Gam e con tro l but ton s and meth od of p lay ing t he ga me..................................................26
Technical operation
Con nectin g Add iti ona l Equip men ts .........................................................................................27
Others
Tro ubl esh oot ing ........................................................................................................................2 8
Spe cif ica tio ns ............................................................................................................................29
21
Warning and Cautions
1. When you clean the TV set, please
pull out the power plug from AC outlet.
Don't clean the cabinet and the
screen with benzene, petrol and other
chemicals.
2. In order to prolong the using life of
the TV set, please place it on a
ventilated place.
3. Don't place the
TV set in the
sunshine or near
heat source.
4. To prevent the TV set from firing
and electric shock, don't expose the
TV set to rain or moisture.
5. Don't open the back cover,
otherwise it is possible to damage the
components in the TV set and harm
you.
6. When the TV set isn't going to be
used for long time or it is in thunder
and lightening, please pull out the
plug from AC outlet and the antenna
plug from the cover of the TV set.
Explanation on the display tube
In general, it is not needed to clean the tube surface. However, necessary,
it's surface can be cleaned with a dry cotton cloth after cutting off the power.
Don't use any cleanser. If using hard cloth, the tube surface will be damaged.
Installation
Antenna connection
Generally speaking, to enjoy a clearer picture, we recommend that you use a CATV
system or an outdoor antenna .In different places, the suitable antenna type and position
are different.
300 twin-lead cable
Antenna adapter
75 coaxial cable
Plug
(additional purchase)
Note
* It is recommended that you'd better use 75
coaxial cable to remove the
disturbance caused by airwave.
* Don't bind antenna cable and electric wire together.
Preparation for the remote control
Battery installation
Remove the batteries cover.
Insert two size AAA batteries matching
the +/-polarities of the battery to the +/marks inside the battery compartment.
Tips for remote operation
The battery life should be about one year
under normal use.
If the remote control will not be used for a
long period of time or when the batteries are
worn out, remove the batteries to prevent
leakage.
Do not throw the batteries into fire.
Dispose of used batteries in the specified
manner.
Do not drop, dampen or disassemble the
remote control.
Mixer
additional
purchase
Antenna input
75 standard
coaxial type
AC power socket
Position of Keys and Plug-ins
Front and side panel
29FA18-T
29MT1:
Audio Input
terminal
Video Input
terminal
AUDIO
VIDEO
R
Audio Input
terminal
L
Video Input
terminal
NOTE: The side AV terminals are only available for some model.
Position of Keys and Plug-ins
Video Y input terminal
Video Cb input terminal
Video input terminal
S-VIDEO input terminal
Video output terminal
Antenna input socket
Video Cr input terminal
Audio right channel input terminal
Audio left channel input terminal
Audio right channel output terminal
Audio left channel output terminal
Using the Remote Control
Buttons and Descriptions
Mute Button
Press to conceal the sound of programs.
Sleep Timer Button
TV and AV Exchange Button
To exchange between TV and
Picture Mode Select Button
There are DYNAMIC, STANDARD,
MILD,MEMORY, PICTURE MUTEand
COLOR MUTE six modes of picture.
Menu Select/ Adjust Button
Use this button to adjust the menu,
the volume and the channels, as well
as to control the game.
System Adjust Button
Program Scan Button
Calendar
Favorite program button
No available
Start/Restart Game Button
Game Exit Button
Saving mode on/off button
Lock Setting button
Sound Mode Select Button
Program Play-backward Button
Digit Select Button
Change the channel position number
between one digit, two-digit and three
-digit.
Screen Display Button
DC Standby Button
TV/AV
PRE
P.STD
VOL-
SYSTEM
CALENDAR
TDX
CH+
MENU
CH-
SCAN
FAVORITE
GAME
DISP
BACK
S.STD
VOL+
LOCK
QSET
EXIT
NOTE: Just see your real set and the instructions on the manual for references.
Power On and Power Off
11-14
Viewing TV Programs
The channels amount to 218 .
Viewing TV programs
How to select the TV program
1. Use the direct-digit choosing button
Press the button from 0-9 to select a one digit channel.
If you want to select a two-digit channel, press the
Digit Select button and change it into two-digit mode,
then press the number of the channel.
If you want to select a three-digit channel, press the
Digit Select button and change it into three-digits mode,
then press the number of the channel.
Direct-digit Choosing
button
PRE
Digit Select
button
BACK
If the channel position number you select is larger than 218,
the TV will use the first two number as the channel position.
2. Use CH+/- button
Press CH+ to increase the channel position number.
Press CH- to decrease the channel position number.
3. Use PRE button and BACK button
Press PRE button, you can go back to the channels you
viewed (as many as four).
Then, press BACK button, you can return to the channels you
were watching just now (as many as four) .
For example, if you have viewed channel 1,2,3,4,5,6 after the
TV is powered on, and the channel you are watching now is
number 7, then press PRE button, you can view channel 6,5,
4,3, and you may press the Back button to return to channel 7.
VOL-
SYSTEM
CH+
MENU
CH-
VOL+
Choose the proper volume you like
Press VOL+/- button to adjust the volume.
VOLUME
If the color of one channel is abnormal
It might be because the color has been
set improperly.You may follow the
instruction below to adjust it. Press
SYSTEM button, and you can see
the form.
If the color of the picture is abnormal
Press CH+/- button, and move the indicator to COLOR,
and press VOL+/- button to select the proper color(AUTO,
NTSC3.58,NTSC4.43 and PAL will appear alternately).
Generally, please set to AUTO.
If the sound is abnormal
Press CH+/- button, and move the indicator to SOUND,
and press VOL+/- button to select the proper sound.
(If there is only one sound system for your country, the sound
system may not be adjust)
Viewing TV Programs(continued)
Program scanning function is to let the television automatically scan all
preconcerted channel program(about two seconds per channel).
Program scan and screen display
½ÚÄ¿ä¯ÀÀ¼°ÆÁÄ»ÏÔʾ¹¦ÄÜ
Program scanning function
1. If you want to scan the programs
and select your favorite channel ,
just press the SCAN button, then
SCAN
the television will start scanning
from the present channel with a
rate of two seconds per channel
and until all the preconcerted
programs have been displayed
once, the TV set will return to the
starting channel.
2. If you want to terminate this
function during the scanning, press
the SCAN button again, and the
program will stay at the present channel.
DISP
Screen display
Usually, when you press the DISP button, the channel
number will appear on the top right corner of the screen
and press it twice, the count time will also appear
on the screen.
Loading...
+ 21 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.