Haier 25F3A, 25F9K User Manual

25F9K/25F3A

COLOUR TV RECEIVER

OWNER'S MANUAL

MAIN FUNCTIONS

Slide Curtain Power On/Off Display 218 Channels Preset Multiple Picture & Sound Modes On/Off Timer Child Lock Soft Change Channel Function Count Time Channels Appointment DVD Video Component Input Terminals AV Stereo

Please read this manual carefully before operating the unit, and keep it for future reference.

CONTENTS

Before Operation

Warning and Cautions Installation

Antenna connection

Preparation for the remote control

Position of keys and plug-ins

Front and side panel Back panel

Using

the remote control

Basic Operation

Power on and power off Viewing TV programs

Viewing TV programs Program scan and screen display

Tuning

Automatic search. . .

Manual search MFT Skip

Adjusting the picture and the sound

Multiple picture modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ... . 1 3

Multiple sound modes and setting the speakers.

S.C.C,count and mute

Setting the Timer

Timer off. .

Sleep timer and timer on

Channels appointment

Setting the other function

Language and screen protection Curtain function,AUTO OFF and calendar display Channel exchange

Setting the lock

Changing your password

Setting the lock Game Game control buttons and method of playing the game

Technical operation

Connecting Additional Equipments

Others

Troubleshooting Specifications

Warning and Cautions

1. When you clean the TV set, please pull out the power plug from AC outlet. Don't clean the cabinet and the screen with benzene, petrol and other chemicals.

2. In order to prolong the using life of the TV set, please place it on a ventilated place.

3. Don't place the TV set in the sunshine or near heat source.

4. To prevent the TV set from firing and electric shock, don't expose the TV set to rain or moisture.

5. Don't open the back cover, otherwise it is possible to damage the components in the TV set and harm you.

6. When the TV set isn't going to be used for long time or it is in thunder and lightening, please pull out the plug from AC outlet and the antenna plug from the cover of the TV set.

Explanation on the display tube

In general, it is not needed to clean the tube surface. However, necessary, it's surface can be cleaned with a dry cotton cloth after cutting off the power. Don't use any cleanser. If using hard cloth, the tube surface will be damaged.

Installation

Antenna connection

Generally speaking, to enjoy a clearer picture, we recommend that you use a CATV system or an outdoor antenna .In different places, the suitable antenna type and position are different.

300 twin-lead cable

Antenna adapter

75 coaxial cable

Plug (additional purchase)

Note

* It is recommended that you'd better use 75

coaxial cable to remove the

disturbance caused by airwave.

* Don't bind antenna cable and electric wire together.

Preparation for the remote control

Battery installation

Remove the batteries cover.

Insert two size AA batteries matching the +/-polarities of the battery to the +/marks inside the battery compartment.

Tips for remote operation

! The battery life should be about one year under normal use.

! When the remote control will not be used for a long period of time or when the batteries are worn out, remove the batteries to prevent leakage. ! Do not throw the batteries into a fire.

Dispose of used batteries in the specified manner.

! Do not drop, dampen or disassemble the remote control.

Mixer

additional

purchase

Antenna input

75 standard

coaxial type

AC power socket

Position of Keys and Plug-ins

Front and side panel

25F9K

V-

25F3A

TV/AV switch

Volume up/ down

Channel position up/down

Power indicator

Power switch

Infrared sensor window

Video

Left audio

Right audio

Video

Signal receiver

Please do not use the side and back AV terminals simultaneously.

Back panel

Video Cb input terminal

Video Y input terminal

Video input terminal

Video output terminal S-VIDEO input terminal

Power switch

R/L

Power indicator

audio

Video Cr input terminal

Antenna input socket Audio right channel input terminal

Audio left channel input terminal

Audio right channel output terminal

Audio left channel output terminal

Using the Remote Control

Buttons and Descriptions

DISP

P.STD

PRE

MODE

LIGHT

VOL-

TV/AV

SYSTEM

I/II

CH+

CH-

SCAN

LOCK

CALENDAR

S.STD

VOL+

BACK

GAME

EXIT

TV and AV Exchange Button To exchanger between TV and

other available video inputs

Mute Button Press to conceal the sound of programs.

Screen Display Button

System Adjust Button

Direct-digit Choosing Button Directly select channel numbers

Digit Select Button Change the channel position number

between one digit, two-digits and three

-digits.

Picture Mode Select Button There are DYNAMIC, STANDARD,

MILD,MEMORY, PICTURE MUTEand COLOR MUTE six modes of picture.

Menu Select/ Adjust Button Use this button to adjust the menu,

the volume and the channels, as well as to control the game.

Program Play-forward Button

I/II Button (The model no including) Game Background Select Button Background Lamp Control Button

(The model no including) Start/Restart Game Button

Game Exit Button

Program Play-backward Button

Sound Mode Select Button

There are high, normal and low three

kinds of sound modes.

Calendar

Program Scan Button

Lock Setting button

DC Standby Button

Sleep Timer Button

Power On and Power Off

Below are methods on how to power on/off the TV set with the switch on the TV and on the remote control.

Power on/off

Connect/disconnect to the power

1. Connect the power supply wire, then press

Infrared sensor window

Power switch

V-

TV/AV switch

Volume up/ down

(F 25F9K) ront and side panel of

Power indicator

Channel position up/down

power switch button, the red power indicator will light, in several seconds the picture will appear on the screen.

2. If the TV is in the state of standby, press the button on the remote control.

NOTE

1. You can also press the 0-9 button to call off the standby status instead of pressing the DC Standby button. Press the digit button of the preset channel (limited to one digit) , you can complete the selection of channel while you turn on the TV set( To operate the preset of TV channel, please see TUNING on page 9-12).

2. When you do not use the remote control, you can directly press the the button on the television to call off the standby status.

DC Standby Button

Direct-digit Choosing Button

3. Press the button on the remote control to get into the standby state.

4. Press the button on the TV set to completely turn off the TV.

Power supply auto-off function

When the B.B(black background) is set ON, and there is no signal , game screen protection works, and ,in15 minutes later, it will change into standby status.

Viewing TV Programs

The channels amount to 218 .

Viewing TV programs

How to select the TV program

1. Use the direct-digit choosing button Press the button from 0-9 to select a one digit channel. If you want to select a two-digits channel, press the Digit Select button and change it into two-digits mode, then press the number of the channel. If you want to select a three-digits channel, press the Digit Select button and change it into three-digits mode, then press the number of the channel. If the channel position number you select is larger than 218,

Direct-digit Choosing button

Digit Select button

PRE BACK

SYSTEM

the TV will use the first two number as the channel position.

2. Use CH+/- button Press CH+ to increase the channel position number.

Press CH- to decrease the channel position number.

3. Use PRE button and BACK button

Press PRE button, you can go back to the channels you viewed (as many as four).

Then, press Back button, you can return to the channels you

were watching just now (as many as four) .

For example, if you have viewed channel 1,2,3,4,5,6 after the TV is powered on, and the channel you are watching now is number 7, then press PRE button, you can view channel 6,5, 4,3, and you may press the Back button to return to channel 7.

Choose the proper volume you like

Press VOL+/- button to adjust the volume.

VOLUME

CH+

VOL- VOL+

CH-

If the color or sound of one channel is abnormal

It might be because the color or sound system has been set improperly.You may follow the instruction below to adjust it. Press SYSTEM button, and you can see the form.

If the color of the picture is abnormal Press CH+/- button, and move the indicator to COLOR,

and press VOL+ button to select the proper color(AUTO,PAL, NTSC4.43 and NTSC3.58 will appear alternately). Generally, please set to AUTO.

If the sound is abnormal

Press CH+/- button, and move the indicator to SOUND, and press VOL+/- button to select the proper sound. (The sound system of the TV set is BG).

COLOR AUTO

SOUND BG

select adjust

COLOR AUTO

SOUND BG

select adjust

Viewing TV Programs(coutinued)

Program scanning function is to let the television automatically scan all preconcerted channel program(about two seconds per channel).

Program scan and screen display

½ÚÄ¿ä¯ÀÀ¼°ÆÁÄ»ÏÔÊ¾¹¦ÄÜ

Program scanning function

1. If you want to scan the programs and select your favorite channel , just press the SCAN button, then

SCAN

the television will start scanning from the present channel with a rate of two seconds per channel and until all the preconcerted programs have been displayed once, the TV set will return to the starting channel.

2. If you want to terminate this function during the scanning, press the SCAN button again, and the program will stay at the present channel.

DISP

Screen display

Usually, when you press the DISP button, the channel number will appear on the top right corner of the screen and press it again, the channel number will disappear .

+ 22 hidden pages