Haier H3SM-RU03-R2 User Manual

SPLIT TYPE ROOM AIR CONDITIONER

OPERATION MANUAL

H3SM-(9+9+9)RU03/R2(DB)

H3SM-(9+9+12)RU03/R2(DB)

Please read this operation manual before using the air conditioner

No.001056

Cautions

Disposal of the old air conditioner

Before disposing an old air conditioner that
goes out of use, please make sure it's inop­erative and safe. Unplug the air conditioner
in order to avoid the risk of child entrapment.

It must be noticed that air conditioner system
contains refrigerants, which require speciali­zed waste disposal. The valuable materials
contained in an air conditioner can be recycled
.Contact your local waste disposal center for
proper disposal of an old air conditioner and
contact your local authority or your dealer if
you have any question. Please ensure that
the pipework of your air conditioner does not
get damagedprior to being picked up by the
relevant waste disposal center, and contribute
to environmental awareness by insisting on an
appropriate, anti-pollution method of disposal.

Disposal of the packaging of your
new air conditioner

All the packaging materials employed in the
package of your new air conditioner may be
disposed without any danger to the
environment.

The cardboard box may be broken or cut into
smaller pieces and given to a waste paper
disposal service. The wrapping bag made of
polyethylene and the polyethylene foam pads

contain no fluorochloric hydrocarbon.

All these valuable materials may be taken to
a waste collecting center and used again after
adequate recycling.

Consult your local authorities for the name
and address of the waste materials collecting
centers and waste paper disposal services
nearest to your house.

Safety Instructions and Warnings

Before starting the air conditioner, read the
information given in the User's Guide caref­ully. The User's Guide contains very impor­tant observations relating to the assembly,
operation and maintenance of the air
conditioner.

The manufacturer does not accept respon­sibility for any damages that may arise due
to non-observation of the following
instruction.

Damaged air conditioners are not to be
put into operation. In case of doubt, consult
your supplier.

Use of the air conditioner is to be carried
out in strict compliance with the relative
instructions set forth in the User's Guide.

Installation shall be done by professional
people, don't install unit by yourself.

For the purpose of the safety,the air con­ditioner must be properly grounded in acco­rdance with specifications.

Always remember to unplug the air
conditioner before openning inlet grill. Never
unplug your air conditioner by pulling on
the power cord. Always grip plug firmly and
pull straight out from the outlet.

All electrical repairs must be carried out
by qualified electricians. Inadequate repairs
may result in a major source of danger for
the user of the air conditioner.

Do not damage any parts of the air
conditioner that carry refrigerant by piercing
or performating the air conditioner's tubes
with sharp or pointed items, crushing or
twisting any tubes, or scraping the coatings
off the surfaces. If the refrigerant spurts
out and gets into eyes, it may result in
serious eye injuries.

1

Cautions

Do not obstruct or cover the ventilation
grille of the air conditoner.Do not put fingers
or any other things into the inlet/outlet and
swing louver.

Do not allow children to play with the air
conditioner.In no case should children be
allowed to sit on the outdoor unit.

Specifications

The refrigerating circuit is leak-proof.

The machine is adaptive in following
situation

1.Applicable ambient temperature range:

32oC/23oC
18oC/14oC

43oC/26oC
18oC

27oC
15oC

24oC/18oC

-7oC/-8oC

Cooling

Heating

Indoor

Outdoor

Indoor

Outdoor

Maximum:D.B/W.B
Minimum:D.B/W.B

Maximum:D.B/W.B
Minimum:D.B

Maximum:D.B
Minimum:D.B

Maximum:D.B/W.B
Minimum:D.B/W.B

7. The appliance is not intended for use
by young children or infirm persons
without supervision.

8. Young children should be supervised
to ensure that they do not play with
the applience.

9.Please employ the proper power
plug,
which fit into the power supply cord.

10 .The power plug and connecting cable
must have acquired the local attestation.

11.In order to protect the units,please turn
off the A/C first, and at least 30 seconds
later, cutting off the power.

2. If the power supply cord is damaged, it
must be replaced by the manufacturer
or its service agent or a similar
qualified
person.

3. If the fuse of indoor unit on PC board is
broken,please change it with the type of
T. 3.15A/ 250V. If the fuse of outdoor
unit is broken,change it with the type of
T.25A/250V

4. The wiring method should be in line with
the local wiring standard.

5. After installation, the power plug should
be easily reached.

6. The waste battery should be
disposed
properly.

2

Cautions

Safety Instruction

Please read the following Safety Instructions carefully prior to use.

The instructions are classified into two levels, WARNING and CAUTION according to
the seriousness of possible risks and damages as follows. Compliance to the
instructions are strictly required for safety use.

Installation

WARNING

Please call Sales/Service Shop for the Installation.

Do not attempt to install the air conditioner by yourself because improper works
may cause electric shock, fire, water leakage.

lnstallation in a inadequate place may cause accidents. Do not install in the following place.

CAUTION

Connect the earth
cable.

earthing

Do not install in the
place where there is
any possibility of
inflammable gas
leakage around the
unit.

PROHIBITION PROHIBITION

Do not get the unit
exposed to vapor
or oil steam.

3

Check proper
installation of the
drainage securely

STRICT
ENFORCEMENT

Cautions

When abnormality such as burnt-small found,
immediately stop the operation button and
contact sales shop.

WARNING

Use an exclusive power source with a
circuit breaker

OFF

Connect power supply cord
to the outlet completely

STRICT

ENFORCEMENT

Do not use power supply cord
in a bundle.

PROHIBITION

Do not start or stop the
operation by disconnecting
the power supply cord and so on.

PROHIBITION

Do not use for the purpose of storage of
food, art work, precise equipment,
breeding, or cultivation.

STRICT

ENFORCEMENT

Use the proper voltage

STRICT

ENFORCEMENT

Take care not to damage

the power supply cord.

PROHIBITION

Do not channel the air flow directly
at people, especially at infants or
the aged.

PROHIBITION

CAUTION

Take fresh air occasionally especially
when gas appliance is running at the
same time.

Do not use power supply cord

extended or connected in halfway

PROHIBITION

Do not insert objects into the air
inlet or outlet.

PROHIBITION

Do not try to repair or reconstruct
by yourself.

Do not operate the switch with
wet hand.

PROHIBITION

Do not install the unit near a fireplace
or other heating apparatus.

PROHIBITION

Do not place animals or plants in
the direct path of the air flow

PROHIBITION

STRICT

ENFORCEMENT

Check good condition of the
installation stand

PROHIBITION

Do not place any objects on or
climb on the unit.

PROHIBITION

4

PROHIBITION

Do not pour water onto the unit
for cleaning

PROHIBITION

Do not place flower vase or water
containers on the top of the unit.

PROHIBITION

Parts and Functions

Indoor unit

Outlet

Inlet

Inlet grille

UV light degerming
device (inside)

Anion generator

(inside)

Horizontal louver(inside)

(adjust left and right air
flow)

Outdoor unit

Air Purifying

Air filter(inside)

display board(inside)

(adjust up and down air flow.
Don't adjust it manually)

(inside)

Vertical flap

1

OUTLET CONNECTING PIPING AND ELECTRICAL WIRING

2

INLET

3
4

DRAIN HOSE

5

Parts and Functions

19

TEMP

HEALTH FAN

SWING

H.AIR.

MODE

FRESHSLEEP

CLOCK

TIMER

LOCK RESETLIGHT

SET

CODE

20

21

22

23
24

25

26

27
26

28
29

30
31
32

33

1. LOCK

Used to lock buttons and LCD display. If pressed, the
other buttons will be disabled and the lock condition
display appears. Press it once again, lock will be
canceled and lock condition display disappears.

2.LIGHT button

Control the lightening and extinguishing of
the indoor LED display board.

3.CODE

Used to select CODE A or B with a press,A or B
will be displayed on LCD.
Please select A without special explanation.

4. TIMER button

Used to select TIMER ON, TIMER OFF,
TIMER ON-OFF.

5. CLOCK button

Used to set correct time.

6. SLEEP button

Used to select sleep mode.

7. MODE button

AUTO COOL DRY FAN HEAT

8. HOUR button

Used to set clock and timer
setting.

9. HEALTH AIRFLOW button

Used to set the health airflow
mode.

10. HEALTH button

Used to set healthy operation.

11. ON/OFF button

Used for unit start and stop.

12. TIMER ON display

13. FAN SPEED display

LOW HI

14. LOCK
display

MED AUTO

15. SWING UP/DOWN
display

16. SLEEP display

17. HEALTH display

18.FRESH AIR display

19. Operation mode
display

Operation mode

Remote controller

Display board

AUTO HEAT FANCOOL DRY

20.Singal sending display

21. POWER/SOFT display

22. Left/right air flow display

23. TEMP display

Remote controller: to display the TEMP. setting.

24. TIMER OFF display

25. CLOCK display

26. TEMP button

Used to select your desired temperature.

27. FAN button

Used to select fan speed: LOW,MED, HI, AUTO.

28. SWING UP/DOWN button

Used to select up or down air sending direction.

29. SWING LEFT/RIGHT button

Used to select left/right air flow.

30.

FRESH

button

Use to set fresh air function.

31. SET button

Used to confirm timer and clock

32. POWER/SOFT button

settings.
Use to set power/soft function.

33. RESET

When the remote controller appears abnormal,
use a sharp pointed article to press this button
to reset the remote controller normal.

NOTE: Cooling only unit do not have functions and displays related with heating.

The fresh air function is not available.

6

Parts and Functions

Clock Set

When unit is started for the first time and after replacing batteries in
remote controller, clock should be adjusted as follows:

1. Press CLOCK button,"AM" or "PM"
flashes.

2. Press or to set correct time. Each press will increase or decrease
1 min. If the button is kept depressed, time will change quickly.

3. After time setting is confirmed, press SET, "AM" or "PM" stop flashing,
while clock starts working.

Remote controller's operation

When in use, put the signal transmission head directly to the receiver hole on the indoor unit.

The distance between the signal transmission head and the receiver hole should be within
7m without any obstacle as well.

Don't throw or knock the remoter controller.
When electronic-started type fluorescent lamp or change-over type fluorescent lamp or

wireless telephone is installed in the room, the receiver is apt to be disturbed in receiving
the signals, so the distance to the indoor unit should be shorter.

Loading of the battery

Load the batteries as illustrated right
2 R-03 (7#) batteries

Remove the battery cover:
Slightly press" "area and push down the cover

as illustrated.

Load the battery:

Be sure that the loading is in line with the "+" / "-".
request as illustrated on the bottom of the case.

Put on the cover again.

Confirmation indicator:

After pressing power " ", if no display, reload the batteries.
Note:

Full display or unclear display during operation indicates the batteries have been used up.
Please change batteries.

Used two new same-typed batteries when loading.
If the remote controller can't run normally during operation, please remove the batteries and

reload several minutes later.

Hint:

Remove the batteries in case unit won't be in usage for a long period. If there are any display
after taking-out, just need to press reset key.

7

Operation

HEALTH operation

1.Unit start

Remote controller

TEMP

HEALTH FAN

SWING

H.AIR.

MODE

FRESHSLEEP

CLOCK

TIMER

LOCK RESETLIGHT

SET

CODE

Press on/off button (" ") on the remote controller, unit starts.
Health function includes health anion function, UV light

degerming function.

2.Health anion function

Press HEALTH button. For each press, is displayed.
Air conditioner starts health anion function

operation.

For twice press, disappears,the operation
stops.

3.Change-for-fresh-air function(optional)

Press FRESH button , " "displayed on the remote
controller and the change-for-fresh-air function operation begins.
For twice press , the display "
change-for-fresh-air function operation is canceled

When indoor fan motor is running, it has healthy
process function. (It's available under any mode)

When the fan in the indoor unit does not work, the health lamp
lights up, but the anion generator does not release anion.

BRIEF INTRODUCTION TO HEALTH ANION FUCTION

The anion generator in the air conditioner can generate a lot of
anion effectively balance the quantity of position and anion in the
air and also to kill bacteria and speed up the dust sediment in
the room and finally clean the air in the room.

About UV light degerming function

UV light emitted by the UV light device of the indoor unit catalytically
activates the nano TiO2 on the multi-lights touching intermediary,
and the degerming effect is highly efficient and lasting.
Note: when the function is running, don't open the inlet grille.

About change-for-fresh-air function(optional)

1.After the change-for-fresh-air function is initiated, the outside air can
enter the indoors through the change-for-fresh-air tube thereby
keeping the indoor air fresh.

2.Setting the change-for-fresh-air function under the shutdown status:
Under shutdown status, press the fresh key and the remote
controller displays the on status of air flow, low wind, and change­ for-fresh-air functions, and now can set the timing open, timing
close and time control switch. Press on/off button (" ") to cancel
the change-for-fresh-air function.

"disappears and the

8