Modern Family-look Design 3 Coo l Settings, 3 Fan Settings
Easy-to-ins tall Mounting Kit
Easy-Access Washable Filter
Digital Time & Temperature Display
24 Ho ur on/off Timer
WARNING
This service information is designed for experienced repair technicians only and is not designed for use by the general public.
It does not contain warnings or c
Products powered by electricity should be serviced or repaired only by experienced professional technicians. Any attempt to service or
repair the product or products dealt with in this service information by anyone else could result in serious injury or death
autions to advise non-technical individuals of potential dangers in attempting to service a product.
1. Product Code Illumination and Series Introduction
1). Model identification:
ESA412K Table of Contents
ESA
A: Abbre viation of Energy Star
B: The type of refrigerant
4:R410A
C: Nominal cooling capacity (BTU/h) with the first two numbers based on one thousand unit
D: Desigh code
Examples:
ESA412K
It represents remote control window air condition r. Cooling capacity is 12000BTU/h and the power supply
is 115V/60Hz.
ƶ
A
ƶƶƶ
B
CD
2). Standard situation/conditions
No. Operating condition
1 Nominal cooling 26.7 19.4 35 23.9
Indoor air state outdoor air state
D.B. ć W.B. ć D.B. ć W.B. ć
2
Domestic Air Conditioner
2. Specification
ESA412KSpecification
ItemUnitESA412K
Cooling capacity
Heating capacity/
Power supplyPh,V, Hz1, 115, 60
Power inputW 1110
Running currentA 10Cooling
BTU/(h.w)10.8
EER
Power inputW /
Running currentA / Heating
COP
/
Sound Level
Case
Packaging
dimensions
Weight
Compressor
Pressure
Refrigerant
Type
Fan
Fan Speed
Indoor sidedB(A)62
Outdoor side
Heightinches
Widthinches
Depth
Heightinches
Widthinches
Depth
Netlbs
Gross
TypeRotary
Model/
Running cap. For compμF
Hi-PressurePsig 560
Low-Pressure
ModelR22 or R410A R410A
Charge
Indoor unit/ centrifugal
Outdoor unit
Indoor unitr/min
67
inches
inches
lbs
Psig 240
OZ 18
/ axial
BTU/h12000
BTU/h
BTU/(h.w)
dB(A)
14 3/8
19
18 1/8
17
21 1/4
22
65
73
44A271AG&09KC
60μF/250
1600/1500/1380
V
Air volumeCFM 270/250/220
Moisture removalPints/hr3.5
3
Domestic Air Conditioner
ESA412K Safety and Precaution
3. Safety and Precaution
WARNING:
1) Air conditioner must be connected to proper electrical outlet with the correct electrical supply .
2) Proper grounding must be ensured to reduce the risk of shock and fire .
DO NOT CUT OR REMOVE THE GROUNDING PRONG.
If you do not have a three-prong electric receptacle outlet in the wall, have a certified electrician install the
proper receptacle . The wall receptacle MUST be properly grounded .
3) DO not use if power cord is frayed or damage . Also avoid using if there are cracks or abrasion damage
along the length ,plug or connector .
4)DO NOT USE AN ADAPTER OR AN EXTENSION CORD.
5)When installing your air conditioner in a window,make sure the window is strong enough to hold the weight
of the air conditioner.You also want to secure and correctly install your air conditioner property to prevent it
from falling.Extra brackets or support may be required depending on your window.
6) Do not black airflow inside or outside the air conditioner with blinds,drapes,protective covers,shrubs or
bushes.
7)Be careful of sharp edges on the front and rear fins of the unit that could cut and cause serious injury.
8)Be careful when lifting the air conditioner to install or remove the unit . Always use two or more people
for this .
9)Always unplug the air conditioner before servicing it or moving it .
Following these basic precautions will reduce the risk of fire ,electrical shock ,injury or death
when using your air conditioner .
4
Domestic Air Conditioner
ESA412K Warning and Cautions
4.Warning and Cautions
WARNINGS:
Following the safety messages is very important.
These messages can save you from being injured or killed. Warning symbols alert you to be
careful and means Danger . Always follow instructions to be safe and reduce chances of injury
or death . Warning and Danger signs will precede safety messages.
Electrical Safety
GROUNDING:
WARNING:
Do not, under any circumstances, cut or remove the third (ground) prong from the
power cord.
Adapter Plug:
This room air conditioner must be grounded. Grounding reduces the risk of electric shock by
providing an escape wire for the electric current. The power cord has a grounding wire with a
grounding plug . Plug it into an outlet that is properly installed and grounded.
Improper use of the grounding plug can result in a risk of electric shock.
Call a qualified electrician if you don’t understand the grounding instructions or if you are not sure
if the air conditioner is properly grounded. If the wall outlet is not grounded, please contact an
electrician to have it replaced with a proper grounded outlet.
We strongly advise against using an adapter plug.
5
Domestic Air Conditioner
ESA412K Installation and Accessory Parts
5. Installation and Accessory Parts
IMPORTANT: Observe all governing codes and ordinances.
Check the location where the air conditioner will be installed.
Make sure you have everything necessary for correct installation.
The location should provide:
■ Grounded electrical outlet within 4 ft (122 cm) of where the
NOTE : Do not use an extension cord.
■ Free movement of air in room to be cooled.
■ A large enough opening for the air conditioner. Installation parts are supplied for double-hung windows.
■ Adequate wall support for weight of air conditioner. Air conditioner weighs 44 lbs to 76 lbs (20.0 kg to 34.5 kg).
NOTE: Cabinet louvers must not be obstructed. Air must be able to pass freely through the cabinet louvers.
■
Plug into a grounded 3 prong outlet.
■
DO NOT remove the ground prong.
■
DO NOT use an adapter.
■
DO NOT use an extension cords.
■
Failure to follow these instructions can result in dea
(For model ESA406K,ESA408K,ESA406K-L,ESA408K-L, ESA406K-T,ESA408K-T,ESA408K-E three c”
screws is needed to attach the top channel to the air conditioner.)