Haier Commercial Cool CPRB07XC7, Commercial Cool CPRB07XC7-B, Commercial Cool CPRB07XC7-E, Commercial Cool CPRB07XC7-W User Manual

User Manua_ M@d÷_# CPRiB@TX¢7_ CPRB@TX¢7oB, CPRB@TX¢7oW_ CPRB@TX¢7oE
Manual d÷_ Usuar_o
P@r@ M@d÷l@ # CPRBOTX¢7_ CPRBOTX¢7oB, ¢_TX¢7°rwI CPRBOTX¢7oE
Befo_eope;x:_tingthisair conditioneb please read these in@uctions completely°
@ @
@ @
Record Your Model and I Nu_bero
Attach the sales receipt to this guide and keep for future references Model and serial number can be obtained from the serial label, which is on your air conditioner_ For dl your service calls during the warran_ period the following information wJJJbe needed:
TABL!
R_¢E_TACLE AND FUSE TYPE_
_0 _5 _0
2)
6)
7)
81
9)
10)
Air conditioner must _ connected to proper eJectricai outlet with He correct dedricd
supply. (s_ table previous page)
Proper grounding must be ensured to reduce the risk of shock and fire. DO NOT CUT OR REMOVE THE GROUNDING PRONG. If you do not have a three-prong elecwic: receptacle outlet in the wall, have a certified eiectrician in4aH the proper receptacle.
The wall receptacle MUST be properly grounded.
Do not operate air conditioner if _wer cord is frayed or otherwise damaged. AJso avoid using it if there are cracks or abrasion damage along the length or plug connector or if
the unit md_nctions or is damaged in any manner. Contact an authorized service _r examination, repairs or adiu4ments.
DO NOT USE AN ADAPTER OR AN E_ENSlON CORD.
Do not block airflow around the air conditioner. _, the exhausthose should be free of
any obstructions.
Always unplug the air conditioner _bre servicing it or moving it.
Do.not install or use the air conditioner in any area "where the atmosphere con_ins
combustibb gases or where the atmosphere is oily or sdphurous. Avoid any chemicals
coming in conrad with your air conditioner.
Do not place any obiect on the top of the unit.
Never operate the air conditioner wi@out the fiJ_rs in pJace.
Do not useHe air conditioner near a _thtub, showeror wash basin°
t
3
Phase keep this manual in a sa_ place.
Do not use liquid or a spray to dean this product. Use a damp cloth. o Do not place the product on an unstabJe surface or devoted place as it may fall and cause damage
or injury.
o Never spi,lJliquid on the control_panel; it may cause dectrical sh_k to the electronic parts inside and
disable them or cause them to function improperly.
Never try to dismantle the product by yoursdf_ Unsupervised dismantling and incorr_t reassembly of the inside of the back caver may damage the eJectricd circuit and affect i_ performance. Hen maintenance is required, pJeasecontact the J_d service center or Jo.caJdistributor.
Thank you br purchasing our Commerical Cool product. Please read this manuaJ carefuJJy before operating and store for future reference StapJe your receipt to your manu,d. You wiJJneed it
to obtain warranty service.
Mode[ number
Seridl number
Date of purchase
3
4
1. This model is easy to operate. The electroniccontrd panel hasa timer, thermostat, three speed coding spas, three fan spe_s and one spe_ dehumidification function (dry).
2. This portable air conditioner does not require water _0 j be added.
3. The unit hasa unique design which thusavoiding the needto empty the
4_EasyotoqnstalJwindow kit is indudd, which consistsof the exhaust hose, 2 hoseadaptors, the window
panel kit and window panel adapton
5oFuJFdbectionaJcas_rs are included to help move the unit to _ conveniently used in almost any area°
6. The filter screenis designed for easyaccessibility of the fiJtero
7. Portableair conditioners are easyto store when not in,use.
4
5
]. Contrd Pand
2. Air OutWet (To be opened manually]
3. Handle Hole
4_ Caster
5. Air Filter
6. Air OutJet (Heat Exhaust_
7. Air intake (Condenser)
8. Remote Contrd Storage FaciJi?
9. Water OutJet Drain
10. Power Supply Cord
2
8
k TEST:WHEN THiS BU_ON iS PRESSED
OR WHEN THE_ _SiA CURREN_ LEAK, THE UNiT WiLL NOT RUN,
[] RESET:AFER SOLVING THE PROBLEM,
PLE_.SEPRESSTHE BUTTON AND THE
UNiT WiLL STARTOPERaTiNG.
g
4
Note: PJease manually open the air outlet jJtem2) to desired position.
6
@
Accessories include
©
i. Plastic panel ° 3 pieces
From 20" (50°5cm)u,p to 46" (1i 6.8cm)
2. Window Pond adapter ° i piece
3. Screws° 4 pieces 4_ Heat Exhaust hose connector - 2 pieces.
5. Heat Exhaust hose o 1 piece
6. Cover ° 1 pieces .................
®
®
1. Push the round Window Panel .Adapter through the rear of the Plastic Panel. Line up the hales and tighten the Adapter with 4 screws that are included in
the kit. (Tighten screws from the front.)
2. Adjust the Plastic Pand to the width or height of your window and tighten the 2 screws that are attached to the pond.
3. install the Window Plastic Panel into the window, if necessary use duct tape to better secure the panel
4_ Connect exhaust boise to the unit by inserting the hose connector that is
attached to the hose into the exhaust. (See illustration A)
5. Move the unit to the window, extend the hose and attach the other end of the hose to the window. Align the tabs on the hose and window panel
adapters and fasten them togethen Plug into waJJoutlet to get ready for operation_
6_
HOTE: Use @n Single @utter Circuit @nJyo
B
Hose Connector
Q Exhaust Hos_
Hose,Connector
/.
/
7
@
¢@n_r@!Pan÷J
Temp and time setting
Receiving sensor
Mod_ light
Power Control (Eme_ency) Warning Light
Power ¢ont_J Thepower control turnsthe unit on and off_ When you press power controJ, the unit begins to operate.
Warning LigB_ Condensed water may accurnuJate in the unit. if the internal tank becomes fuji, the Warning Light wiJl shine and the unit wiJJ not operate untiJ
the unit has been drained.
Ope_ing mode indica_r
indicator cdor of operating mode and LED : When coding mode is seJected, the indicator light wiJJbe bJueo
When dehumidi_ mode is seJected, indicator Jight wiJJ be Orange.
When fan mode is sdected, indicator JightwiJJ be green.
Tempo and Time Setting Jndica_t
During operation, the unit dispJays "present room temperature."
®When setting temperature, the unit wilJ dispJay
set temperature.
When setting the time it dispJays "set time" and
indicator fJashes.
5 seconds after "set temperature" and "set time", it goes. back to "present room tempera-
@
o
Temperature dispJay ranges from 61°F to 89°E When environmental temperature is higher
than the temperature dispJay range, the dispJay
shows "HI".
When environmental temperature is Jower than the. temperature dispJay range, the dispJay
shows "LO".
When the unit stops operating, indicator [ight
goes off.
After switching the air conditioner off, you mustwait 3 minutes before switching it back on again.
7
O
Dehu_idi_ Mode
Air is dehumidified as it passes through air conditioner, without being in fuji coding mode_
if room temperature is greater than 77°B fan speed can be adjusted; otherwise fan speed is
fixed to "bw."
Fan Mode Air is circulating throughout the room with no coding.
N@te: Unit does not need to be vented in
FanMode.
P@wer ¢@nt_J
The power control turns the unit on and off:. Mgde ¢@nt_J There are 3 modds d Operations: "Cod" (When
unit is coding), "Dehumidify", and "Fan" (only Fan running). A mode indicator light on the unit control panel shows the following colors: Blue br'Cooi" mode; Orange br"Dehumidify", and Green for "Fan".
The unit wiJJsta4 in "Cod" made with a Blue
indicator lighL Once you press the "Mode" button
on the remote, it wiJJchange to "Dehumidi_" mode.
Pressthe,"Mode" button again to get "Fan" mode. it goes back to the "Cad" mode once the "Mode" buttan is pressed again°
Note: When you press "Up" and "Down" buttons and there is no response, please press the "Mode" button, until the unit indicator light is Blue ("Cod"),
you can, then adju4 the temperature accordingly.
o Cooling Mode,
During the cading mode the air is coded and hot air is exhausted to the outside air through the air exhaust hose_ Adjust fan speed and temperature to suit your desired comfort level N@te: The air exchange hoses must vent outside the room when using Cod Mode.
Fan Speed ¢ont_J The Fan Speed Contrd has 3 settings:
High, Medium and Low.
Te_p _t ¢@nt_Js Press "Up" or "Down" to set temperature. setting range is from 61°F to 89°F_
The
Note::When using Dehumidify or Fan Mode, temperature setting button is invalid.
Fahrenhei_i Celsius SeJec_or Pressthe °C / °Fswitch button, to switch between
°Fand °C. Note: initial setting is °F_
Ti_er S÷_ing ¢ont_J
®When you use the timer setting button while the
unit is operating, you can preset a time for the unit to turn off.
When you use the timer setting button while the unit is on standby, you can,present a time for
the unit to turn on_
Jfyou press the '_ONiOFF" button, the preset timer function wiJJbe cancelled.
®Timer se_ing range is 1~24 hours.
Ti_er Cancel Contain
o You,can cancel the timer setting at any time by
pressing the "Cancel _ button_
8
9
@ _@ @
Voltage and Frequency 1t5V / 60Hz input: Power 800 W Cooling Capacity 7000 BTU Moisture Removal (pints/day) 70
R-22/12.70z°
Timer 24 Hours Operating Temperature Range 61°F- 100°F
Unit Dimensions (WxDxH) 17-15/16"x 13-_/8,'x 24-3/8"
Net Weight (approximate) 55.1 Ibso Exhaust Hose 5 Feet
Always unplug your air conditioner before c_aning°
@
0
Air filter needs b be dleaned at least once a week for your unit b operate at optimum
efficiency. Slide out the filter from the back by pulling on the tab. The filter may be washed or vacuum@& Remove the excess water from the filter by gently shaking the fiJlter.This will remove dust and particles trapped in the filter. After cleaning, reinstall the fiJten DO NOT use your air conditioner without the air filter in place.
0
To dean the cabinet, DO NOT use harsh, chemicais, abrasives, ammonia, chlorine, bleach,
concentrated detergents, sdvents or metal scouring pads. Some of these chemicals may dissolve, damage and/or discolor your air conditioner.
o Always use a soft cloth dampened with water or a mild soap and water soJutioin to wipe the
front of the cabinet. Wipe dry with a sos cloth.
To store your air conditioner when not in use for a long period of time, drain condensed water using the drain pipe. Remove exhaust hose, dean the filters, cover with plastic bag
and store.
9
10
@
If air conditioner does not o
o Check if unit _i plugged in,_The pUugmay have come _oos_i_ o Press"Reset" bu#on on €he plug fo resume opera_iono _'Check if the ebctrical wall receptacle is of proper voltage_ eiCheck if the circuit breaker needs to be reset or if the fuse needs to be replace&
oiCheck if the unit is in "Off" mode. o If the warning light is on, drain the water drain pipe by removing the piug_
Air cendifioner is working but room is not ¢_|ing:
_i _OOm may have appliances that produce heat. Use an exhaust fan to remove excess heat.
o Check exhaus_ hose for proper insta!lafion. ® Redirect the airflow. Remove any obstacles, o AH doors and windows need to be closed so that cooi air does not escope the room_ ®'Air filter may be Nlocked or may need cleaning. ® Unit BTU may be too low for the required cooling area.. o On extremely hot & humid days, air conditioners may take a little longer to cook ®'Drain, the water drain pipe by removing _he plug. oi Unit may be in fan or dry mode. Put air conditioner in cool mode.
10
@ @
?his _arran_/covers aimdefects _n _ork_anship or _a_ria_s for:
.
The mechanical and electrical parts (including
labor costs) c@ntained in this product for a period of 12 months, from the date of purchase
(commerda[ or rental application, the warranty
is 90 days).
2_
The sealed systemand compressor contained
in this product is for a period of 5 years, from the date of purchase (excluding labor costs after the initial 12 month period), in coimmerciaJ or rental use, the additional limited compress@Jr
warranty is for 1 year and 9 months (excluding labor costs after the initial 90' days period).
You _ust keep and be able _ p_vlde your or_glnam saJes r÷ceip_ as p_f of _h÷
da_ of purchaseo
Who is cove_d?
The original retail purchaser of this product.
_at wJJ[ be d@ne?
HalerAmerica will repair or replace in your home, any
mechanical, electrical part or the compressor, which, proves defective in normal household use for a period of 12 months.Haler _eri_ wiJ[ repair or
replace (excluding labor costs) the sealed system and compressor (parts onlyl for an additioind 4 year period.
How can you get semite?
1. Contact your nearest Haier Ameri_ Authorized Service Depot. For the name of the Service Depot nearest you, contact Haler America at
(877) 337°3639°
2. AJ[ service must be performed @ an authorized Haler America Service Depot°
THiS WAR_NTY COVERS UNITS W|TH_N THE CONTINENTAL _J_T_D STAT_$,
¢A_A_A A_D P_TO _¢0 AND
® Damages from improper installation.
o Damages in shipping°
Damages from misuse, abuse, accident,
alteration, Jack of proper care and
Damages from service, by other than an authorized dealer or service center.
® LaboB service, transportation and shipping
charges for the removal of defective parts and
installation of a replacement part, beyond the initial 12 month period_
THiS LiMiTED WARRAN_ [S GIVEN iN LiEU OF ALL OTHER WARRANTIES, EXPRESS OR iMPLiED, iNCLUDiNG THE WAR_NTJES OF
MERCHANTABiLiTY AND FITNESS FOR A PARTICULAR PURPOSE°
The remedy provided in this warranty is exclusive and is granted in lieu of dl other remedies. This warranty does not cover incidental or consequential damages. Some states do not allow
thJe exclusion of incidental or consequential
damages, so this limitation may not apJpJy to yOU. Some states do not allow limitations on how long an implied warranty lasts, so this [imitation may not apply to you. This warranty gives you specific Jegd rights, and you may also have other rights, which vary from state to state_
11
Loading...