlet grille)

Air inlet

Outdoor unit

Air outlet

Compressor(inside of unit)

4

THE NAME OF EACH PART AND ITS FUNCTION

Operation

%

INTRODUCTION T O SPARE PARTS

5

Buttons and display of the wire controller.

Cautions:
On cooling only unit, heating
mode is not available.

Note:
The above information is the explanation of
the displayed information therefore varies
with those displayed in actual operation.

CLOCK

Used to set correct time.

TIMER

Used to select
TIMER ON,
TIMER OFF,
TIMER ON/OFF.

TIME

Used to set clock and
timer setting.

Used for unit start and
stop.

Power ON/OFF

MODE

Used to select AUTO
RUN, COOL, DRY,
HEAT and FAN
operation.

FAN SPEED

Used to select fan
speed: LO, MED, HI, AUTO

TEMP

Used to select your
desired temp.

SET

Used to confirm Timer
and Clock settings.

SLEEP

Used to select sleep
mode.

%

INTRODUCTION TO SPARE PARTS

6

OPERATING LAMP

Buttons and display of the wire controller.

DRY

COOL

AUTO

FAN SPEED

TIMER ON

TIMER OFF

CLOCK

TEMP.

FAN OPERATION

HEAT

Clock set

When unit is started for the first time, clock should be adjusted as follows:
Press CLOCK button, "AM"or "PM" flashes.
Press or to set correct time. Each press will increase or decrease 1min. If the
button is kept depressed, time will change quickly.
After time setting is confirmed, press SET, "AM "and "PM" stop flashing, while clock
starts working.

Operation

Remote control

SLEEP