Page 1
Page 2
Page 3
Watching TV continued
Swap function enables quick swap to the last watched program.
Auto scan function enables automatic successive scanning of all the programs in
memory with (each channel will last about 2 seconds)."OFF" skip status
Program swap and auto scan functions
Program swap
SWAP
1 Suppose the channel number
you used just now is 8 and the
channel number you are using
is 18 (as shown in the figure).
2 If you want to return to the
last watched program channel
8, you can simply press the
SWAP button.
3 If you want to return to
channel 18, press the button
again. Through this function,
you can easily change
between the channel you are
using and the channel you
used last time.
18
AUTO
BG
8
AUTO
BG
18
AUTO
BG
SCAN
Auto program scan
1 If you want to select a
desirable program, you may
scan all the TV programs in
memory. You can simply press
the SCAN button to do this. The
program numbers will appear
one after another from
beginning to end (each channel
number will last about 2
seconds).
2 If you want to stop the function
during auto scanning, simply
press the SCAN button again.
3
AUTO
BG
SCAN
1
AUTO
BG
SCAN
1
AUTO
BG
SCAN
2
AUTO
BG
SCAN
Page 4
Switching on/ off the TV set
In the following, the methods of using power switch and remote control to switch
on/off power supply for the TV set will be explained.
Switching on/ off the TV set
Switching on/ off the TV set
1 Please press the power switch to switch on AC
power supply and the power indicator will be light .
Infrared sensor window
Power switch
MENU
/
AV TV
(input selector
Volume up/ down
Power indicator
Channel selector
2 If the indicator is lighting in red, press the button
on the remote control again.
Note
1 When you don't operate the TV set with a
remote control, you can turn on it directly by
pressing the program on the front panel
buttons
of the TV set, when child lock is off.
4
AUTO
BG
2 If you want to exchange to standby status,
please press the button on the remote
control.
3 If you want to fully switch off the power supply
for the TV set, please press the power switch
button on the front panel of the TV set.
Auto switch-off function
When the "Back ground" function is ON, if an
empty channel is selected or the TV programs
are ended for the day, the power will be switched
off 5 minutes later automatically. If the "OFF
TIME" is ON, it will be switched off according to
the preset time. The auto power off function does
not work or when the background is off.
(Note: If the "OFF TIMER" is less than 5
minutes, it will be switched off automatically to the
preset time. )
Page 5
Watching TV
You can watch TV program in a preset channel.
Watching TV program
How to select TV program
Select the desired program
1 Using "Program number" buttons
When to select a channel number with one digit, please press
some a number among 0-9 to select desired channel.
When to select a channel number with two digits, please
press the [-/-- ]button to show "--" on the top left of the screenand
then press two numbers among 0-9 to select desired channel.
When to select a channel number with three digits, please press
the [-/--] button to show "---" on the top of the screen and then
press three numbers among 0-9 to select desired channel.
2 Using the CH+/- buttons
Press the CH+ button to select a channel number in number
TUNE
increasing
Press the CH- button to select a channel number in number
decreasing
Select the desired sound
Press the VOL+/- buttons to adjust volume.
If the colour or sound of some channel is abnormal
The settings of the colo r
system or the sound system
may be wrong.
Press the TUNE button and
setting menu shown on the
right will display on the screen.
direction.
direction.
u
TUNE
COLOUR AUTO
SOUND BG
BAND VHFL
SKIP OFF
PROGRAM 0
SEARCH
FINE TUNE
AUTO SEARCH
If the picture colo r is not normalu
Press the CH+/- buttons to move cursor to "COL UR",
press the o
then VOL-/+ buttons to select the correct col ur
system.
In general, you can set it as "AUTO". AUTO,PAL,NTSC ,
NTSC443 and SECAM will display in turn.
O
If the picture sound is abnormal
Press the CH+/- buttons to move cursor to "sound",then
press the VOL-/+ buttons to select the correct sound system.
In general, BG will display in turn.DK,
Page 6
Watching TV Continued
Swap function enables quick swap to the last watched program.
Auto scan function enables automatic successive scanning of all the programs in
memory with (each channel will last about 2 seconds), so that you are
"OFF" skip status
free from the trouble of pressing keys.
Program swap and auto scan functions
Program swap
Suppose the channel number
1
SWAP
you used just now is 8 and the
channel number you are using
is 18 (as shown in the figure).
2 If you want to return to the
last watched program channel
8, you can simply press the
SWAP button.
3 If you want to return to
channel 18, press the button
again. Through this function,
you can easily change
between the channel you are
using and the channel you
used last time.
18
AUTO
BG
8
AUTO
BG
18
AUTO
BG
SCAN
Auto program scan
1 If you want to select a
desirable program, you may
scan all the TV programs in
memory. You can simply press
the SCAN button to do this. The
programs will appear one after
another from beginning to end
(each channel number will last
about 2 seconds).
2 If you want to stop the function
during auto scanning, simply
press the SCAN button again.
1
AUTO
BG
SCAN
2
AUTO
BG
SCAN
3
AUTO
BG
SCAN
1
AUTO
BG
Page 7
Searching channel
This TV set has three methods to set channel, which are respectively full automatic,
semi automatic and manual fine tune.
-
In this section, how to use remote control to set channel is explained. You can also
use buttons on the TV set to set channel.
Full automatic mode
TUNE
1 Press the TUNE menu button ,
till the TUNING menu shown on
the right display on the screen.
Press the CH+/-
2 buttons to
move cursor to "AUTO
SEARCH".
TUNE
COLOUR AUTO
SOUND BG
BAND VHFL
SKIP OFF
PROGRAM 0
SEARCH
FINE TUNE
AUTO SEARCH
TUNE
COLOUR AUTO
SOUND BG
BAND VHFL
SKIP OFF
PROGRAM 0
SEARCH
FINE TUNE
AUTO SEARCH
3 Press the VOL+ buttons to
make automatic search
function work. All channels now
playing program will be
automatically preset in order .
After preset finished, the first
program number will display on
the screen.
CALL
Display function
Press the CALL button, then
the channel number and
system will be displayed on
the screen.
3
AUTO
BG
Page 8
Searching channel Continued
Semi-automatic search
Semi-automatic search
1 Press the CH+/- buttons or
PROGRAM NUMBER 0-9
button to choose desired channels
regard channel 1 as example
2 Press the TUNE menu button ,
till the TUNING menu shown on
the right display on the screen.
3 buttons to
Press the CH+/-
move cursor to " SEARCH".
1
AUTO
BG
TUNE
COLOUR AUTO
SOUND BG
BAND VHFL
SKIP OFF
PROGRAM 0
SEARCH
FINE TUNE
AUTO SEARCH
4 Press the VOL-/+ buttons to
start searching.
6
VOL- down button is used
for lower side program search.
VOL+ up button is used
SEARCH
VHFL
for higher side program search.
Repeat this step, till find the
desired channels.
If you want to eliminate MENU display immediately
In general, after you press the MENU button, menu
display (PICTURE, SOUND, TIME
EXCHANGE,
ETC.) will automatically disappear within 15
seconds. If you want to eliminate these contents
immediately, please press the EXIT button.
, FUNCTION, TUNE,
item
Page 9
Searching channel Continued
Manual fine tune
Manual fine tune
Under normal conditions, it is not needed to carry out the
following adjustments. However, if it is needed to carry out
adjustments under un-ideal receiving status, please use the
fine tune function to make adjustment for receiving the
optimal pictures.
1 Press the CH+/- button or
PROGRAM NUMBER 0-9
buttons to choose desired
channels regard channel 1 as
example
TUNE
2 Press the TUNE menu button ,
till the TUNING menu shown on
the right display on the screen.
3 buttons to
Press the CH+/-
move cursor to " FINE TUNE".
4 Press the VOL-/+ buttons all
by carrying out fine tune, till the
best picture and sound are
obtained, then loosen the
button.
TUNE
COLOUR AUTO
SOUND BG
BAND VHFL
SKIP OFF
PROGRAM 0
SEARCH
FINE TUNE
AUTO SEARCH
5
FINE TUNE
VHFL
Page 10
Searching channel Continued
Program skip
Program skip
After presetting, you can skip needless channels so that
you could choose the desired channels.
TUNE
1 Press the CH+/- buttons or
PROGRAM NUMBER 0-9
button to choose desired channels
1
AUTO
BG
regard channel 1 as example
2 Press the TUNE menu button,
till the TUNING menu shown on
the right display on the screen.
3 buttons to
Press the CH+/-
move cursor to "SKIP".
TUNE
COLOUR AUTO
SOUND BG
BAND VHFL
SKIP OFF
PROGRAM 0
SEARCH
FINE TUNE
AUTO SEARCH
4 Press the VOL-/+ buttons to
turn the SKIP function "ON".
5 Press the TUNE button to close
the menu. When you use the CH /
buttons to choose channel, this
channel will be skipped. However,
TUNE
COLOUR AUTO
SOUND BG
BAND VHFL
SKIP ON
PROGRAM 0
SEARCH
+-
FINE TUNE
AUTO SEARCH
you can still use the PROGRAM
NUMBER buttons to choose skipped
channel numbers.
If you want to recover the skipped channel
1 Use the PROGRAM NUMBER buttons to select the channel
number to be recovered.
2 Repeat those steps just now.
3 Press the VOL-/+ buttons to turn the SKIP function "OFF".
Page 11
Convenient picture and sound control functions
Multiple picture modes
P.STD
PICTURE
How to select picture mode
You can quickly select the desired picture mode from
four preset modes and one customized mode.
Press the P.STD button to select the
desired picture quality. Five kinds
of picture modes (i.e.,
"STANDARD",
"RICH", "USER","LISTEN",
STANDARD
RICH
USER
"SOFT" ) can be selected in turn.
LISTEN
SOFT
How to customize your own picture status
1 Press the PICTURE menu button , till the menu
shown on the right display on the screen.
2 Press the CH+/- buttons to
move cursor to the item to be
adjusted, then press the VOL-/+
buttons to obtain the desired
effect.
PICTURE
CONTRAST 48
BRIGHTNESS 32
COLOUR 48
SHARPNESS 40
*HUE 60
BLACK STRETCH OFF
PICTURE
ITEM
CONTRAST
BRIGHTNESS
COLOUR
SHARPNESS
*Hue
Note:
The "Hue" item only appears when the colour system is NTSC.
Press VOL-
Weak
Dark
Shallow
Soft
Lean to purple
Press VOL+
Strong
Bright
Deep
Sharp
Lean to green
Page 12
Convenient picture and sound control functions
Continued
Black stretch and noise reduce
PICTURE
FUNCTION
How to select BLACK STRETCH
1 Press the menu
button , till the menu
shown on the right display on the
screen.
Press the CH+/-
2 buttons to
move cursor to "BLACK
STRETCH".
3 Press the VOL-/+ buttons to
turn the BLACK STRETCH
function "ON" or "OFF".
PICTURE
PICTURE
PICTURE
CONTRAST 48
BRIGHTNESS 32
COLOUR 48
SHARPNESS 40
*HUE 60
BLACK STRETCH OFF
PICTURE
CONTRAST 48
BRIGHTNESS 32
COLOUR 48
SHARPNESS 40
*HUE 60
BLACK STRETCH ON
How to select NOISE REDUCE
1 Press the FUNCTION menu
button, till the menu
shown on the right display on the
screen.
Press the CH+/-
2 buttons to
move cursor to "NOISE
REDUCE".
3 Press the VOL-/+ buttons to
turn the NOISE REDUCE
function "ON" or "OFF".
FUNCTION
FUNCTION
ENGLISH
BACKGROUND ON
NOISE REDUCE ON
FADE ON
CHILDLOCK OFF
AVL ON
CALENDAR
FUNCTION
ENGLISH
BACKGROUND ON
NOISE REDUCE OFF
FADE ON
CHILDLOCK OFF
AVL ON
CALENDAR
Page 13
Convenient picture and sound control functions
Continued
Multiple audio modes
How to choose sound mode
S.STD
Press the S.STD button to select the
desired sound quality. Four kinds
of sound models (i.e.,
" ","USER" and "SPEECH")
MUSIC
can be selected in turn.
"THEATER",
THEATER
MUSIC
SPEECH
USER
SOUND
Mode
THEATER
MUSIC
USER
SPEECH
Suitable for rich and full music
Musical
You can set it by yourself
Speech
Sound quality
How to customize you own sound quality
1 Press the SOUND menu button ,
till the SOUND menu shown on
the right display on the screen.
2 Press the CH+/- buttons to
move cursor to the item to be
adjusted, then press the VOL-/+
buttons to obtain the desired
effect.
ITEM
VOLUME
BASS
TREBLE
BALANCE
Press VOL-
Weak
Weak
Weak
R down
SOUND
VOLUME 45
BASS 48
TREBLE 48
BALANCE 0
WOOFER OFF
WOOFER VOL 20
SURROUND ON
Press VOL+
Strong
Strong
Strong
L down
Page 14
Convenient picture and sound control functions
Continued
Surround/Woofer and mute functions
SOUND
How to use surround / woofer
1 Press the SOUND menu button , till the SOUND menu
shown on the right display on the screen.
2 Press the CH+/- buttons
select "SURROUND" /
"WOOFER", then press the
VOL-/+ buttons to turn the
SURROUND / WOOFER "ON".
3 Press the CH+/- buttons
select WOOFER VOL, then
press the VOL-/+ buttons to
obtain the desired effect.
SOUND
VOLUME 45
BASS 48
TREBLE 48
BALANCE 0
WOOFER OFF
WOOFER VOL 20
SURROUND ON
SOUND
VOLUME 45
BASS 48
TREBLE 48
BALANCE 0
WOOFER ON
WOOFER VOL 20
SURROUND ON
MUTE
How to eliminate sound
When you need to pay attention to surround sound,
or there is a telephone calling you or there are some
guests visiting you, the sound elimination (mute)
function is very convenient.
1 Press the MUTE button on the
remote control and "MUTE" type
face will display on the screen.
At this time, the sound of the TV
set is turned off.
2 If you want to recover sound,
press the MUTE button again or
directly press the VOL-/+ buttons.
MUTE
Page 15
Time functions
Clock setting and timer on/off functions
TIME
Clock setting
Check if the CLOCK time is identical to the standard time
of local time zone before setting the time. If not, adjusting
as follows:
TIME
1 Press the menu button,
TIME
and the TIME menu display on
the screen.
2Press the CH
+/- buttons to
move cursor to "CLOCK", then
press the VOL -/+ buttons to
adjust the time in hour position;
press again the CH+/- buttons
to select the time in minute
position, then press the VOL +/buttons to adjust the value of
minutes
.
On/off timer
Using on/off timer function, the
TV set can automatically turn on
to a preset program or shut
down in a preset time.
1 Press the TIME button
to call up the TIME menu on the
screen.
2 Press the CH+/- buttons to
move the cursor to "ON TIME",
then press the VOL -/+ buttons
to set the value in hour position;
press again the CH+/- buttons
to select the minute position and
set the value of the minute.(take
18:00 as an example)
menu
TIME
CLOCK 17:18
ON TIME 18:00
ON PROG 1
OFF TIME --:-SLEEP TIMER 0
REMIND TIME --:-REMIND PROG 1
TIME
CLOCK 17:18
ON TIME 18:00
ON PROG 1
OFF TIME --:-SLEEP TIMER 0
REMIND TIME --:-REMIND PROG 1
3 Press the CH+/- buttons to
move the cursor to "ON PROG",
then press the VOL-/+buttons or
program direct number buttons
to set your desired channel
(take 8 as an example).
4 Repeat step 1-2 to turn OFF
TIME.(take 23:00 as an example)
TIME
CLOCK 17:18
ON TIME 18:00
ON PROG 8
OFF TIME 23:00
SLEEP TIMER 0
REMIND TIME --:-REMIND PROG 1
Page 16
Time functions
continued
Sleep timer and program preset
Sleep timer
The TV set have 18 sections
for sleep timer function
TIME
option
(each section has a time
interval of 10 minutes)
chart):
1 Press the TIME button,
and the TIME menu display on
the screen.
2 Press the CH +/- buttons to
move cursor to "SLEEP
TIMER".
3 press the VOL -/+ buttons to
set the value of the SLEEP
TIMER.
REMIND PROG function
With REMIND PROG function, the TV set can
automatically change a preset program in a preset time .
menu
(See right
0
10
20
170
180
TIME
CLOCK 17:18
ON TIME 18:00
ON PROG 8
OFF TIME 23:00
SLEEP TIMER 120
REMIND TIME --:-REMIND PROG 1
TIME
1 Press the TIME button
menu
to call up the TIME menu on the
screen.
2 Press the CH +/- buttons to
move the cursor to "REMIND
TIME", then press the VOL -/+
buttons to set the value in hour
position; press again the CH+/buttons to select the minute
position, and then set the value
of the minute.(take 19:00 as an
example)
3 Press the CH+/- buttons to
move the cursor to "REMIND
PROG", then press the VOL -/+
buttons or program direct
number buttons to set the
Desired channel (take 18 as an
example).
NOTE:
take effect
is on status .
The REMIND PROG can not
when child lock function
TIME
CLOCK 17:18
ON TIME 18:00
ON PROG 8
OFF TIME 23:00
SLEEP TIMER 120
REMIND TIME 19:00
REMIND PROG 1
TIME
CLOCK 17:18
ON TIME 18:00
ON PROG 8
OFF TIME 23:00
SLEEP TIMER 120
REMIND TIME 19:00
REMIND PROG 18
Page 17
Set up functions
Screen saver and child lock functions
How to start screen saver function
FUNCTION
FUNCTION
When the BACKGROUD
function is ON, the screen
NO SIGNAL
will turn automatically as
shown "NO SIGNAL" of
moving ( black background).
1 Press the FUNCTION menu
button till the menu
,
FUNCTION
shown on the right display on the
screen.
2 Press the CH+/-
buttons to move
cursor to "BACKGROUND" and
press the VOL-/+ buttons to turn the
BACKGROUND function "ON"
Child lock function
1 Press the FUNCTION menu button till the
FUNCTION
ENGLISH
BACKGROUND ON
NOISE REDUCE ON
FADE ON
CHILD LOCK OFF
AVL ON
CALENDAR
.
,
FUNCTION
menu shown on the right display on the screen.
.
to move
FUNCTION
ENGLISH
BACKGROUND ON
NOISE REDUCE ON
FADE ON
CHILD LOCK OFF
AVL ON
CALENDAR
2 Press the CH+/- buttons
cursor to "CHILD LOCK" and press
the VOL-/+ buttons to turn CHILD
LOCK function "ON"
LOCK
NOTE:
The menu local buttons can not work
1. when child lock
function is on status .
2.
You can also set the child lock function by pressing the
LOCK menu button on remote control repeatedly .
3.The "CHILD LOCK" become green on the screen when
the child lock is "ON" status ; the "CHILD LOCK" become
red when the child lock is "OFF" status.
Page 18
Set up function
s Continued
AVL and calendar functions
AVL function
1 Press the FUNCTION menu
button till the FUNCTION
FUNCTION
,
menu shown on the right
display on the screen.
2 Press the CH+/-
cursor to "AVL"
3 Press the
the AVL function "ON" or "OFF"
buttons to move
.
VOL-/+ buttons to turn
.
FUNCTION
ENGLISH
BACKGROUND ON
NOISE REDUCE ON
FADE ON
CHILD LOCK OFF
AVL ON
CALENDAR
FUNCTION
ENGLISH
BACKGROUND ON
NOISE REDUCE ON
FADE ON
CHILD LOCK OFF
AVL ON
CALENDAR
FUNCTION
Calendar function
1 Press the FUNCTION menu
button till the menu
,
shown on the right display on the
screen.
2 Press the CH+/-
cursor to the "CALENDAR" , then
press the VOL-/+ buttons to the
CALENDAR display on the screen.
3 Press the CH-/+ buttons to turn
YEAR/MONTH/DAY, press the
VOL-/+ buttons to set or adjust
YEAR/MONTH/DAY.
FUNCTION
buttons to move
FUNCTION
ENGLISH
BACKGROUND ON
NOISE REDUCE ON
FADE ON
CHILD LOCK OFF
AVL ON
CALENDAR
Page 19
Set up functions
Continued
Switch on/off modes and select a language
Switch on/off modes
1 Press the FUNCTION menu
FUNCTION
button till the menu
,
shown on the right display
on the screen.
2 Press the CH +/- buttons to
move cursor to "FADE”.
FUNCTION
FUNCTION
ENGLISH
BACKGROUND ON
NOISE REDUCE ON
FADE ON
CHILD LOCK OFF
AVL ON
CALENDAR
3 Press the
the function "ON" or "OFF"
VOL-/+ buttons to turn
FADE
AVL
.
Select a language
1 Press the FUNCTION menu
button till the menu
,
shown on the right display on
the screen.
2 Press the CH+/-
cursor to " " . AVL
3 press the VOL+/- buttons to select
the desired language. Then all the
items will be displayed in the selected
language.
FUNCTION
buttons to move
FUNCTION
ENGLISH
BACKGROUND ON
NOISE REDUCE ON
FADE ON
CHILD LOCK OFF
AVL ON
CALENDAR
FUNCTION
ENGLISH
BACKGROUND ON
NOISE REDUCE ON
FADE ON
CHILD LOCK OFF
AVL ON
CALENDAR
Page 20
Position exchange function
Exchange
Exchange
Through this function, you can easily change any of the
channel numbers.
If you want to change the channel number of 6 to 9, you can
simply do the following:
1 Press the MENU button 6
times (again) till the
EXCHANGE menu display on
the screen.
2 Press the VOL+/- buttons or
PROGRAM NUMBER 0-9
buttons to set PROGRAM 1 TO 6.
3 buttons to move
Press the CH+/-
cursor to " PROGRAM 2".
4 Press the VOL+/- buttons or
PROGRAM NUMBER 0-9
button to set PROGRAM 2 TO 9.
,
EXCHANGE
PROGRAM 1 6
PROGRAM 2 2
EXCHANGE
EXCHANGE
PROGRAM 1 6
PROGRAM 2 9
EXCHANGE
5 buttons to
Press the CH+/-
move cursor to "EXCHANGE".
6 Press the VOL-/+ buttons to turn
the "EXCHANGE".
OCT
EXCHANGE
PROGRAM 1 6
PROGRAM 2 9
EXCHANGE
Page 21
Connecting the TV set to the other video and audio equipments
Connecting to the other video and audio equipments
You can connect a stereo to the AUDIO output terminals on the TV set to enjoy sounds of
higher quality. VIDEO and AUDIO output terminals output the video and audio signals being
monitored by the TV set. The electric levels of video and audio output signals are fixed.
To outside input
To video/audio input
DVD, VCD and other reproducing equipments
Page 22
Troubleshooting
If the TV set has breakdown, please check according to the following list.
Item
No power supply
No sound
Bad colour/ hue
Colour spot
Scramble
Double or triple
image
Snowy picture
The remote
control
do not work
Checking
If power line is connected?
Whether sound mute is used?
Whether the adjustments of contrast, colour and hue are suitable?
If the position of the TV set is changed during its work, the colour
shadow may appear.
If this case occurs, please switch off the power supply for TV set
and let it cool for about 30 minutes, then switch on the power
supply again.
If there are disturbances from automobile, motorcycle, electric car,
fluorescence lamp, blower etc?
If there are disturbances from the other TV set, PC, game machine and
wireless broadcasting station?
Whether there is any reflection of broadcasting signal from mountain or building?
Whether the antenna position is changed or not?
Whether the antenna connection is disconnected or fallen off?
Whether the antenna position is changed or not?
Whether the batteries in the remote control unit are used up or not?
Whether the installation of the batteries is correct or not?
Whether there is any barrier between the remote control and the infrared receiver?
Whether the infrared receiver is influenced by strong light?
Whether the main power supply is connected?
The cases shown below are not breakdowns:
Snapping sound from the
cabinet of the TV set
Uneven colour sometimes
appearing on a part of
the screen
If the breakdown can't be cleared after you doing by above steps,
e
t
N
o
please get in touch with the local cent r of service and don't open
the back cover yourself.
The snapping sound is caused by the telescoping of the
cabinet due to the temperature changing. It is normal,
please use it reassuringly.
This kind of uneven colour may be caused by bright picture
setting.
Even colour can be recovered by decreasing contrast.
e
Page 23
Specifications
Model
Colour system
Sound system
Display tube
Sound output power
Power supply
Power consumption
Size mm
Supplied
accessories
PAL, SECAMBG, AV NTSC
DK,
34" CRT
5W+5W & 5W
AC 160-250V 50/60 Hz
180W
960 width x715 height x580 depth
Remote control X1
Owner's manual X2
Battery(AA) X2
34T9B-T
The design and specifications may be changed without notice.
Page 24
Loading...