Haier AB182ACBHA, AU182AFBIA, HBU-18HA03/R1, HBU-18HA03, HBU-18HA03/R1B Operation Manual

OPERATION MANUAL
No.0010571312 B
CASSETTE TYPE AIR CONDITIONER
AB182ACBHA AU182AFBIA (HBU-18HA03/R1(B))
1
CONTENTS
CAUTIONS
..................................................................................
THE NAME OF EACH PART AND ITS FUNCTION
.............
INTRODUCTION TO SPARE PARTS
..................................
REMOTE CONTROLLER OPERATION
.................................
GUIDE TO OPERATION
......................................................
AIR FLOW DIRECTION ADJUSTMENT PROCEDURE
.......
FOR COMFORTABLE USE
.....................................................
CARE AND MAINTENANCE
..............................................
WARNING OPERATION
....................................................
2-3
4
5-6
7
8-12
13-15
16 17-19 20-24
2
CAUTIONS
Disposal of the old air conditioner
Before disposing an old air conditioner that goes out of use, please make sure it's inoperative and safe. Unplug the air conditioner in order to avoid the risk of child entrapment.
It must be noticed that air conditioner system contains refrigerants, which require specialized waste disposal. The valuable materials contained in an air conditioner can be recycled. Contact your local waste disposal center for proper disposal of an old air conditioner and contact your local authority or your dealer if you have any question. Please ensure that the pipework of your air conditioner does not get damaged prior to being picked up by the relevant waste disposal center, and contribute to environmental awareness by insisting on an appropriate, anti-pollution method of disposal.
Disposal of the packaging of your new air conditioner
All the packaging materials employed in the package of your new air conditioner may be disposed without any danger to the environment.
Consult your local authorities for the name and address of the waste materials collecting centers and waste paper disposal services nearest to your house.
Safety Instructions and Warnings
Before starting the air conditioner, read the information given in the User's Guide carefully. The User's Guide contains very important observations relating to the assembly, operation and maintenance of the air conditioner.
The manufacturer does not accept responsibility for any damages that may arise due to non-observation of the following instruction.
Damaged air conditioners are not to be put into operation. In case of doubt, consult your supplier.
All these valuable materials may be taken to a waste collecting center and used again after adequate recycling.
The cardboard box may be broken or cut into smaller pieces and given to a waste paper disposal service. The wrapping bag made of polyethylene and the polyethylene foam pads contain no fluorochloric hydrocarbon.
3
CAUTIONS
All electrical repairs must be carried out by qualified electricians. Inadequate repairs may result in a major source of danger for the user of the air conditioner.
Do not damage any parts of the air conditioner that carry refrigerant by piercing or perforating the air conditioner's tubes with sharp or pointed items, crushing or twisting any tubes, or scraping the coatings off the surfaces. If the refrigerant spurts out and gets into eyes, it may result in serious eye injuries.
For the purpose of safety, the air conditioner must be properly grounded in accordance with specifications.
Always remember to unplug the air conditioner before opening inlet grill. Never unplug your air conditioner by pulling on the power cord. Always grip plug firmly and pull straight out from the outlet.
Use of the air conditioner is to be carried out in strict compliance with the relative instructions set forth in the User's Guide.
Installation shall be done by professional people, don't install unit
by yourself.
Do not obstruct or cover the ventilation grille of the air conditioner. Do not put fingers or any other things into the inlet/outlet and swing louver.
Do not allow children to play with the air conditioner. In no case should children be allowed to sit on the outdoor unit.
Indoor unit
Air inlet
Outdoor unit
Air outlet
Compressor(inside of unit)
Swing louver (Air flow direction can be adjusted by using the SWING button on the remote controller)
Air Inlet Grille
Air Filter (Inside of the Inlet Grille)
Operating Control Panel
COMP TIMER OPERPOWER
1 2 3 4 5
Operating Control Panel
6
Remote receiver Compressor Lamp TIMER Lamp OPERATION Lamp Power Lamp Emergency switch
1 2 3 4
5 6
*
4
THE NAME OF EACH PART AND ITS FUNCTION
Adjusting up/down air flow direction
Up/down direction can be adjusted by using the SWING button on the remote controller. Each time pressing this button, the mode changes in the following sequence.
SWING
No indication (louver stopped)
Change to the AIRFLOW mode.
SWING
LOUVER STOPPED
Louver moves in upward and downward directions continuously.
When the LOUVER button is pushed during SWING mode, it stops swinging at the just angle.
Avoid direct air flow to the body for many hours. Avoid downward blowing operation of cooling mode for many hours. Do not touch the swing louver during swing operation.
AIR FLOW DIRECTION ADJUSTMENT PROCEDURE
13
CAUTION
Loading...
+ 11 hidden pages