Haier FFM0180HVCR User Manual

User Manual-
Model #
FFM0180HVCR
18” High Velocity
Floor Fan
Manual del Usuario-
Modelo #
Ventilador de piso
1
English
IMPORTANT SAFEGUARDS
When using this appliance, always exercise basic safety precautions, including the following:
WARNING: To Reduce The Risk Of Fire Or Electrical Hazard, Do Not Use This Fan
With Any Solid-State Speed Control Device.
WARNING: To Reduce The Risk Of Electric Shock And Injury To Persons, Do Not
Use This Box Fan in A Window.
READ ALL INSTRUCTIONS BEFORE USING THIS PRODUCT.
• This product is intended for general use in cooling room temperature.
• Do not use the product for any purpose other than its intended use.
• Never insert fingers or any other object through the Fan Guards. Never drop or insert objects into any opening of the product.
• Do not place this Fan in or near an open window. Rain, snow, and other weather elements may create an electrical hazard.
• Always operate the product on a flat, steady, and stable surface to avoid it overturning.
• Keep the product out of the reach of children and pets. This product is not intended for use by children.
• Do not leave the product unattended while in use, especially when children are present.
• Unplug Fan from wall outlet when not in use or moving to another location or for cleaning.
• Always operate the Fan on a flat, steady, and stable surface to avoid it overturning.
• Keep Power Cord and product away from open flame, cooking or heated surfaces.
• Do not operate Fan near or in the presence of explosive or flammable fumes or materials.
• Never operate the Fan without Guards in place, as serious personal injury may result.
• Do not allow the Power Cord to hang (i.e., over the edge of a table or counter) where it may be tripped over or pulled.
• Do not operate the product if the Power Cord is cut, damaged, or if the wires are exposed.
• Always unplug the product from the electrical outlet when cleaning it. Do not plug/unplug the product into/from the electrical outlet with a wet hand.
• To disconnect, grasp the plug and pull from wall outlet, never pull the Power Cord.
• Do not operate Fan with damaged Cord or Plug, after malfunctions, or dropped, or damaged in any matter. This product has no user-serviceable parts. Do not attempt to examine or repair this product yourself. Return the product to a service center for examination and repair.
English
2
• Do not attempt to open any part of the Motor Housing.
• Do not immerse the Motor Housing, Cord, or Plug in, or expose them to, water or other liquids.
• Do not use outdoors, this product is intended for indoor use only.
• This product is intended for HOUSEHOLD USE ONLY and not for commercial or industrial use.
READ AND SAVE THESE INSTRUCTIONS
CAUTION: This product is equipped with a polarized plug (one blade is wider
than the other blade) as a safety feature to reduce the risk of electrical shock. This plug will fit into a polarized outlet only one way. This is a safety feature. If you are unable to insert the plug into the electrical outlet, try reversing the plug. Do not alter the plug. Do not attempt to defeat the safety purpose of the polarized plug.
CAUTION: If using an extension cord with this product, the marked electrical
rating of the cord set or extension cord should be at least as great as the electrical rating of the product. Never use the plug with anextension cord unless the plug can be fully inserted into the extension cord.
RULES FOR SAFE OPERATION
1. Never insert fingers or any other objects through the grille guard when fan is in
operation.
2. Disconnect the fan when moving from one location to another.
3. Disconnect the fan when removing guards for cleaning.
4. Be sure fan is on a stable, flat surface when in operation.
5. DO NOT use fan in windows. Rain and moisture may create electrical hazard.
CAUTION: Be sure FRONT and REAR GUARDS screw are completely screwed
down in locking position before operation.
TO ADJUST AIRFLOW UPWARD OR DOWNWARD: Tilt fan head to the desired angle. This high velocity fan can be used alone or in conjunction with air conditioning. Rotating the fan head upward serves to pull air from the floor and circulate it throughout the entire room.
How to Adjust Tilt
1. Insert knob to tilt nut.
2. Use knob to loosen tilt nut by turning counter clockwise.
3. Adjust fan head to the desired angle.
4. Tighten the tilt nut by turning clockwise.
5. Keep knob for future use.
Speed Control: Rotate SWITCH to LOW. MIDDLE AND HIGH speeds for desired air velocity. It is normal for the motor to feel warm to the touch after continuous operation. This fan features a thermal cutoff that will automatically shut off the fan should it overheat for any reason. If this happens, immediately unplug the fan from the outlet.
Operating Instructions
English
3
TILT NUT
KNOB
Care and Maintenance
CAUTION: ALWAYS UNPLUG THE PRODUCT FROM THE ELECTRICAL OUTLET PRIOR TO CLEANING IT.
Clean the plastic parts with a mild soap and a damp cloth or sponge. Never use liquids or abrasive cleaners to clean the fan. Periodically check the screws on the product to ensure they are securely tightened. Store the product in a cool, dry place.
English
4
Limited Warranty
This item is warranted to be free from defects in materials or workmanship for a period of five (5) year from the original date of purchase under normal household use. Within the warranty period, we will repair or replace the product at our discretion. This warranty extends only to the original retail purchaser, and excludes any damage to the product resulting from accident or misuse. This product is not covered, when used in a commercial environment, for which it was not intended.
The above warranty is complete and exclusive. The warrantor expressly disclaims liability for any special, incidental, indirect, or consequential damages in connection with the purchase or use of this product or costs over the original purchase price.
Any implied warranties arising by operation of law shall be limited in duration to the terms of this warranty.
This warranty gives you specific legal rights and you may have other rights, which vary by jurisdiction.
Haier America Trading New York, NY 10018
English
5
Made in China
Hecho en China
Haier America
New York, NY 10018
Printed in China
Issued: October-03
IMPORTANT
Do Not Return This Product To The Store
If you have a problem with this product, please contact the "Haier Customer
Satisfaction Center" at 1-877-337-3639.
DATED PROOF OF PURCHASE REQUIRED FOR WARRANTY SERVICE
IMPORTANTE
No Devuelva Este Producto al Establecimiento Compra.
Si tiene problemas con este producto, por favor póngase en contacto con el "Centro
Haier de Atención al Cliente" en el 1-877-337-3639.
PARA EL SERVICIO DE GARANTÍA SE REQUIERE PRUEBA DE COMPRA, FECHADA, No. DE
MODELO Y No. DE SERIE
Loading...