Haier DTA-1492 User Manual

COMBINED 14" TV AND DVD PLAYER
DTA1492
OWNER'S MANUAL
Please read this manual carefully before using this TV set and keep it for future reference.
CONTENTS
Warning and cautions.................................................................................1
Installation...................................................................................................2
Aerial connection........................................................................................2
Preparation of the remote control...............................................................2
Function buttons and external sockets.....................................................3
Front panel of the TV set...........................................................................3
Rear panel of the TV set.............................................................................3
Using the remote control............................................................................4
Basic operation
Switching the TV set on/off........................................................................5
Watching TV ................................................................................................6
Watching TV program................................................................................6
Program swap and auto scan functions.....................................................7
Searching channel.......................................................................................8
Full automatic mode.................................................................................8
Semi-automatic search..............................................................................9
Manual fine tune......................................................................................10
Program skip ...........................................................................................11
Convenient picture and sound control functions...................................12
Multiple picture modes ...........................................................................12
Black stretch and noise reduce................................................................13
Mute and Fade ........................................................................................14
Time functions............................................................................................15
Clock setting and timer on/off functions................................................15
Sleep timer and program preset ...........................................................16
Setup function .........................................................................................17
Screen saver and Calendar.....................................................................17
AVL .........................................................................................................18
Organise function......................................................................................19
Seting the lock...........................................................................................20
DVD Operation
Basic Playback..........................................................................................22
Advanced Playback...................................................................................23
Special Function Playback ......................................................................24
DVD System Setup....................................................................................25
Playable Discs...........................................................................................29
Disc Protection and DVD Characteristics...............................................30
Others
Connection to the external audio and video equipment.......................31
Troubleshooting guide .............................................................................32
Specifications............................................................................................33
Warning and cautions
1. When you clean the TV set, please pull out the power plug from AC outlet. Don't clean the cabinet and the screen with petrol, paraffin or other
powerful solvents. Permanent damage will result !
2. In order to prolong the life of the
product, please use in a well ventilated location.
around it. Do not obstruct air flow with soft furnishings above or beneath.
Leave a 10cm gap
3. Don't place the TV set in direct sunlight or near a heat source.
4. Do not place the TV set near rain or moisture as it may cause an electric shock, or the TV set to catch fire. The TV set must only be used in dry in door locations.
5. The back cover must only be removed by a registered electrical service person. Removing the back cover may result in electric shock, fire or damage to the TV set.
6. If the TV set is not going to be used for a long time, or there is a severe thunder & Lighting storm, we recommended that the TV set be disconnected you disconnect the TV
set from the AC power outlet and remove the aerial plug.
Cleaning the tube
If the picture tube require cleaning, disconnect the power and use a dry soft cotton cloth. Do not use any cleaner or abrasive cloths.
Installation
Aerial Connection
If the picture is not clear or snowy, we recommend that you use an outdoor aerial.In different places, the suitable antenna type and position are different.
300 twin-lead cable
Antenna adapter
(Not supplied)
75 coaxial cable
Plug
(Not supplied)
Aerial input
75 standard
coaxial type
AC power socket
Note: * It is recommended that a 75 ohm coaxial antenna is used to avoid interference. *To avoid interference from electrical signals, do not bind the antenna cable together with any mains lead.
Preparation for the remote control
Battery installation
!
Remove the battery cover.
!
Insert two size AA batteries matching the +/-polarities of the battery to the +/­marks inside the battery compartment.
Tips for remote operation
! When the remote control will not be used for a long period of time or when the batteries are worn out, remove the batteries to prevent leakage.
! Do not throw the batteries into fire. Dispose of used batteries at your local
recycling centre.
! Do not drop, dampen or disassemble the remote control.
22
Function Buttons and External Sockets
Front panel the TV set
Video
R/L Audio
TV/DVD Switching
Menu
Rear panel of the TV set
Power Indicator
Signal Receiver
The DVD Player
Channel Position up/down
Volume up/ down
Play the DVD
Open/close the DVD
Power Switch
Stop the DVD
DVD component Cb terminal
DVD component Y terminal
Video output terminal
Video input terminal
OUT
IN
VIDEO
COAXIAL
Y Cb Cr
L R
COAXIAL
DVD component Cr terminal
Antenna input socket Audio right channel output terminal Audio left channel output terminal Audio right channel input terminal
AUDIO
Audio left channel input terminal
Using the Remote Control
Buttons on the remote control
Stand By
POWER
11
CALL
VOL-VOL-
CALENDARCALENDAR
PAUSE/STEPPAUSE/STEP
STOPSTOP
A-B A-B
ANGLEANGLE
D.CALL
DVD/TV
22
EXIT
REVREV
NEXTNEXTPREVPREV
10+
REPEATREPEAT
AUDIOAUDIO
SETUPSETUP
MUTE
33
TIMETIME
P+P+
MENU
P-P-
FWDFWD
PLAY/ENTERPLAY/ENTER
SLOWSLOW
SLSL
SEARCHSEARCH
OPEN/CLOSE
SWAP
TV/AVP.STD
VOL+VOL+
SCAN
H.LOCK H.LOCK
D.MENUD.MENU
CAPTIONCAPTION
PROGRAMPROGRAMTITLE/PBCTITLE/PBC
DVD Open/close
TV/DVD
Mute
Number Buttons
(Not available)
Digital Selector
Call Screen Display
Former Program
Exit TV Menu
Time Menu
Picture Mode
TV/AV Exchange
Volume Adjust
Channel Selection
TV MENU
Calendar
Scan through TV channels
DVD FAST REVERSE / FAST FORWARD
DVD NEXT
DVD Cursor Move button
DVD PREVIOUS
H.LOCK
DVD PAUSE/STEP
DVD PLAY/ENTER
DVD STOP
DVD MENU
1O+
DVD SUBTITLE
DVD A-B REPEAT DVD SLOW
DVD REPEAT
DVD PROGRAM
DVD ANGLE
DVD TITLE
DVD AUDIO
(Not available)
DVD Status display CALL
DVD SEARCH
DVD SETUP
LEFT
UP
RIGHT
DOWN
Switching on/ off the TV set
This section explains the use of the power button and remote handset to turn your unit on and off.
Switching the TV set on/ off
Switching the TV set on/ off
1 Press the AC power switch on the front of the TV. The power indicator will light.
2 If the indicator is lighting in red, press the button
on the remote control again.
Note
1 When you can't operate the TV set with a
4 AUTO BG
on by
remote control, you can turn it pressing
/- buttons
the P+ on the TV set (Child Lock must
be turned off).
POWER
2 If you want to change to standby mode,
press down the button on the remote
control. Press again to switch back on.
3 If you want to fully switch off the power supply
for the TV set, please press the power switch
button on the front panel.
Auto switch off function
If transmissions are finished for the day, the Automatic Power Off feature will put the TV to standby automatically. The Automatic Power Off feature will not operate in AV mode or when the background is set to off (see page
17).
Watching TV
You can watch a TV program on a channel which has been tuned to a broadcast.
Watching TV programs
How to select TV program
Select the desired program
1 Using number buttons
11
VOL-VOL-
22
33
VOL+VOL+
Directly enter the channel number with the numeric keypad on the remote control. To select channel numbers between 10 ~ 99 press [-/--] button and enter the two digit channel number To select channel numbers between 100 ~ 218 press [-/--] button twice and enter the 3 digit channel number
2 Using the P+/- buttons
Press the P+ button to increase channel number. Press the P- button to decrease channel number.
Select the desired sound Press the VOL-/+ buttons on the remote or the front of the
TV set to adjust the volume level. The range is 0~100. When the volume buttons are pressed the volume level is displayed automatically on the TV screen.
MENU
P-
How to select the menu
Press the MENU button and the menus will appear at the bottom of the screen. The PIC icon will initially be flashing. Each subsequent press of the menu button will highlight SOU (sound), FUN (function), TUN (tuning) icons respectively. Press the P- button to display the appropriate menu.Press EXIT to exit.
Watching TV continued
Press the SWAP button to select the channel you were watching previously. Auto scan function scans through all programs in memory including those with "skip" set to "off" (see "Program skip" on page 13).
Program swap and auto scan functions
Program swap
Press the SWAP button to select the channel you were watching previously.
18 AUTO BG
SWAP
SCAN
Auto program scan
1 Press the SCAN button to scan through all the memorised TV programs. The scan will pause for about 2 seconds on each channel.
18 AUTO BG
3
BROWSE
8 AUTO BG
1 AUTO BG
2
BROWSE
2 If you want to stop the function during auto tunning, simply press the SCAN button again.
1 AUTO BG
Searching channel
This TV set has three methods to set the channels, which are respectively full automatic, semi automatic and manual fine tune.
-
In this section, how to use the remote control to set the channel is explained. You can also use the buttons on the TV set to set channel.
Full automatic mode
Automatic search
1 Press the MENU button. The
MENU
P+
P-
VOL+VOL+
MAIN MENU will appear with the PIC (picture) icon flashing. Press
the MENU button a further 3 times until the TUN (tuning) icon is flashing.Press P- to enter the TUNING menu.
2 buttons to
Press the P+/-
select "AUTO SEARCH".
3 Press the VOL+ button to start automatic search function operates. All channels that are locally available will be preset in the order that they are found. Depending in which location you are, this is generally not in the order you expect. Please see Page 19 (Organise).
PROG NO ORGANISE SEARCH FINE TUNE AUTO SEARCH
PROG NO ORGANISE SEARCH FINE TUNE AUTO SEARCH
AUTO SEARCH
152.25MHz
CALL
Display function
Press the CALL button, then the channel number and the systems will be displayed on the screen.
3 AUTO BG
Searching channel
Continued
Semi-automatic search
MENU
P+
P-
Semi-automatic search
1 Press the P+/- buttons or the PROGRAMME NUMBER (0-9) to choose the desired channel (e.g. Channel 1).
2 Press the MENU button. The MAIN MENU will appear with the PIC (picture) icon flashing. Press the MENU button a further 3 times until the TUN (tuning) icon is flashing. Press P- to enter the TUNING menu.
Press the P+/-
3 buttons to
select "SEARCH".
4 Press the VOL- button to search downwards or the VOL+ button to search upwards.
1 AUTO BG
PROG NO ORGANISE SEARCH FINE TUNE AUTO SEARCH
6
VOL-VOL-
EXIT
VOL+VOL+
SEARCH
152.25MHz
To turn off the on-screen menu
In general, after you press the MENU button, the menu
FUN,TUN
display (PIC, SOU, ) will automatically disappear
within 30 seconds. If you want to eliminate these contents
immediately, please press the EXIT button.
item
Loading...
+ 25 hidden pages