Haier 25FA18-T, 21FA11, 21FA11-AM, 29FA1, 29FA18 Owner's Manual
...
The Owner`s Manual for the Follow Models:
21FA11,21FA11-AM,29FA1,
29FA18,29FA11-AM,29FA12-AM
25FA18
Please READ this manual carefully
before operating the unit, and keep
it for future reference.
COLOR TV RECEIVER
OWNER'S MANUAL
CONTENTS
Before Operation
Basic operation
Warning and cautions............................................................................1
Installation...............................................................................................2
Aerial connection...................................................................................2
Preparation of the remote control unit...................................................2
Function buttons and external sockets................................................3
Front panel of the TV set........................................................................3
Rear panel of the TV set........................................................................3
Buttons on the remote control..............................................................5
Switching on/off the TV set....................................................................6
Watching TV program.............................................................................7
Watching TV program...........................................................................7
Program swap and auto scan functions................................................8
Searching channel..................................................................................9
Full automatic search mode..................................................................9
Semi-automatic search.......................................................................10
Program skip ......................................................................................12
Convenient picture and sound control functions.............................
.........................................................................23
Specifications.......................................................................................24
Manual fine tune..................................................................................11
Position exchange function.................................................................21
Others
Multiple picture modes ......................................................................13
Black stretch and noise reduce...........................................................14
Mute function......................................................................................15
Time functions......................................................................................16
Clock setting and timer on/off functions...........................................16
Sleep timer and program preset ......................................................17
Setup function ....................................................................................18
Screen saver and child lock functions................................................18
AVL and calendar functions................................................................19
Fade and select language..................................................................20
Connection to the external audio and video equipment..................22
Troubleshooting guide
13
*Please read this manual carefully before using your television and keep this
manual in a good place for future reference.
*To achieve the best performance of your television, read this User's Manual
carefully and properly store it for future reference.
*Information of screen displays and figures in the User's Manual may vary due
to technical innovations or different models.
Warning and cautions
1. When you clean the TV set, please
pull out the power plug from AC outlet.
Don't clean the cabinet and the
screen with benzene, petrol and other
chemicals.
4. Do not place the TV set near rain or
moisture as it may cause an electric
shock, or the TV set to catch fire. The
TV set must only
be used in dry in
door locations.
2. In order to prolong the using life of
the TV set, please place it in a well
ventilated location.
5. The back cover must only be
removed by a registered electrical
service person. Removing the back
cover may result in electric shock, fire
or damage to
the TV set.
3. Don't place the TV
set in direct sunlight
or near a heat source.
6. If the TV set is not going to be used
for a long time, or there is a severe
thunder & Lighting storm, it is
recommended that the TV set be
disconnected from the AC power outlet
and the aerial plug removed.
Explanation on the display tube
Should the picture tube require cleaning, disconnect the power and use a dry
soft cotton cloth. Do not use any cleaner or abrasive cloths.
Installation
Battery installation
Take off the battery compartment cover. Place two AAA batteries, make sure that battery
polarity matches with the +/- mark inside the battery compartment.
Aerial connection
For an optimum high quality picture, it is strongly advised that the TV set connect to an
external aerial(s) using high quality coax cable. When connecting to HiFi VCRs, satellite
(or cable) set top boxes, that the AV terminals are used to allow the stereo sound to be
transferred.
Preparation of the remote control unit
Operation notes for the remote control unit
Under normal conditions, the life time of batteries is one year.
If you don't intend to use the unit for a long period or the electricity of the batteries is
used up, remove the batteries to prevent batteries acid from leaking into the battery
compartment.
Avoid dropping the remote control and/or getting it wet.
Never place batteries in a fire.
300 twin-lead cable
Antenna adapter
(additional purchase)
75 coaxial cable
Front and side panel of the TV set
Audio Input
terminal
VIDEO
R
L
AUDIO
Video Input
terminal
TV/AV
V- V+ P- P+
MENU
Power switch
Infrared receiver
Power indicator
Channel position updown/
Volume up down/
MENU
TV/Video
(input selector
TV/AV
VOL- VOL+
CH- CH+
MENU
TV/Video
(input selector
MENU
Volume up down/
Channel position updown/
Power switch
Power indicator
Infrared receiver
21FA11/21FA11-AM
29FA1
Note: 1.Please do not use the S-Video input terminal and the video input terminal together.
2.The cabinet and buttons of TV is only for reference.
29FA12-AM
29FA11-AM
TV/AV
VOL- VOL+
CH- CH+
MENU
Power switch
Infrared receiver
Power indicator
Channel position updown/
Volume up down/
MENU
TV/Video
(input selector
Function buttons and external sockets
Function buttons and external sockets
If you want to connect the TV set to the other audio/video equipment, please
refer to P22.
Back panel
VIDEO
Y Cb Cr
L-AUDIO-R
Video C Input terminal
b
Video Y Input terminal
Video Input terminal
Antenna Input socket
r
Video C Input terminal
Audio Input terminal
S-VIDEO
S-VIDEO input terminal
OUT
IN
Video Output terminal
Audio Output terminal
VIDEO
Y
Cb
Cr
L
AUDIO
R
Video C Input terminal
b
Video Y Input terminal
Video Input terminal
Antenna Input socket
r
Video C Input terminal
Audio Input terminal
S-VIDEO
S-VIDEO input terminal
OUT
IN
Video Output terminal
Audio Output terminal
IN
21FA11/21FA11-AM/29FA18/25FA18
29FA1/29FA11-AM/29FA12-AM
Audio Input
terminal
VIDEO
R
L
AUDIO
Video Input
terminal
29FA18
25FA18
Buttons on the remote control
Buttons and Descriptions
Mute Button
Press to conceal the sound of programs.
Stand by Button
Screen Display Button
Swap function Button
TV and AV Exchange Button
To exchanger between TV and
other available video inputs
Digital selector
Program number Button
Program scan Button
Time menu
Picture mode selection
Function menu
Menu Select/ Adjust Button
Use this button to adjust the menu,
the volume and the channels.
Tune menu
Picture menu
Exit screen display
MUTE POWER
CALL
SWAP
TV/AV
-/--
1 2 3
4 5 6
7 8 9
0
SCAN
TIME
P.STD
CH+
CH-
VOL
-
VOL
+
MENU
PICTURE
TUNE
EXIT
FUNCTION
Switching on/ off the TV set
POWER
In the following, the methods of using power switch and remote controller to switch
on/off power supply for the TV set will be explained.
Switching on/ off the TV set
Switching on/ off the TV set
1 Please press the power switch to switch on AC
power supply and the power indicator will light.
2 If the TV is in the state of standby, press the
POWER button on the remote control again.
Note
1 When you don't operate the TV set with a
remote control, you can turn on it directly
through pressing the P+/- or CH+/-buttons on
the TV set(Child Lock must be turned off).
2 If you want to exchange to standby status,
please press down the POWER button on the
remote control.
3 If you want to fully switch off the power supply
for the TV set, please press the power switch
button on the TV set.
Auto switch-off function
When the "Back" function is on, if an empty
channel is selected or the TV programs are
ended for the day, the power will be switched off 5
minutes later automatically. If the "OFF TIME" is
on, it will be switched off according to the
presetting time. The auto power off function does
not work under video input or when the
background is off.
(Note: If the "off timer" is less than 5 minutes, it
will be switched off automatically to the preset
Time. )
4
AUTO
DK
CH+
CH-
VOL
-
VOL
+
MENU
TUNE
CH+
CH-
VOL
-
VOL
+
MENU
1 2 3
4 5 6
7 8 9
0
Watching TV
Watching TV program
You can watch TV program in a preset channel.
How to select TV program
Select the desired program
Select the desired sound
1 Using "Program number" buttons
2 Using the CH+/- buttons
Press the CH+ button to select a channel number in number
direction.
Press the CH- button to select a channel number in number
direction.
increasing
decreasing
Press the VOL-/+ buttons on the remote or the front of the
TV set to adjust the volume level. The range is 0~100. When
the volume buttons are pressed the volume level is
displayed automatically on the TV screen.
If picture colo r is abnormalu
Use the CH+/- buttons to select Colour then the
VOL-/+ buttons to change between Auto,
. Press the EXIT button to save
the setting.
PAL, NTSC,
SECAM and NTSC443
If the colour or sound of a channel is abnormal
Usually this should be set in the
Auto position. However if the
colours displayed on the screen
are incorrect you can manually
select the correct colour system.
When finish remember to turn it
back to auto again so that other
programs will still work correctly.
To select the colour change
option press the TUNE button
on the remote control.
Directly enter the channel number with the numeric keypad
on the remote control.
To select channel numbers from 10 ~ 99 press [-/--] button
and enter the two digit channel number
To select channel numbers from 100 ~ 218 press [-/--] button
twice and enter the 3 digit channel number
If the picture sound is abnormal
Use the CH+/- buttons to select Sound then press the
VOL-/+ buttons to select the sound system.
TUNE
SOUND BG
BAND VHFL
SKIP OFF
PROGRAM 0
SEARCH
FINE TUNE
AUTO SEARCH
COLOUR AUTO
Loading...