Haier 29T9D-T User Manual

29T9D

COLOUR TELEVISION RECEIVER

OWNER'S MANUAL

Please read this manual carefully before using this TV set and keep it for future reference.

CONTENTS

Before Operation

Warning and cautions...........................................................................2

Installation..............................................................................................3

Aerial connection...................................................................................3

Preparation of the remote control unit...................................................3

Function buttons and external sockets...............................................4

Front and side panel of the TV set........................................................4

Rear panel of the TV set.......................................................................4

Buttons on the remote control.............................................................5

Basic operation

Switching on/off the TV set...................................................................6

Watching TV program............................................................................7

Watching TV program..........................................................................7

Program swap and auto scan functions...............................................8

Searching channel.................................................................................9

Full automatic search mode.................................................................9

Semi-automatic search......................................................................10

Manual fine tune.................................................................................11

Program skip .....................................................................................12

Convenient picture and sound control functions............................

Multiple picture modes .....................................................................13

Black stretch and noise reduce..........................................................14

Multiple audio modes.......................................................................15

Surround and mute functions.............................................................16

Time functions.....................................................................................17

Clock setting and timer on/off functions..........................................17

Sleep timer and program preset .....................................................18

Setup function ...................................................................................19

Screen saver and child lock functions...............................................19

AVL and calendar functions...............................................................20

Fade and select language.................................................................21

Position exchange function...............................................................22

TELETEXT............................................................................................23

Teletext..............................................................................................23

Others

Connection to the external audio and video equipment..................25

Troubleshooting guide

Specifications......................................................................................27

........................................................................26

Warning and cautions

1. When you clean the TV set, please pull out the power plug from AC outlet. Don't clean the cabinet and the screen with benzene, petrol and other chemicals.

2. In order to prolong the using life of the TV set, please place it in a well ventilated location.

3. Don't place the TV set in direct sunlight or near a heat source.

4. Do not place the TV set near rain or moisture as it may cause an electric shock, or the TV set to catch fire. The TV set must only be used in dry in door locations.

5. The back cover must only be removed by a registered electrical service person. Removing the back cover may result in electric shock, fire or damage to the TV set.

6. If the TV set is not going to be used for a long time, or there is a severe thunder & Lighting storm, it is recommended that the TV set be disconnected from the AC power outlet and the aerial plug removed.

Explanation on the display tube

Should the picture tube require cleaning, disconnect the power and use a dry soft cotton cloth. Do not use any cleaner or abrasive cloths.

Installation

Aerial connection

For an optimum high quality picture, it is strongly advised that the TV set connect to an external aerial(s) using high quality coax cable. When connecting to HiFi VCRs, satellite (or cable) set top boxes, that the AV terminals are used to allow the stereo sound to be transferred.

300 twin-lead cable

Antenna adapter

Mixer

75 coaxial cable

Plug

Preparation of the remote control unit

Battery installation

Take off the battery compartment cover. Place two AA batteries, make sure that battery polarity matches with the +/- mark inside the battery compartment.

Operation notes for the remote control unit

Under normal conditions, the life time of batteries is one year. If you don't intend to use the unit for a long period or the electricity of the batteries is used up, remove the batteries to prevent batteries acid from leaking into the battery compartment.

Never place batteries in a fire.

Avoid dropping the remote control and/or getting it wet.

Function buttons and external sockets

Front and side panel of the TV set

Side-set terminals

Right sound track

Left sound track

Video1 input terminal

S terminal

TV/Video (input selector

Volume up/ down

Channel selector

Infrared sensor window

Power indicator

Power switch

Rear panel of the TV set

Antenna input

SCART 1

The TV has 2 external sockets situated at the back of the set (EXT1 and EXT2). The EXT1 socket has audio and video inputs/ outputs. The EXT2 socket has audio and video inputs.

*Connect either the S-terminal input terminal, VIDEO input terminal or the external socket, whichever is used. Do not connect both of these terminals.

SCART 2

If you want to connect the TV set to the other audio/video equipment, please refer to P25.

Buttons on the remote control

Buttons and Descriptions

MUTE

SCAN

SWAP

Program scan Button

ZOOM

CALL

EXIT

CH+

CH-

PICTURE SOUND

FUNCTIONTIME

TV/AV

S.STDP.STD

VOL+VOL-

Mute Button Press to conceal the sound of programs.

Zoom function

Screen Display Button Program number Button Digital selector

Picture mode selection

Menu Select/ Adjust Button Use this button to adjust the menu, the volume and the channels

Teletext Button Picture menu (Red) Time menu (Yellow) Tune menu (White)

Teletext

Function menu Sound menu

Sound mode selection

Mono/stereo

Exit screen display

TV and AV Exchange Button To exchanger between TV and other available video inputs

Stand by Button

Swap function Button

TUNE

Switching on/ off the TV set

In the following, the methods of using power switch and remote controller to switch on/off power supply for the TV set will be explained.

Switching on/ off the TV set

1 Please press the power switch to switch on AC

power supply and the power indicator will light.

2 If the indicator is lighting in red, press the button

on the remote control again.

Note

1 When you don't operate the TV set with a

remote control, you can turn on it directly

through pressing the P / on the TV set

(Child Lock must be turned off).

+ - buttons

4 AUTO BG

2 If you want to exchange to standby status,

please press down the button on the remote

control.

3 If you want to fully switch off the power supply

for the TV set, please press the power switch

button on the TV set.

Auto switch-off function

When the "BACKGROUND" function is on, if an empty channel is selected or the TV programs are ended for the day, the power will be switched off 5 minutes later automatically. If the "OFF TIME" is on, it will be switched off according to the presetting time. The auto power off function does not work under video input or when the background is off. (Note: If the "OFF TIME" is less than 5 minutes, it will be switched off automatically to the preset Time. )

Watching TV

You can watch TV program in a preset channel.

Watching TV program

How to select TV program

Select the desired program

1 Using "Program number" buttons

Directly enter the channel number with the numeric keypad on the remote control. To select channel numbers from 10 ~ 99 press [-/--] button and enter the two digit channel number To select channel numbers from 100 ~ 218 press [-/--] button twice and enter the 3 digit channel number

2 Using the CH+/- buttons

Press the CH+ button to select a channel number in number

CH+

VOL- VOL+

CH-

increasing

Press the CH- button to select a channel number in number

decreasing

Select the desired sound

Press the VOL-/+ buttons on the remote or the front of the TV set to adjust the volume level. The range is 0~99. When the volume buttons are pressed the volume level is displayed automatically on the TV screen.

direction.

TUNE

CH+

VOL- VOL+

CH-

If the colour or sound of a channel is abnormal

Usually this should be set in the Auto position. However if the colours displayed on the screen are incorrect you can manually select the correct colour system. When finish remember to turn it back to auto again so that other programs will still work correctly. To select the colour change option press the TUNE button on the remote control.

TUNE

COLOUR AUTO

BAND VHFL SKIP OFF PROGRAM 0 SEARCH FINE TUNE AUTO SEARCH

If picture colo r is abnormalu

Use the CH+/- buttons to select Colour then the VOL-/+

buttons to change between Auto,

NTSC443

. Press the EXIT button to save the setting.

PAL, NTSC, SECAM and

If the picture sound is abnormal

Use the CH+/- buttons to select Sound then press the

VOL-/+ buttons to select the sound system.

SOUND BG

Watching TV continued

Swap function enables quick swap to the last watched program. Auto scan function enables automatic successive scanning of all the programs in memory with (each channel will last about 2 seconds)."OFF" skip status

Program swap and auto scan functions

Program swap

Suppose the channel number

SWAP

1 you used just now is 8 and the channel number you are using is 18 (as shown in the figure).

2 If you want to return to the last watched program channel 8, you can simply press the SWAP button.

3 If you want to return to channel 18, press the button again. Through this function, you can easily change between the channel you are using and the channel you used last time.

18 AUTO BG

8 AUTO BG

18 AUTO BG

SCAN

Auto program scan

1 If you want to select a desirable program, you may scan all the TV programs in memory. You can simply press the SCAN button to do this. The program numbers will appear one after another from beginning to end (each channel number will last about 2 seconds).

2 If you want to stop the function during auto scanning, simply press the SCAN button again.

3 AUTO BG SCAN

1 AUTO BG SCAN

2 AUTO BG SCAN

+ 20 hidden pages