Reproduction, transfer, distribution or storage of part or all of the contents in this
document in any form without the prior written permission as Haier Telecom Co..,
Ltd.
Statement
The contents of this manual maybe different with the cell phone please
according the cell phone.
Haier Telecom reserves the right to revise this document or withdraw it at any
time without prior notice.
Safety Precautions
Please read these simple guidelines. Not following them may be dangerous or
illegal. For further information, see the section of ‘Warnings and Precautions’.
1 Getting to Know Your Phone......................................................................1
Contents
2 Getting Started ............................................................................................5
13 Care And Maintain...................................................................................28
1Getting to Know Your Phone
Packing list
Your phone package box contains the following items:
Please refer to the packing list on the last page.
Basic specification
Size: 100 mm [L] ×43.5 mm [W] ×13.6 mm [H]
Weight: 65g (including 800 mAh Li-polymer battery)
Standby Time: about 200 hours
Talking Time: about 4.5 hours
Notice:
&
Standby time is the handset continuous working time without making phone calls.
Standby time and talking time are both depending on mobile phone using
situations, network situations and environments.
1
Mobile phone appearance
Mobile phone view
2
The appearance of the mobile phone and introductions
3
Notice:
&
Long press means pressing key more than or equal 2 seconds; short press
means pressing key less than 2 seconds.
Icon bar
4
2Getting Started
Install and charge the phone
1. Remove the battery cover2. Insert the RUIM card
3. Install the battery4. Plug the travel adapter into the phone
5
3Basic Functions
Switching On/Off
In the power off status, long press theto switch on the phone.
In the power on status, long press theto switch off the phone.
Making phone call
Making phone call using the keypad
1.In the standby mode, enter the phone number you want to dial, and press the
Send Key
right soft key.To save the number, press left soft key and select.
2.To end the call, press the.
Making phone call using contacts
1. In the standby mode, pressto access the;
2. Selectto view the contacts list, and pressto choose a
contact, or selectto search out the contact you want to call, either by
name or by number.
3. Press theto make the phone call.
Making phone call using last dialled number
1.In the standby mode, press theto access the All calls screen.
2.Scroll to the number or name you wish to redial, and press the.
6
to make the call. To delete a character to the left of the cursor, press
End Key
left soft key
ListUp/Down key
Search
Send Key
Power Key
Power Key
Save number
Main menu > Contacts
Send Key
Send Key
Making phone call using speed dial
In standby mode, long press a number key to make phone call. See chapter
contacts for more information about configuring speed dial.
Making a conference call
Conference call is a network service that allows you to take part in a conference
call with other participants.
1.Make a call to the first participant.
2.Enter the phone number of the second participant; or retrieve a number from
your Contacts, press <Search> and find out the number you want to call.
3.Press the, the first participant is put on hold.
4.When the second participant picks up, press theto connect the
calls. (After the conference is initiated,can be used to switch between
both parties).
5.To end the conference call, press the.
&
Whether conference ways calling can be enabled or not depends on whether
the network provider supplies this function and whether you have applied for
such faction.
Answering the call
Send Key
Send Key
Send key
End Key
Notice:
7
Answer or silence an incoming call
1.To answer the call, press theor select <Accept>.
Send Key
Press <Silence> to mute the ringing tone before you answer the call.
2.To reject the call, press theor select <Reject>.
End Key
Adjust the earpiece volume
Press the navigation key of your phone to adjust the volume of the earpiece,
during a call.
When adjusting the volume, a bar chart appears in the display indicating the
volume level.
Answer a call with the keypad locked
To answer a call with the keypad locked, simply press the.
Send Key
During the call, all features function as normal. When you end or reject the call,
the keypad automatically locked again.
Operations during a call
During a call pressand one of the following options: Contacts,
left soft key
Messages, DTMF on (off), New call, Mute on (off), Phone info, Voice privacy.
Keypad lock
The keypad lock can prevent you from accidental calls. If the keypad is locked, it
unlocks when you receive a call. After the call, the lock automatically locked
8
again.
When the keypad is locked, calls may be possible to the official emergency
number programmed in your phone.
Press [*] key for more then 2 seconds to unlock the keypad.
9
4Text Entry
Text input method
Your phone provides following text input methods:
English input method: input English characters;
Numeric input method: input numeric characters;
Change the input method
Press [*] to switch between upper case, lower case and word/sentence case;
Long press [*] to enter symbol list;
Press [#] to switch between Intelligent, Multi-tap and Numeric mode.
Press [1] to insert common symbol under the intelligent mode or multi-tap
mode.
10
5Contacts
You can save names and phone numbers (contacts) in the phone memory or in
the RUIM card memory.
Add new
1.In the standby mode, pressto access the
> Add new
2.Change the settings and enter information about the contact (saved in).
3.In thescreen, you can input name, default, mobile number, home ,
office, E-mail, URL, Address and Note.
4.Pressand one of the following: Edit and Save.
List
Display all of the contacts. It will show the contacts list arranged alphabetically,
you can press the key corresponding to the first letter of the name to search.
Use Add to blacklist menu to block some numbers for incoming calls. Use Add to
whitelist menu to allow some numbers for incoming calls. Search for a record
and pressand one of the following: View ,Call, Send message,
;
Add new
left soft key
left soft key
left soft key
Main menu > Contacts
Phone
11
Send card, Edit, Delete, Copy, Add to blacklist and Add to whitelist.
Search
In Contacts menu, choose Search and enter, there are two options: By name, By
number. If you input the wrong name or the wrong number, the phone will inform
you ‘No match found’.
Groups
You can classify a number of contacts into one group in accordance with their
social relationship, for example: RUIM, Family, Friend, Colleague, VIP, Custom
and Default.
Highlight a group, pressand one of the following options: Rename:
left soft key
Edit the group's name (RUIM and Default can not be renamed), Ringer, List, Add
new (RUIM can not be added new).
Multicopy
1. In the standby mode, pressto access the
>Multicopy
;
left soft key
Main menu > Contacts
2. The menu includes Copy all, Copy selected.
Speed dial
Use this menu to assign a speed dial number for your most frequently dialled
numbers. In Idle mode, press and hold the appropriate key to dial the speed dial
12
entries.
Delete
1.In the standby mode, pressto access the
;
> Delete
2.Selectto delete all contacts (when we select delete all we have to
Delete all
left soft key
Main menu > Contacts
inter security code then we can delete all record, the security code is 0000).
Selectto select the contacts that you want to delete.
Delete selected
Storage Location
Use this feature to choose storing phone numbers on your RUIM card or in your
phone's memory.
Memory status
Check the number of contacts you have stored in the phone's memory and on
the RUIM card.
My number
Use this feature to check your phone number, or to assign a new number.
Changes made here do not affect the actual subscriber numbers on your RUIM
card.
13
6Messages
Your phone is capable of creating, sending and receiving text messages.
Write message
Choose theoption in messages menu. Editing message is done
in the text editing interface. Enter your message. Press left soft key to access
the following options: Send, Insert symbol, Insert expression, Insert templates,
Insert number, Save to draft.
Inbox
1.In the standby mode, pressto access the
Messages > Inbox
2.While viewing a message, pressto access the following
options:Read, Reply, Forward, Delete,
Outbox
1.In the standby mode, press Delete all to access the
14
Write Message
;
left soft key
left soft key
Delete all.
Main menu >
Main menu > Messages
> Outbox
2.While viewing a message, pressto access the following options:
Read, Resend, Forward, Delete,
;
left soft key
Delete all.
Draft
You can read draft messages saved in Draft. Pressto access the
left soft key
following options: Send, Delete and Delete all.
Trash
You can read Trash messages saved in Trash. Pressto access the
left soft key
following options: Read, Delete and Delete all.
Archive
You can read archive messages saved in Archive. While viewing a message,
pressto access the following options: Read, Forward, Delete.
left soft key
Templates
1.In the standby mode, pressto access the
Messages > Templates
left soft key
;
Main menu >
2.Select the template message you want to use.
left soft key
3.Pressto edit, delete and send.
Delete messages
In the standby mode, pressto access the
left soft key
Main menu > Messages
15
>Delete messages
and one of the following options: Inbox, Outbox, Draft, Trash,
Archive, Delete selected, Delete all.
Message settings
In the standby mode, pressto access the
> Message setting
left soft key
and one of the following options: Storage location, Priority,
Main menu > Messages
Delivery report, Maximum period, Validity period, Auto save, Auto delete and
Reject SMS.
Memory status
View the amount of memory currently in use for messages.
Voice mail
The voice mailbox is a network service and you may need to subscribe to it. For
more information and for your voice mailbox number, contact your service
provider.
16
7Call history
Call history stores information about the last Missed calls, Received calls, or
Dialled calls. It also adds the total duration of all calls. When the number of calls
exceeds the maximum, the most last call replaces the oldest.
17
8Settings
The settings menu provides you with various setting options to customize the
phone to your preferences and needs. You can also reset the settings to their
default status.
Display
Wallpaper
You can set an image as wallpaper for the phone display.
In the standby mode, pressto access the
Display > Wallpaper
Predefined wallpapers
Banner
Use this menu to choose whether the display shows a customized banner under
the operation logo, when the phone is in the standby mode.
Backlight
You can control the time-out of the backlight on your phone.
Contrast
18
left soft key
and one of following:
: Select predefined pictures for wallpaper.
Main menu >Settings >
You can adjust the contrast of the display for varying lighting conditions.
Phone setting
Use this menu to change the setting of Auto keylock, Input setting, and Time
format.
Auto keylock
Use this menu to set the keypad of your phone to lock automatically after a
preset time delay when the phone is in the standby mode and no function of the
phone has been used.
Input setting
Use this menu to set the default input method for editing.
Time format
Use this menu to change the time format and display on your phone.
Call setting
Answer call
Use this menu to set the phone answer call method. Press any key to answer
call except left soft key [Silence], right soft key [Reject], End key. A compatible
headset or enhancement needs to be attached to the device for the call to
function properly.
Auto answer
19
Set the phone to answer the incoming call automatically after 5 sec.
Voice privacy
Use this menu to protect your voice content during a call.
Auto redial
Set the phone to make up to three attempts to redial a phone number after an
unsuccessful call in the standby mode.
Call forward
This network service reroutes incoming calls to a phone number that you specify.
Call waiting
If your wireless provider supports this feature, call waiting notifies you of an
incoming call even while you are in a call. You can accept, reject, or ignore the
incoming call.
International prefix
The phone will replace + with ‘009’ or the respective international call code of
the country.
Call time
Use this menu to display or hide the call time during your conversation and call
ended screen.
Firewall
20
Call
Use this menu to block or allow some numbers for incoming calls.
Private
Use this menu to protect your content of message, contacts, and call history for
accessing by other person. To access the menu, you must enter the preset lock
code. By default, the preset lock code is 0000.
Security
To access security for the every time, you must enter the preset lock code. By
default, the preset lock code is 0000. If none of this work, contact your wireless
service provider for help.
Phone lock
The phone lock feature protects your phone from unauthorized outgoing calls or
unauthorized access to information stored in the phone. When phone is locked,
to unlock user must enter the preset security code. When the device is locked,
you can still call the official emergency number programmed into your phone.
PIN management
In the standby mode, pressto access the Main menu >Settings >
left soft key
Security> PIN management and one of the following menus: Enable PIN,
Disable PIN and Change PIN.
21
Change security code
By default, the preset lock code is 0000.
Call restriction
This network service allows you restrict your calls.
Factory reset
Use this menu to reset the phone's settings you have changed.
Clear memory
Use this menu to clear all data (include Call history, Contacts (Phone), Contacts
(RUIM) or Clear all) that you have stored.
Phone info
You can get S/W version, H/W version, and PRL version.
22
9Profiles
Profiles define how your phone reacts when you receive a call or message, and
other settings for each of the available profiles can be left at their default settings,
or customized to suit your needs. The following profiles are available:,
,and.
Silent MeetingOutdoor
Activate
In the standby mode, pressto access the
,,or;
General Silent MeetingOutdoor > Activate
Personalize
In the standby mode, pressto access the
,,orand one of following:
General Silent MeetingOutdoor > Personalize
Prompt, Ringers, Volume, Alerts.
Rename
In the standby mode, pressto access the
,,orand edit the name.
General Silent MeetingOutdoor > Rename
left soft key
left soft key
left soft key
Main menu > Profiles >
Main menu > Profiles >
Main menu > Profiles >
General
23
10Fun&Utilities
Your phone contains features to help organize your life, including Alarm,
Scheduler, Calculator, Stopwatch and FM.
Alarm
Use this menu to set alarms. The alert type for a normal alarm corresponds to
the call alert type settings.
Scheduler
Use this menu to enable you to keep track of reminders. It can even sound an
alarm for any of these events.
Calculator
Use this menu to perform basic arithmetic functions, such as addition,
subtraction, multiplication, and division.
Stopwatch
Press thefunction button the start the time counting; press the
soft key
status.
24
left soft keyleft
button again to suspend the time counting; Press the end key to standy
FM
The FM depends on an antenna other than the wireless device's antenna. A
compatible headset or enhancement needs to be attached to the device for the
radio to function properly.
25
11Games
Two games are provided in the phone, including LinkLong and MagicBlock.
26
12Enhanced services
This UTK option allows you to access a range of SMS based services that help
you do more. Simply select the desired service from the service menu. To get
the list of services available for your handset or for assistance on any of these
services. There are different menus according to different RUIM cards.
27
13Care And Maintain
If your mobile phone had abnormal conditions, please check it with the following
table. If the problem still remains, please ask mobile phone sales for help.
28
HC-C2001
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.