Haier 29FV6NW Operating Instructions Manual

COLOUR TELEVISION

OPERATING

INSTRUCTIONS

◆Stage curtain for open and close effect

◆218 programs stored

◆Multi-picture modes and sound modes selection

◆On/Off timer

◆Child lock

◆Soft exchange

◆Appointment

◆DVD component input

◆Surround sound

01
00905

29FV6NW29FV6NW

COLOUR TELEVISION

OPERATING

INSTRUCTIONS

◆Stage curtain for open and close effect

◆218 programs stored

◆Multi-picture modes and sound modes selection

◆On/Off timer

◆Child lock

◆Soft exchange

◆Appointment

◆DVD component input

◆Surround sound

01
1469

WARNING AND CAUTIONS

1. When you clean the TV set, please pull
out the power plug from AC outlet.
Or may result in electric shock, fire or
damage to the TV set. Don't clean the
cabinet and the screen with benzene,
petrol and other chemicals.

4. Do not place the TV set near rain
or moisture as it may cause an electric
shock, or the TV set to catch fire. The TV
set must only be used
in dry indoor location.

2. In order to prolong the using life of the
TV set, please place it at a well ventilated
location.

5. The back cover must only be removed
by a registered electrical service person.
Removing the back cover may result in
electric shock, fire or damage to
the TV set.

3. Don't place the TV
set in direct sunlight
or near heat source.

6. If the TV set is not going to be used for
a long time, or there is a severe thunder &
lightening storm, it is recommended that
the TV set be disconnected from the AC
pow er out let and t he aer ial plug

Explanation on the display tube

When the picture tube requires cleaning, please disconnect the power and use a
dry soft cotton cloth. Do not use any cleaner or abrasive cloth.

1

CONTENTS

Warning and cautions................................................................................................1

Basic feature..............................................................................................................2

Technical specification..............................................................................................2

Preparing for operations............................................................................................3

Function buttons and external sockets......................................................................4

AV connections........................................................................................................5

Remote controller guide...........................................................................................6

Power supply............................................................................................................7

Tuning procedure.....................................................................................................7

Picture and audio adjustment function ..................................................................11

Time function.........................................................................................................14

Setting function .....................................................................................................17

Game......................................................................................................................22

Trouble shooting guide..........................................................................................23

WARNING AND CAUTIONS

1. When you clean the TV set, please pull
out the power plug from AC outlet.
Or may result in electric shock, fire or
damage to the TV set. Don't clean the
cabinet and the screen with benzene,
petrol and other chemicals.

4. Do not place the TV set near rain
or moisture as it may cause an electric
shock, or the TV set to catch fire. The TV
set must only be used
in dry indoor location.

2. In order to prolong the using life of the
TV set, please place it at a well ventilated
location.

5. The back cover must only be removed
by a registered electrical service person.
Removing the back cover may result in
electric shock, fire or damage to
the TV set.

3. Don't place the TV
set in direct sunlight
or near heat source.

6. If the TV set is not going to be used for
a long time, or there is a severe thunder &
lightening storm, it is recommended that
the TV set be disconnected from the AC
pow er out let and t he aer ial plug

Explanation on the display tube

When the picture tube requires cleaning, please disconnect the power and use a
dry soft cotton cloth. Do not use any cleaner or abrasive cloth.

1

CONTENTS

Warning and cautions................................................................................................1

Basic feature..............................................................................................................2

Technical specification..............................................................................................2

Preparing for operations............................................................................................3

Function buttons and external sockets......................................................................4

AV connections........................................................................................................5

Remote controller guide...........................................................................................6

Power supply............................................................................................................7

Tuning procedure.....................................................................................................7

Picture and audio adjustment function ..................................................................11

Time function.........................................................................................................14

Setting function .....................................................................................................17

Game......................................................................................................................22

Trouble shooting guide..........................................................................................23

R

VIDEO

AUDIO

L

BASIC FEATURE

TECHNICAL SPECIFICATION

1.CRT: 29"

2.COLOUR SYSTEM: PAL N TSC4.43/3.58(AV)

3.AUDIO SYSTEM: BG

4.POWER SUPPLY: See rating plate

5.POWER CONSUMPTION: See rating plate

6.ANTENNA INPUT IMPEDANCE : 75Ω

7.SOUND OUTPUT POWER: 8W+8W

8.NET WEIGHT(Kg): 49.5

9.NET DIMENSION (mm): 762 × 506× 612

Supplied accessories:
Infrared remote control handset 1
Battery(AA) 2
Operating instruction 1
Design and specifications are subject to change without notice.

2

◆Stage curtain for open and close effect

◆218 programs stored

◆Multi-picture modes and sound modes selection

◆On/Off timer

◆Child lock

◆Soft exchange

◆Appointment

◆DVD component input

◆Surround sound

Figure A Figure B

Antenna cable
with a plug

Figure C Figure D

Antenna feeder

Antenna adapter

75-300Ω

Coaxial cable(75Ω) twin-lead cable(300Ω)

Antenna connection
Connect an antenna to the antenna socket on
the TV set, we recommend using a Cable TV
system for better picture and audio quality.

1.If you use a coaxial cable(75Ω),insert the
antenna plug (see figure C) into 75Ωsocket
(see figure A).

2.If you use a twin-lead cable(300Ω),please
shape the cable as figure D, and connect the
leads to antenna adapter and then insert the
antenna adapter into the 75Ωsocket(see
figure B).

Power source wire connection
Insert the power plug into AC outlet.
Install and replace batteries of the
remote control unit:

1.Place the remote control unit with the face
down, then open the battery cover of the
unit.

2.Place the two"AA"size batteries, matching
the + and - signs on each battery to the +
and -signs of the battery compartment.

3.Close the cover of the battery compartment.
NOTE:
(1)Don't drop or wet or dismantle the unit.
(2)If you don't intend to use the unit for a
long period or the electricity of the
batteries is used up, remove the batteries
to prevent batteries acid from leaking
into the battery compartment.
(3)Replace the two old batteries at the
same time.
(4)Don't use charge battery (Ni-cd )and
don't mix battery type.
(5)Don't throw your batteries into a fire.
Dispose of your batteries in a required
place.

PREPARING FOR OPERATIONS

3

Antenna

R

VIDEO

AUDIO

L

R

VIDEO

AUDIO

L

AV CONNECTIONS

5

FUNCTION BUTTONS AND EXTERNAL SOCKETS

4

①Remote sensor:Let the remote controller aim here the set can receive remote
control signal.
②Power switch:Press the button to turn on the TV set ,press the button again to turn
off the TV set.

③Power indicator: The indicator lights when power on.
④Menu button
⑤Program up/down button
⑥Volume up/down button
⑦TV/AV

W

R

B

G R

DVD(with DVD component)

W

R

G

B

Direction of signal

white（left audio）
red（C /right audio ）
blue（C ）
green

（video）

（Y）

yellow

r

b

Y

VCR (without S-VIDEO terminal)

Y

W R

T
o

a di

o

u
t

u

o

VCR (with S-VIDEO terminal)

W R

s e

o

t

T

o

-

v

id o

utpu

v

o

u

To

ide

o

tpu

t

o
m

p e t

uT c

o o

n
n
o t

Note:

1.When receives s-video signal, you must remove video signal; when receive
video signal, you must remove s-video signal.

2.When receive front video signal, you must remove back video signal; when
receive back video signal, you must remove front video signal.

1.Front Panel

操
作
之
前

S-VIDEO

2.The sockets on the rear panel

①Antenna socket
②Audio/Video socket
③S-Video socket
④DVD component socket

VIDEO

IN

L AUDIO R

Y

Cb

Cr

OUT

①

②

③

④

S-VIDEO

VIDEO

IN

L AUDIO R

Y

Cb

Cr

OUT

AUDIO

VIDEO

L

R

CH+

CH-

VOL+

VOL-

TV/AV

MENU

①

③

⑤

⑥ ⑦

④

②

POWER SUPPLY

Power supply (switch on/off to set main power supply).

1.Press power switch button to switch on AC power supply. The red power indicator

will light.

2. Press the power switch button on the remote controller to enter normal receiving

condition when the TV set is in standby condition.

There are Auto-search, Semi-Auto search and

Fine tuning method.

Auto-search

1.Press [MENU] button, let main menu display

on the screen, then press [-VOL+] buttons to select

TUNING item.

2.Press [CH-] button to enter TUNING menu, then

press [-CH+] buttons to select AUTO MEMORY.

3. Press [VOL+] button to make the AUTO MEMORY

mode work, the TV set will begin to search

programs from program number 0.

After the search is finished, program number

0 will display on the screen.

Note: During auto-search, if you want to stop searching,

press [VOL-] button.

TUNING PROCEDURE

Remote controller functions

TV/AV exchanging button

Mute button

Numeric button

One/two/three digital buttons

Picture mode selection

Volume up/dwon button

1

2

3

4

5

6

11

15

16

17

7

Program play-forward button

8

Surround sound selection button

9

10

Volume mode selection

Display button

12

Game start or restart button

13

14

System preset button

Lock preset button

Scan button

DC standby button

18

Sleep timer

Game background selection button

Game exit button

10

6 7

19

20

Calendar display button

REMOTE CONTROLLER GUIDE

17

18

16

3

15

14

13

1 2 3

4 5 6

7 8 9

0

TV/AV

SCAN

LOCK

SYSTEM

DISPLAY

-/--

CALENDAR

MENU

CH+

PRE

STEREO

GAME

BACK

P.STD

S.STD

CH-

VOL- VOL+

1

2

5

4

6

8

9

11

10

12

7

EXIT

MODE

19

20

Program play-backward button

Intell igent button:
The n ume ric b utt on“1”ha s intell igent fu nction,
pre ss it for 6s, then the TV set w ill se arch a nd sto re
the program auto maticall y. Press 0 button continuall y
for 6s, th e brig htness, colo r, sharp ness a nd ti nt wil l be
adjuste d to the factory preset sta tus automati call y.

ASM VL 0

STOP

SOUNDPICTURE

SELECT

CONFIRM

TIMER

TUNING

FUNCTION

SELECT

ADJUST

POSITION 01
BAND VL
SKIP OFF
SEARCH DOWN
MFT UP

AUTO MEMORY

49.87 MHZ

TUNING PROCEDURE

Press [MENU] button, let main menu display on the

screen, then press

3.Press [CH-] button to enter TUNING sub-menu. Then
press

4.Press [-VOL+] buttons to start searching.

Semi-Auto search

1.Press [-CH+] buttons or numeric button (0~9) to
select the channel number you need. (For example:
channel 1).

2.
[-VOL+] buttons to select TUNING

item.

[CH-] button to select SEARCH item.

[CH-] button
is to search the program from low FC. [CH+] button is
to search the program from high FC. Repeat above
procedure until you find the channel you need.

5.When you intend to memory another channel in
another position, press [-CH+] buttons to select
POSITION item, and use [-VOL+] button to select
a number you need, then press [CH-] button to
select SEARCH, and repeat fourth
procedure.

8

Skip

After pre-tuning the channel, you can skip the
channel you do not need in order to only select
the channel you want to watch.

1.Press [-CH+] buttons or numeric button(0~9) to
select the channel number skipped(for example:
channel 1).

2.Press [MENU] button, let main menu display on
the screen, then press [-VOL+] buttons to select
TUNING item, then press [CH-] button to enter
TUNING menu.

3.Press [-CH+] buttons to select SKIP item.

4.Press [-VOL+] buttons to set SKIP ON mode.

5.Press [DISPLAY] button to shut off the menu. The
channel number will be skipped when you use
[-CH+] buttons to select channels. But you can
still use numeric button to select the channel
number skipped.
Note:

1.You can use the numeric button to select the
channel number that need recover.

2.Press [MENU] button to let the main menu
appear on the screen, then press [-VOL+]
buttons to select TUNING, and press [CH-]
button to enter TUNING menu, then select SKIP.

3.Press [-VOL+] buttons to set SKIP OFF mode.

9

TUNING PROCEDURE

1

SOUNDPICTURE

SELECT

CONFIRM

TIMER

TUNING

FUNCTION

SELECT

ADJUST

POSITION 01
BAND VL
SKIP OFF

MFT UP

SEARCH DOWN

AUTO MEMORY

49.87 MHZ

SELECT

ADJUST

POSITION 01
BAND VL
SKIP OFF

MFT UP

SEARCH DOWN

AUTO MEMORY

49.87 MHZ

SELECT

ADJUST

BAND VL
SKIP OFF
SEARCH DOWN
MFT UP

POSITION 01

AUTO MEMORY

49.87 MHZ

SELECT

ADJUST

BAND VL
SKIP OFF
SEARCH DOWN
MFT UP

POSITION 01

AUTO MEMORY

49.87 MHZ

SELECT

ADJUST

POSITION 01
BAND VL

SEARCH DOWN
MFT UP

SKIP OFF

AUTO MEMORY

49.87 MHZ

SELECT

ADJUST

POSITION 01
BAND VL

SEARCH DOWN
MFT UP

SKIP OFF

AUTO MEMORY

49.87 MHZ

10

Picture mode selection

You can select the picture mode you need
quickly in five preset modes and a user's
personal set.
Press [ P.STD] button to select the picture
quality you need. There are six picture modes
you can select in turn.
DYNAMIC, STANDARD, MILD, MEMORY,
PICTURE MUTE and COLOR MUTE.

Mode Picture quality
DYNAMIC Rich , Bright Movie
STANDARD Proper color
MILD Soft, Light
MEMORY The picture quality you set
PICTURE MUTE function ( no signal)
COLOR MUTE Black &White picture

Note: If the picture in PICTURE MUTE or COLOR MUTE
status, the TV set will recover to DYNAMIC
status when restart.

Adjust the picture status you need to Memory.

1.

Item Press [VOL-]button
CONTRAST Weak Strong
BRIGHT Dark Bright
COLOR Light Dark
SHARP Soft Sharp
B.B Light green Light purple

Note: Tint is only appear in N signal, the method of adjustment is the same
as above.

Picture mute

Press [MENU] button, let main menu display on
the screen, then press [-VOL+] buttons to select
PICTURE item, then press [CH-] button to enter
PICTURE menu.

2.Press [-CH+] buttons to select the item you want
to adjust, then press [-VOL+] buttons to adjust to
your expect effect. The picture status will be stored
to the COLOR MUTE item.

Press [VOL+]button

PICTURE AND AUDIO ADJUSTMENT FUNCTION

11

TUNING PROCEDURE

Fine tuning

Because of some reasons, if auto searching effect of program
isn't good, please fine tune your TV set.

1.Press [-CH+] buttons or numeric button(0~9)
to select the channel number that need to fine
tune.( For example: channel1)

4.Press and hold [-VOL +] buttons until the effects
of the picture and audio are good.

2.Press [MENU] button, let main menu display on
the screen, then press [-VOL+] buttons to select
TUNING item, then press [CH-] button to enter
TUNING menu.

3.Press [-CH+] buttons to select MFT item.

[VOL -] button is used to search the lower frequency
channel.
[VOL+] button is used to search the higher frequency
channel.

1

DY NAM IC

MILD

ME MORY

COLOR MUTE

STANDARD

PICTURE MUTE

SELECT

ADJUST

CONTRAST 100
BRIGHT 50
COLOR 50

B.B ON

SHARP 50

SELECT

ADJUST

POSITION 01
BAND VL

SEARCH DOWN

SKIP OFF

MFT UP

AUTO MEMORY

49.87 MHZ

SELECT

ADJUST

BAND VL

SEARCH DOWN
MFT UP

POSITION 01

SKIP OFF

AUTO MEMORY

49.87 MHZ

12

S.C.C

There is soft exchange function in this TV set, when you set this function is ON
and exchange channels, the picture will fade in/fade out to protect your eyes.

1.Press [MENU] button, let main menu display on
the screen, then press [-VOL+] buttons to select
FUNCTION item, then press [CH-] button to enter
FUNCTION menu.

2.Press [-CH+] buttons to select S.C.C item, then press
[-VOL+] buttons to set the S.C.C ON/OFF.

MUTE function

When you need pay attention to the surround sound or answer the telephone or the
guest to visit, using mute function will be convenient.

1.Press [MUTE] button on the remote controller, the( )
will appear at the bottom of the screen, at this time
the sound will be shut off.

2.If you want to recover the sound, you can press the
MUTE button again or press the [-VOL+] buttons
directly.

13

PICTURE AND AUDIO ADJUSTMENT FUNCTION

Sound mode selection

You can select the sound mode you need from
three modes quickly.
Press [S.STD] button to select the sound quality
you need. There are THEATER, NEWS, MUSIC,
PERSONAL to select in turn.

Volume set function

You can adjust the volume to your preset value
quickly(for example: BASS, TREBLE, BALANCE
or S.WOOFER)

1.Press [MENU] button to let main menu display on
the screen, then press [-VOL+] buttons to select
SOUND item, then press [CH-] button to enter
SOUND menu.

2.Press [-CH+] buttons to select BASS item, then
press [-VOL+] buttons to adjust to your expect
effect. You can adjust the parameters of TREBLE,
BALANCE and S.WOOFER by using the same way.
Note: If you want to adjust the S.WOOFER volume,
you should set the S.WOOFER ON.

THEATERTHEATER

NEWSNEWS

MUSI CMUSI C

PICTURE AND AUDIO ADJUSTMENT FUNCTION

PERS ONALPERSONA L

SELECT

ADJUST

TREBLE 68
BALANCE ±00
S.WOOFER ON
S.WOOFER 100

BASS 66

LANG. ENGLISH
CURTAIN III
POS. EX.

AUTO OFF OFF

S.C.C OFF

SELECT

ADJUST

SELECT

ADJUST

BASS 66

BALANCE ±00
S.WOOFER ON
S.WOOFER 100

TREBLE 68

SELECT

ADJUST

BASS 66
TREBLE 68
BALANCE ±00

S.WOOFER 100

S.WOOFER ON

Off timer function

When you use OFF TIMER function, you can make the TV set switch to the
standby status in that the appointing timer is coming.

1.Press

[MENU] button to let the main menu display
on the screen, then press [-VOL+] buttons to select
TIMER item.

2.Press [CH-] button to enter TIMER menu, then
press [-CH+] buttons to select OFF TIMER item,
then press [-VOL+] buttons repeatedly to set
ON-TIMER to ONCE, EVERY or OFF.

3.Press [CH-] button to select the next item, at this
time, you can set the off time by pressing [-VOL+]
buttons.

4.Press [-CH+] buttons to select CLOCK item, then
you can set the current time by pressing [-VOL+]
buttons. ( on timer/off timer take this clock as
standard )

TIME FUNCTION

14

15

TIME FUNCTION

Sleep timer function

Using the sleep timer function, the TV set can switch to the standby status
automatically when the TV set restarts after an appointing certain time.

1.The sleep timer can be set 120 minutes longest, and it can
change every 10 minutes unit, there are 12 off timer in all.

2.Press[ ] button, the bottom of the
screen will display the right figure cycle.

On timer function

Using ON TIMER function in the standby status, the TV set can connect power
supply and broadcast the appointing channel number automatically when the
appointing time is coming.

1.Press [MENU] button to let the main menu appear
on the screen, then press [-VOL+] buttons to select
TIMER item, then press [CH-] button to enter
TIMER menu.

2.Press[-CH+] buttons to select ON TIMER item,
then press [-VOL+] buttons repeatedly to set the
ON TIMER to OFF, ONCE or EVERY .

3.Press[-CH+] buttons to select next item. At this
time, press [-VOL+] buttons to set ON TIMER(the
method is the same as OFF TIMER).

4.Press[-CH+] buttons to select POS 00 item, then press
[-VOL+] buttons to set ON/OFF TIMER channel
number(for example 05).

5.Press[-CH+] buttons to select CLOCK item, then
press [-VOL+] buttons to set the current time(the
method is the same as OFF TIMER, ON/OFF
TIMER takes this clock as standard).

SLEEP: OFFSLEEP: OFF

SLEEP: 120MINSLEEP: 120MIN

SLEEP: 110MINSLEEP: 110MIN

SLEEP: 20MINSLEEP: 20MIN

SLEEP: 10MINSLEEP: 10MIN

SELECT

ADJUST

19:00
ON TIMER OFF
22:00
POS 0
CLOCK 1:40
APPOINTMENT

OFF TIMER ONCE

0
0

SELECT

ADJUST

19:00
ON TIMER OFF
22:00
POS 0
CLOCK 1:40
APPOINTMENT

OFF TIMER ONCE

0
0

SELECT

ADJUST

ON TIMER OFF
22:00
POS 0
CLOCK 1:40
APPOINTMENT

OFF TIMER ONCE

19:00

0

0

SELECT

ADJUST

ON TIMER OFF
22:00
POS 0

APPOINTMENT

OFF TIMER ONCE

19:00

0

CLOCK 01:40

SELECT

ADJUST

19:00

22:00
POS 0
CLOCK 1:40
APPOINTMENT

OFF TIMER ONCE

ON TIMER OFF

0
0

SELECT

ADJUST

19:00

22:00

CLOCK 1:40
APPOINTMENT

OFF TIMER ONCE

ON TIMER OFF

POS 00

0

16

17

TIME FUNCTION

Appointing program

1.Press [MENU] button to let the main menu display
on the screen, then press [-VOL+] buttons to select
TIMER item, then press [CH-] button to enter
TIMER menu.

2. Press [-CH+] buttons to select CLOCK item, then
press [-VOL+] buttons to set the current time( the
method is the same as OFF TIMER,
APPOINTMENT takes this clock as standard).

3.Press [CH-] button to select APPOINTMENT item.
Then press [-VOL+] buttons to enter APPOINTMENT
sub-menu.

4.Press [-VOL+] buttons to set the POS. you need
( for example:100).

5.Press [CH-] button to enter TIMER item. Then
press [-VOL+] buttons to set the time. Pressing
[-VOL+] buttons, the time will change with 1
minute unit. Pressing and holding [-VOL+] buttons,
the time will change with 10 minutes unit.

6.Press [CH-] button and repeatedly the fourth and
fifth to set the next POS.l.

7.Press [DISPLAY] button to exit the [TIMER] menu.
When the timer is coming, the TV set will
switch to the channel number you appointed
automatically.
The APPOINTMENT is only valid in ON
TIMER status, it is invalid in AC or DC standby status.

APPOINTMENT
POS. TIME

000 OFF
000 OFF
000 OFF
000 OFF
000 OFF

000 OFF

SETTING FUNCTION

Language selection

1.Press [MENU] button to let the main menu display
on the screen, then press [-VOL+] buttons to select
FUNCTION item, then press [CH-] button to enter
FUNCTION menu.

2. Press [-CH+] buttons to select LANG. item, then
press [-VOL+] buttons to select language, the
character will display with the change of language.

Screen projection function
When the background function is activated and the
TV set receive no signal, the screen will change into
the right figure.(game screen projection picture).

1.Press [MENU] button to let the main menu display
on the screen, then press [-VOL+] buttons to select
PICTURE item, then press [CH-] button to enter
PICTURE menu.

2.Press [CH-] button to select B.B item, then press
[-VOL+] buttons to set the B.B ON.

I
I
I
I
I
I
I
I
I
I

I
I
I
I
I
I
I
I
I
I

SCORE 000

SELECT

ADJUST

19:00
ON TIMER OFF
22:00
POS 0

APPOINTMENT

OFF TIMER ONCE

0

CLOCK 01:40

APPOINTMENT
POS. TIME
1
000 OFF
000 OFF
000 OFF
000 OFF
000 OFF

00 OFF

APPOINTMENT
POS. TIME
1
000 OFF
000 OFF
000 OFF
000 OFF
000 OFF

00 12:58

CURTAIN III
POS. EX.
S.C.C OFF
AUTO OFF OFF

LANG. ENGLISH

SELECT

ADJUST

SELECT

ADJUST

CONTRAST 100
BRIGHT 50
COLOR 50

SHARP 50

B.B ON

SETTING FUNCTION

18

Stage curtain for open and close effect

There are three different method of stage curtain for open and close effect, you
can select according to your need.

1.Press [MENU] button to let the main menu display
on the screen, then press [-VOL+] buttons to select
FUNCTON item, then press [CH-] button to enter
FUNCTION menu.

2. Press [-CH+] buttons to select CURTAIN item, then
press [-VOL+] buttons to select one of I, II or III.
I: stage curtain for open and close effect
II: fade in/fade out
III: mix stage curtain for open and close effect

Calendar function

The calendar of this TV set stores the years from 1901year to
2050 year.

1.Press [CALENDAR] button on the remote controller
the calendar will be displayed on the screen(pressing
it again, you can cancel the on-screen display).

2.Press [-CH+] buttons to adjust year, press [-VOL+]
buttons to adjust month.

SETTING FUNCTION

Exchange

For example: exchange the position of the position number 1 with position
number 9

1.Press [MENU] button to let the main menu display
on the screen, then press [-VOL+] buttons to select
FUNCTION item, then press [CH-] button to enter
FUNCTION menu.

2. Press [-CH+] buttons to select POS.EX item, then
press [-VOL+] buttons to enter POS.EX sub-menu.
The digit of EX.POS1 and EX.POS2 item are the current
position number.

3.Press [-CH+] buttons to select EX.POS2 item, then
press [-VOL+] buttons to input position number 9.

4.Press [-CH+] buttons to select EXCHANGE item,
then press [-VOL+] buttons to enter. At this time,
the program of original position number 1 is
exchanged to position number 9, the program of
original position number 9 is exchanged to position
number 1.

POS.EX

EX.POS2 1
EXCHANGE ？
RETURN

EX.POS1 1

9

19

JAN 2004

SU MO TU WE TH FR SA

1 2 3
4 5 6 7 8 9 10
11 12 13 14 15 16 17
18 19 20 21 22 23 24
25 26 27 28 29 30 31

POS. EX.
S.C.C OFF
AUTO OFF OFF

LANG. ENGLISH

CURTAIN III

SELECT

ADJUST

LANG. ENGLISH
CURTAIN III

S.C.C OFF
AUTO OFF OFF

POS. EX.

SELECT

ADJUST

POS.EX
EX.POS1 1

EXCHANGE ？
RETURN

EX.POS2 9

SETTING FUNCTION

SETTING FUNCTION

There is lock function in this TV set, you can select it to protect your TV set
according to your need.

定时关机功能

The password of the TV set is preset "0000" in
manufacture, if you want to change the password,
you can fill in four digits.

Changing password

3.Press numeric buttons and
input four digits.

1.Press [LOCK] button, OSD is
as the right figure.

4. The screen returns to the
original status after inputting
new password(see the right
figure), at this time you can
input new password to enter
password set menu.

LOCK SET UP
PASSWORD: - - - -

LOCK SET UP

TUNING LOCK OFF
PRESET PROG. OFF
AV LOCK OFF
GAME LOCK OFF
CHILD LOCK OFF
MAX.VOLUME OFF
UNLOCK

CHANGE PW.

CHANGE PW.

NEW PW. - - - -

LOCK

1 2 3

4 5 6

7 8 9

0

MENU

CH+

CH-

VOL+VOL-

2.Press "0" button directly for
four times, and enter LOCK
SET UP menu. Press
buttons to select CHANGE PW.

item, then press [VOL+] button
to enter CHANGE PW.
sub-menu.

[-CH+]

LOCK SET UP
PASSWORD: - - - -

20

21

The TV set can lock tuning, preset program,
AV, game and child lock items, if you need to lock
them, you can set as following procedure.

Lock set up

3.Press buttons to
select TUNING LOCK
item, and press [VOL+]
button to select ON or
OFF.

[-CH+]

1.Press [LOCK] button, and
OSD is as the right figure.

LOCK

1 2 3

4 5 6

7 8 9

0

MENU

CH+

CH-

VOL+VOL-

Note:

1.When the tuning lock is on, you should enter password
to enter the tuning menu, meanwhile you cannot exchange
the program and press 1 button to enter auto search.

2. You can set the default program of on timer by using the
function of preset program.

3.When the AV lock is on, the AV terminal is invalid, at this
time, the screen become black screen and remind that it
is locked, the TV set in mute status.

4.When the child lock is on, the screen will remind that
it is in CHILD LOCK status if you press the buttons of
the TV set, and the buttons of this TV set are invalid.

5.When the game lock is on, the [GAME] button on the
remote controller is invalid.

6. The max volume lock can restrict the max volume of the
TV set, if you set the volume lock 50, the max volume of
the TV set is 50, when you press [VOL+] button to adjust
the volume value that is over 50, the volume will not
change with it any more.

2.Press "0" button directly
for four times (or press the
four-digit password you have
changed) to enter LOCK SET
UP menu.

LOCK SET UP

TUNING LOCK OFF
PRESET PROG. OFF
AV LOCK OFF
GAME LOCK OFF
CHILD LOCK OFF
MAX.VOLUME OFF
UNLOCK

CHANGE PW.

LOCK SET UP
PASSWORD: - - - -

CHANGE PW.

NEW PW. - - - -

GAME

When you select“SUBMARINE”game item, enter game mode and the other
buttons (except [GAME], , ， ) are invalid, unless you exit the
game.

[-VOL+] [-CH+]

Play game:

Instructions of game controlling buttons

2.Use the remote controller to operate yellow
battle ship. Yellow battle ship bump one of
green ship or blue ship or purple ship or red
ship or blue shot. and game is over. Yellow ship
use [MENU] button shoot shots. The shot bumps
green ship or blue ship or purple ship or blue
shot and win 100scores,the shot bumps red ship,
and win 1000 scores.

3.During game or game is over, press [Game] button
and game can restart. Ship obtaining highest
scores wins.

I
I
I
I
I
I
I
I
I
I

I
I
I
I
I
I
I
I
I
I

SCORE 000

I
I
I
I
I
I
I
I
I
I

I
I
I
I
I
I
I
I
I
I

SCORE 5800
GAME OVER

1.Press [Game] button to enter game.

MENU

CH+

CH-

VOL- VOL+

GAME

MODE

EXIT

Fire button

Up/Down
button

Left/Right
button

Selection buttons of
game background

Game button

Game exit button

Note:1.If the problem can not be fixed after you check above items. DO NOT attempt
to remove the back cover by yourself.

2.If the snapping sound from the cabinet of the TV set can be heard occasionally
because of temperature changing of environment, it is normal, you can use it
reassuringly.

TROUBLE SHOOTING GUIDE

BREAKDOWN PHENOMENON

PICTURE

SOUND

CHECKING

The direction and connection of the
antenna

Direction, station and connection
of the antenna

Interference from electric
appliance. Automobile、Motor,
Vehicle Fluorescence lamp etc.

Volume, Sound mute

The power plug isn't plugged in AC
outlet. The main power isn't turned
on. The setting up of contrast, brig­htness and volume.

Adjust color control

Adjust channel again

Moving the TV set or using magnetic electric appli­ance near TV, Which will lead to color spot on sc­reen. Please remove the electric appliance and cut
off power. After 120 minutes turn the TV on, the pic­ture will be recovered.

The following problems are not always caused by hardware failure, please use the
follow trouble shooting guide before you call for service:

?

Picture with s now

Color Spot

No Color

No Picture

Normal

Disturb

Double or Triple Image

Noise

Normal

Noise

No Sound

No Sound

Normal Volume

Normal or Weak Volume

Normal Volume

??

Scramble

22

23