Haier 29F9D, 29T9D-P, 29T9D, 29F9D-P User Manual

COLOR TV RECEIVER

OWNER'S MANUAL

Please READ this manual carefully before operating the unit, and keep it for future reference.

The Owner`s Manual for the Follow Models:

29F9D-P, 29T9D-P,29F9D,29T9D

*Please read this manual carefully before using your television and keep this manual in a good place for future reference.

CONTENTS

Before Operation

Warning and cautions............................................................................2

Installation...............................................................................................3

Aerial connection...................................................................................3

Preparation of the remote control unit...................................................3

Function buttons and external sockets................................................4

Front panel of the TV set........................................................................4

Rear panel of the TV set........................................................................4

Buttons on the remote control..............................................................5

Basic operation

Switching on/off the TV set....................................................................6

Watching TV program.............................................................................7

Watching TV program...........................................................................7

Program swap and auto scan functions................................................8

Searching channel..................................................................................9

Full automatic search mode..................................................................9

Semi-automatic search.......................................................................10

Manual fine tune..................................................................................11

Program skip ......................................................................................12

Convenient picture and sound control functions.............................

Multiple picture modes ......................................................................13

Black stretch and noise reduce...........................................................14

Mute function......................................................................................15

Time functions......................................................................................16

Clock setting and timer on/off functions...........................................16

Sleep timer and program preset ......................................................17

Setup function ....................................................................................18

Screen saver and child lock functions................................................18

AVL and calendar functions................................................................19

Fade and select language..................................................................20

Position exchange function.................................................................21

Others

Connection to the external audio and video equipment..................22

Troubleshooting guide

Specifications.......................................................................................24

.........................................................................23

Warning and cautions

1. When you clean the TV set, please pull out the power plug from AC outlet. Don't clean the cabinet and the screen with benzene, petrol and other chemicals.

2. In order to prolong the using life of the TV set, please place it in a well ventilated location.

3. Don't place the TV set in direct sunlight or near a heat source.

4. Do not place the TV set near rain or

moisture as it may cause an electric shock, or the TV set to catch fire. The TV set must only be used in dry in door locations.

5. The back cover must only be

removed by a registered electrical service person. Removing the back cover may result in electric shock, fire or damage to the TV set.

6. If the TV set is not going to be used

for a long time, or there is a severe thunder & Lighting storm, it is recommended that the TV set be disconnected from the AC power outlet and the aerial plug removed.

Explanation on the display tube

In general, it is not needed to clean the tube surface. However, necessary, it's surface can be cleaned with a dry cotton cloth after cutting off the power. Don't use any cleanser. If using hard cloth, the tube surface will be damaged.

Installation

Aerial connection

Generally speaking, to enjoy a clearer picture, we recommend that you use a CATV system or an outdoor antenna .In different places, the suitable antenna type and position are different.

300 twin-lead cable

Antenna adapter (additional purchase)

Mixer

additional

purchase

75 coaxial cable

Antenna input

Plug (additional purchase)

AC power socket

75 standard

coaxial type

Note

* It is recommended that you'd better use 75

disturbance caused by airwave.

* Don't bind antenna cable and power wire together.

coaxial cable to remove the

Preparation of the remote control unit

Battery installation

Take off the battery compartment cover. Place two AAA batteries, make sure that battery polarity matches with the +/- mark inside the battery compartment.

Operation notes for the remote control unit

Under normal conditions, the life time of batteries is one year. If you don't intend to use the unit for a long period or the electricity of the batteries is used up, remove the batteries to prevent batteries acid from leaking into the battery compartment. Don't throw your batteries into a fire. Dispose of your batteries with a specified method. Avoid the falling and the wetting of the remote control unit.

Function buttons and external sockets

Front and side panel of the TV set

Side-set terminals

Video1 input terminal

Left sound track

Right sound track

Volume up/ down

TV/Video (input selector

Channel selector

Rear panel of the TV set

Video output terminals: VIDEO AUDIO L, R

Video 2 input terminals: VIDEO AUDIO L, R

DVD input terminals: Y, Cb, Cr AUDIO L, R

If you want to connect the TV set to the other audio/video equipment, please refer to P22.

Infrared sensor window

Power indicator

Antenna input

S-VIDEO

S-VIDEO input terminal

Power switch

Buttons on the remote control

MUTE POWER

CALL

TV/AV

SWAP

1 2 3

4 5 6

7 8 9

SCAN

P.STD

CH+

VOL

PICTURE

CH-

TUNE

-/--

TIME

FUNCTION

VOL +

EXIT

Mute Button

Press to conceal the sound of programs.

Stand by Button

Screen Display Button

Swap function Button

TV and AV Exchange Button

To exchanger between TV and

other available video inputs

Digital selector

Program number Button

Program scan Button

Time menu

Picture mode selection

Function menu

Menu Select/ Adjust Button

Use this button to adjust the menu,

the volume and the channels.

Tune menu

Picture menu

Exit screen display

Buttons and Descriptions

Switching on/ off the TV set

In the following, the methods of using power switch and remote controller to switch on/off power supply for the TV set will be explained.

Switching on/ off the TV set

1 Please press the power switch to switch on AC

power supply and the power indicator will light.

2 If the indicator is lighting in red, press the POWER

button on the remote control again.

Note

1 When you don't operate the TV set with a

remote control, you can turn on it directly

through pressing the P / on the TV set

(Child Lock must be turned off).

+ - buttons

4 AUTO BG

POWER

2 If you want to exchange to standby status,

please press down the POWER button on the

remote control.

3 If you want to fully switch off the power supply

for the TV set, please press the power switch

button on the TV set.

Auto switch-off function

When the "Back" function is on, if an empty channel is selected or the TV programs are ended for the day, the power will be switched off 5 minutes later automatically. If the "OFF TIME" is on, it will be switched off according to the presetting time. The auto power off function does not work under video input or when the background is off. (Note: If the "off timer" is less than 5 minutes, it will be switched off automatically to the preset Time. )

Watching TV

You can watch TV program in a preset channel.

Watching TV program

How to select TV program

Select the desired program

1 2 3

4 5 6

7 8 9

CH+

VOL

CH-

VOL +

1 Using "Program number" buttons

Directly enter the channel number with the numeric keypad on the remote control. To select channel numbers from 10 ~ 99 press [-/--] button and enter the two digit channel number To select channel numbers from 100 ~ 218 press [-/--] button twice and enter the 3 digit channel number

2 Using the CH+/- buttons

Press the CH+ button to select a channel number in number

increasing

Press the CH- button to select a channel number in number

decreasing

direction.

Select the desired sound

Press the VOL-/+ buttons on the remote or the front of the

TV set to adjust the volume level. The range is 0~99. When the volume buttons are pressed the volume level is displayed automatically on the TV screen.

VOL

TUNE

CH+

CH-

VOL +

If the colour or sound of a channel is abnormal

The settings of the colo r

system or the sound system

may be wrong.

Press the TUNE button and

setting menu shown on the

right will display on the screen.

TUNE

COLOUR AUTO

SOUND BG BAND VHFL SKIP OFF PROGRAM 0 SEARCH FINE TUNE AUTO SEARCH

If picture colo r is abnormalu

Use the CH+/- buttons to select Colour then the

VOL-/+ buttons to change between Auto,

SECAM and NTSC443

. Press the EXIT button to save

PAL, NTSC,

the setting.

If the picture sound is abnormal

Use the CH+/- buttons to select Sound then press the

VOL-/+ buttons to select the sound system.

+ 18 hidden pages