1. When you clean the TV set, please
pull out the power plug from AC outlet.
Don't clean the cabinet and the
screen with benzene, petrol and other
chemicals.
2. In order to prolong the using life of
the TV set, please place it on a
ventilated place.
3. Don't place the
TV set in the
sunshine or near
heat source.
4. To prevent the TV set from firing and
electric shock, don't
Make the TV set rain
or moisture.
5. Don't open the back cover, otherwise
it is possible to damage the
components in the TV set and harm you.
6. When the TV set isn't going to be
used for long time or it is in thunder and
lightening, please pull out the plug from
AC outlet and the antenna plug from
the cover of the TV set.
Explanation on the display tube
In general, it is not needed to clean the tube surface. However, necessary,
it's surface can be cleaned with a dry cotton cloth after cutting off the power.
Don't use any cleanser. If using hard cloth, the tube surface will be damaged.
Installation
Antenna connection
Generally speaking, to enjoy a clearer picture, we recommend that you use a CATV
system or an outdoor antenna .In different places, the suitable antenna type and position
are different.
300 twin-lead cable
Antenna adapter
(additional purchase)
75 coaxial cable
Note
* It is recommended that you'd better use 75
disturbance caused by airwave.
* Don't bind antenna cable and power wire together.
coaxial cable to remove the
Preparation of the remote control unit
Battery installation
Take off the battery compartment cover. Place two AA batteries, make sure that battery
polarity matches with the +/- mark inside the battery compartment.
Operation notes for the remote control unit
Under normal conditions, the life time of batteries is one year.
If you don't intend to use the unit for a long period or the electricity of the batteries is
used up, remove the batteries to prevent batteries acid from leaking into the battery
compartment.
Don't throw your batteries into a fire. Dispose of your batteries with a specified method.
Avoid the falling and the wetting of the remote control unit.
Function buttons and external sockets
Front panel of the TV set
Right sound track
TV/AV
(input select
Volume down/up
Program down/up
Rear panel of the TV set
MENU
Power switch
Left sound track
Video1 terminal
S terminal
Remote sensor
Power indicator
Antenna input
Video output terminals: VIDEO AUDIO L, R
Video 2 input terminals: VIDEO AUDIO L, R
DVD input terminals: Y, Cb, Cr AUDIO L, R
If you want to connect the TV set to the other audio/video equipments, please
refer to P23.
Buttons on the remote control
Program scan
Mute
Program number
Digital selector
Picture mode
selection
Volume selection
Picture menu
Sound menu
Time menu
Lock/unlock
selectable
Stand by
Zoom function
Call screen display
Exit screen display
TV/AV exchange
Mono/stereo
Sound mode selection
Channel selection
Menu selection /
adjustment
Former program
Tune menu
Function menu
Switching on/ off the TV set
In the following, the methods of using power switch and remote control to switch
on/off power supply for the TV set will be explained.
Switching on/ off the TV set
Switching on/ off the TV set
1 Please press the power switch to switch on AC
power supply and the power indicator will be light .
TV/AV
(input select
Power switch
MENU
Volume down/up
Program down/up
Remote sensor
Power indicator
2 If the indicator is lighting in red, press the button
on the remote control again.
Note
1 When you don't operate the TV set with a
remote control, you can turn on it directly by
pressing the program on the front panel
buttons
of the TV set, when child lock is off.
4
AUTO
BG
2 If you want to exchange to standby status,
please press the button on the remote
control.
3 If you want to fully switch off the power supply
for the TV set, please press the power switch
button on the front panel of the TV set.
Auto switch-off function
When the "Back ground" function is ON, if an
empty channel is selected or the TV programs
are ended for the day, the power will be switched
off 5 minutes later automatically. If the "OFF
TIME" is ON, it will be switched off according to
the preset time. The auto power off function does
not work or when the background is off.
(Note: If the "OFF TIMER" is less than 5
minutes, it will be switched off automatically to the
preset time. )
Watching TV
You can watch TV program in a preset channel.
Watching TV program
How to select TV program
Select the desired program
1 Using "Program number" buttons
When to select a channel number with one digit, please press
some a number among 0-9 to select desired channel.
When to select a channel number with two digits, please
press the [-/-- ]button to show "--" on the top left of the screenand
then press two numbers among 0-9 to select desired channel.
When to select a channel number with three digits, please press
the [-/--] button to show "---" on the top of the screen and then
press three numbers among 0-9 to select desired channel.
2 Using the CH+/- buttons
Press the CH+ button to select a channel number in number
increasing
Press the CH- button to select a channel number in number
decreasing
Select the desired sound
Press the VOL+/- buttons to adjust volume.
If the colour or sound of some channel is abnormal
The settings of the colo r
system or the sound system
may be wrong.
Press the TUNE button and
setting menu shown on the
right will display on the screen.
direction.
direction.
u
TUNE
COLOUR AUTO
SOUND BG
BAND VHFL
SKIP OFF
PROGRAM 0
SEARCH
FINE TUNE
AUTO SEARCH
If the picture colo r is not normalu
Press the CH+/- buttons to move cursor to "COL UR",
press the o
then VOL-/+ buttons to select the correct col ur
system.
In general, you can set it as "AUTO". AUTO,PAL,NTSC ,
NTSC443 and SECAM will display in turn.
O
If the picture sound is abnormal
Press the CH+/- buttons to move cursor to "sound",then
press the VOL-/+ buttons to select the correct sound system.
In general, BG will display in turn.DK,
Loading...
+ 19 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.