Haier C2010 User Manual
Safety Precautions
Please read these simple guidelines. Not following them may be
dangerous or illegal. For further information, see the section of
‘Warnings and Precautions’.
Contents
1.Getting to Know Your Phone...........................1
2.GettingStarted......................................5
3.Basic Functions .....................................6
4.TextEntry.........................................12
5.Contacts ..........................................14
6.Messages .........................................19
7.Call history ........................................23
8.Settings...........................................24
9.Profiles ...........................................32
10.Fun and Utilities...................................34
11.Games...........................................36
12.TATAzone........................................37
13.Mydata..........................................38
14.SMSservices.....................................39
15.Care And Maintain .................................40
1Getting to Know Your Phone
Packing list
Basic specification
Your phone package box contains the following items:
Please refer to the packing list on the last page.
Size: 99.1 mm [L] ×41mm [W] ×14.0mm [H]
Weight: (including 800mAh Li-polymer battery)
Standby Time: about 115 hours
Talking Time: about 3 hours
Notice:
Standby time is the handset continuous working time without making
phone calls. Standby time and talking time are both depending on
mobile phone using situations, network situations and environments.
60g
1
&
Mobile phone appearance
Mobile phone view
2
134
6
2
5
7
The appearance of the mobile phone and introductions
Icon bar
Notice:
Long press means pressing key more than or equal 2 seconds; short
press means pressing key less than 2 seconds.
3
&
4
2Getting Started
Install and charge the phone
1. Remove the battery cover 2. Insert the RUIM card
3. Install the battery 4. Plug the travel charger into the phone
5
3Basic Functions
Switching On/Off
Power Key
Making phone call
Making phone call using the keypad
Send Key
Save number
End Key
Making phone call using contacts
In the power off status, long press the to switch on the
phone.
1.In the standby mode, enter the phone number you want to dial,
and press the to make the call.To delete a character to
the left of the cursor, press <Clear>.To save the number, press
<Options> and select .
2.To end the call, press the .
In the power on status, long press the to switch off the
phone.
Power Key
6
1.In the standby mode, press <Contacts> or press <Menu> to
access the ;
2.Select to view the contacts list, and press to
choose a contact, or select to search out the contact you
want to call, either by name or by number.
3.Press the to make the phone call.
1.In the standby mode, press the to display the last 10
numbers dialled.
2.Scroll to the number or name you wish to redial, and press the
.
In standby mode, long press a number key to make phone call. See
for more information about configuring speed
Main menu > Contacts
List Up/Down key
Search
Send Key
Making phone call using last dialled number
Send Key
Send Key
Making phone call using speed dial
chapter 5 contacts
7
dial.
Conference calling is a network service that allows you to take part
in a conference call with other participants.
1.Make a call to the first participant.
2.Enter the phone number of the second participant; or retrieve a
number from your Contacts, press <Search> and find out the
number you want to call.
3.Press the , The first participant is put on hold.
4.When the second participant picks up, press the to
connect the calls. (After the conference is initiated, can
be used to switch between both parties).
5.To end the conference call, press the .
Making a conference call
Send Key
Send Key
Send key
End Key
Notice:
8
&
Whether conference ways calling can be enabled or not depends on
whether the network provider supplies this function and whether
you have applied for such faction.
1.To answer the call, press the or select <Accept>.
Press <Silence> to mute the ringing tone before you answer the call.
2.To reject the call, press the or select <Reject>.
Press the navigation key of your phone to adjust the volume of the
earpiece, during a call.
When adjusting the volume, a bar chart appears in the display
indicating the volume level.
Answering the call
Answer or silence an incoming call
Send Key
End Key
Adjust the earpiece volume
Answer a call with the keypad locked
9
To answer a call with the keypad locked, simply press the .
During the call, all features function as normal. When you end or
reject the call, the keypad automatically relocks.
Send Key
Operations during a call
During a call press <Options> and one of the following options:
Contacts, Messages, DTMF on (off), New call, Mute on (off), Phone
info, Voice privacy.
The keypad lock can prevent you form accidental calls. If the
keypad is locked, it unlocks when you receive a call. After the call,
the lock automatically relocks. Phone will return to idle mode after 2
mins if phone is left idle within sub menus and then it will activate
key lock after set delay.
When the keypad is locked, calls may be possible to the official
Keypad lock
10
emergency number programmed in your phone.
Press [*] key for more than 2 seconds to unlock the keypad.
11
Loading...