Page 1
25F9K/25F3A
COLOUR TV RECEIVER
OWNER'S MANUAL
MAIN FUNCTIONS
Slide Curtain Power On/Off Display
218 Channels Preset
Multiple Picture & Sound Modes
On/Off Timer
Child Lock
Soft Change Channel Function
Count Time
Channels Appointment
DVD Video Component Input Terminals
AV Stereo
Please read this manual carefully before operating
the unit, and keep it for future reference.
Page 2
Page 3
CONTENTS
Before Operation
Warning and Cautions
Installation
Antenna connection
Preparation for the remote control
Position of keys and plug-ins
Front and side panel
Back panel
Using
the remote control
Basic Operation
Power on and power off
Viewing TV programs
Viewing TV programs
Program scan and screen display
Tuning
Automatic search. . .
Manual search
MFT
Skip
Adjusting the picture and the sound
Multiple picture modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ... . 1 3
Multiple sound modes and setting the speakers.
S.C.C,count and mute
Setting the Timer
Timer off. .
Sleep timer and timer on
Channels appointment
Setting the other function
Language and screen protection
Curtain function,AUTO OFF and calendar display
Channel exchange
Setting the lock
Changing your password
Setting the lock
Game
Game control buttons and method of playing the game
Technical operation
Connecting Additional Equipments
Others
Troubleshooting
Specifications
Page 4
Warning and Cautions
1. When you clean the TV set, please
pull out the power plug from AC outlet.
Don't clean the cabinet and the
screen with benzene, petrol and other
chemicals.
2. In order to prolong the using life of
the TV set, please place it on a
ventilated place.
3. Don't place the
TV set in the
sunshine or near
heat source.
4. To prevent the TV set from firing
and electric shock, don't expose the
TV set to rain or moisture.
5. Don't open the back cover,
otherwise it is possible to damage the
components in the TV set and harm
you.
6. When the TV set isn't going to be
used for long time or it is in thunder
and lightening, please pull out the
plug from AC outlet and the antenna
plug from the cover of the TV set.
Explanation on the display tube
In general, it is not needed to clean the tube surface. However, necessary,
it's surface can be cleaned with a dry cotton cloth after cutting off the power.
Don't use any cleanser. If using hard cloth, the tube surface will be damaged.
Page 5
Installation
Antenna connection
Generally speaking, to enjoy a clearer picture, we recommend that you use a CATV
system or an outdoor antenna .In different places, the suitable antenna type and position
are different.
300 twin-lead cable
Antenna adapter
75 coaxial cable
Plug
(additional purchase)
Note
* It is recommended that you'd better use 75
coaxial cable to remove the
disturbance caused by airwave.
* Don't bind antenna cable and electric wire together.
Preparation for the remote control
Battery installation
!
Remove the batteries cover.
!
Insert two size AA batteries matching
the +/-polarities of the battery to the +/marks inside the battery compartment.
Tips for remote operation
! The battery life should be about one year
under normal use.
! When the remote control will not be used
for a long period of time or when the
batteries are worn out, remove the batteries
to prevent leakage.
! Do not throw the batteries into a fire.
Dispose of used batteries in the specified
manner.
! Do not drop, dampen or disassemble the
remote control.
Mixer
additional
purchase
Antenna input
75 standard
coaxial type
AC power socket
Page 6
Position of Keys and Plug-ins
Front and side panel
25F9K
Menu
V
+
V-
25F3A
TV/AV
switch
V
A
/
V
T
TV/AV
switch
Menu
U
N
E
M
Volume
up/ down
Volume
up/ down
P
-
P
+
Channel
position up/down
Channel
position up/down
Power indicator
Power switch
Infrared sensor window
Video
Left audio
Right audio
Video
Signal receiver
Please do not use the side and back AV terminals simultaneously.
Back panel
Video Cb input terminal
Video Y input terminal
Video input terminal
Video output terminal
S-VIDEO input terminal
Power
switch
R/L
Power indicator
audio
Video Cr input terminal
Antenna input socket
Audio right channel input terminal
Audio left channel input terminal
Audio right channel output terminal
Audio left channel output terminal
Page 7
Using the Remote Control
Buttons and Descriptions
DISP
P.STD
PRE
MODE
LIGHT
VOL-
TV/AV
SYSTEM
I/II
CH+
MENU
CH-
SCAN
LOCK
CALENDAR
S.STD
VOL+
BACK
GAME
EXIT
TV and AV Exchange Button
To exchanger between TV and
other available video inputs
Mute Button
Press to conceal the sound of programs.
Screen Display Button
System Adjust Button
Direct-digit Choosing Button
Directly select channel numbers
Digit Select Button
Change the channel position number
between one digit, two-digits and three
-digits.
Picture Mode Select Button
There are DYNAMIC, STANDARD,
MILD,MEMORY, PICTURE MUTEand
COLOR MUTE six modes of picture.
Menu Select/ Adjust Button
Use this button to adjust the menu,
the volume and the channels, as well
as to control the game.
Program Play-forward Button
I/II Button (The model no including)
Game Background Select Button
Background Lamp Control Button
(The model no including)
Start/Restart Game Button
Game Exit Button
Program Play-backward Button
Sound Mode Select Button
There are high, normal and low three
kinds of sound modes.
Calendar
Program Scan Button
Lock Setting button
DC Standby Button
Sleep Timer Button
Page 8
Power On and Power Off
Below are methods on how to power on/off the TV set with the switch on the TV and
on the remote control.
Power on/off
Connect/disconnect to the power
1. Connect the power supply wire, then press
Infrared sensor window
Power switch
Menu
V
V-
U
N
E
M
V
A
/
V
T
TV/AV
switch
Volume
up/ down
(F 25F9K) ront and side panel of
Power indicator
+
P
-
P
+
Channel
position up/down
power switch button, the red power indicator will
light, in several seconds the picture will appear
on the screen.
2. If the TV is in the state of standby, press the
button on the remote control.
NOTE
1. You can also press the 0-9
button to call off the standby
status instead of pressing the
DC Standby button. Press the
digit button of the preset channel
(limited to one digit) , you can
complete the selection of channel while you turn on the
TV set( To operate the preset of TV channel, please see
TUNING on page 9-12).
2. When you do not use the remote control, you can
directly press the the button on the television to call off
the standby status.
DC Standby Button
Direct-digit Choosing Button
3. Press the button on the remote control
to get into the standby state.
4. Press the button on the TV set to
completely turn off the TV.
Power supply auto-off function
When the B.B(black background) is set ON,
and there is no signal , game screen protection
works, and ,in15 minutes later, it will change
into standby status.
Page 9
Viewing TV Programs
The channels amount to 218 .
Viewing TV programs
How to select the TV program
1. Use the direct-digit choosing button
Press the button from 0-9 to select a one digit channel.
If you want to select a two-digits channel, press the
Digit Select button and change it into two-digits mode,
then press the number of the channel.
If you want to select a three-digits channel, press the
Digit Select button and change it into three-digits mode,
then press the number of the channel.
If the channel position number you select is larger than 218,
Direct-digit Choosing
button
Digit Select
button
PRE BACK
SYSTEM
the TV will use the first two number as the channel position.
2. Use CH+/- button
Press CH+ to increase the channel position number.
Press CH- to decrease the channel position number.
3. Use PRE button and BACK button
Press PRE button, you can go back to the channels you
viewed (as many as four).
Then, press Back button, you can return to the channels you
were watching just now (as many as four) .
For example, if you have viewed channel 1,2,3,4,5,6 after the
TV is powered on, and the channel you are watching now is
number 7, then press PRE button, you can view channel 6,5,
4,3, and you may press the Back button to return to channel 7.
Choose the proper volume you like
Press VOL+/- button to adjust the volume.
VOLUME
CH+
VOL- VOL+
MENU
CH-
If the color or sound of one channel is abnormal
It might be because the color or sound
system has been set improperly.You may
follow the instruction below to adjust it.
Press SYSTEM button, and you can see
the form.
If the color of the picture is abnormal
Press CH+/- button, and move the indicator to COLOR,
and press VOL+ button to select the proper color(AUTO,PAL,
NTSC4.43 and NTSC3.58 will appear alternately).
Generally, please set to AUTO.
If the sound is abnormal
Press CH+/- button, and move the indicator
to SOUND, and press VOL+/- button to
select the proper sound. (The sound system
of the TV set is BG).
COLOR AUTO
SOUND BG
select adjust
COLOR AUTO
SOUND BG
select adjust
Page 10
Viewing TV Programs(coutinued)
Program scanning function is to let the television automatically scan all
preconcerted channel program(about two seconds per channel).
Program scan and screen display
½ÚÄ¿ä¯ÀÀ¼°ÆÁÄ»ÏÔʾ¹¦ÄÜ
Program scanning function
1. If you want to scan the programs
and select your favorite channel ,
just press the SCAN button, then
SCAN
the television will start scanning
from the present channel with a
rate of two seconds per channel
and until all the preconcerted
programs have been displayed
once, the TV set will return to the
starting channel.
2. If you want to terminate this
function during the scanning, press
the SCAN button again, and the
program will stay at the present channel.
DISP
Screen display
Usually, when you press the DISP button, the channel
number will appear on the top right corner of the screen
and press it again, the channel number will disappear .
Page 11
Tuning
There are three ways of searching: automatic search, manual search and MFT
(manual fine tune).
You may operate it either on the TV or on the remote control. Here is mainly about
the remote control.
Automatic search
Automatic search
1. Press MENU button, then
press VOL+/- button to select
TUNING menu.
CH+
POSITION 1
BAND U
SKIP OFF
SEARCH UP
MFT DOWN
AUTO MEMORY
VOL- VOL+
VOL- VOL+
MENU
CH-
CH+
MENU
CH-
2. Press CH- button to move the
indicator to AUTO MEMORY.
POSITION 1
BAND U
SKIP OFF
SEARCH UP
MFT DOWN
AUTO MEMORY
3. Press VOL+, then
AUTO MEMORYmode will work.
The TV set will search
automatically all available
programs, after that, all
available programs will be
stored in turn and the TV set
will return to the first channel.
ASM VL 0
STOP
If you want to stop the search, just press VOL- button.
The order of the automatic search is due to the frequency
of the program, generally speaking, it is used only at the
first time you search the program, and once the order of
the program has been confirmed, you don't have to use
this function, otherwise the order of the program will be
changed.
After searching
Press CH+/- button to check the channels.
If the color or sound is abnormal in a certain channel, it
may be the color or sound system has not been set properly,
so you should adjust it to the proper system (Reference to
page 7).
Page 12
Tuning(coutinued)
Manual search
Manual search
CH+
1. Press CH+/- button or the Direct-digit Choosing button to
select a channel directly(take channel 1 for example).
VOL- VOL+
MENU
CH-
Direct-digit Choosing
Button
CH+
VOL- VOL+
MENU
2. Press MENU button, then
press VOL+/- button to select
TUNING menu.
3. Press CH- button and move
the indicator to SEARCH.
4. Press VOL+/- button to start
searching.
VOL- button is used to search the
lower frquency channel.
VOL+ button is used to search the
higher frequency channel.
Repeat the steps until you find
the channel you need.
POSITION 1
BAND U
SKIP OFF
SEARCH UP
MFT DOWN
AUTO MEMORY
POSITION 1
BAND U
SKIP OFF
SEARCH UP
MFT DOWN
AUTO MEMORY
POSITION 1
BAND U
SKIP OFF
SEARCH UP
MFT DOWN
AUTO MEMORY
CH-
5. When you plan to store
another new channel at a new
place, use CH+/- button and
move the indicator to
POSITION, then press VOL+/button to select a channel
number and press CH+/- button
to move to SEARCH, then
repeat the fourth step.
POSITION 1
BAND U
SKIP OFF
SEARCH UP
MFT DOWN
AUTO MEMORY
Page 13
Tuning(coutinued)
MFT
MFT(manual fine tune)
CH+
VOL- VOL+
MENU
CH-
Direct-digit Choosing
Button
CH+
VOL- VOL+
MENU
When you can't get a satisfactory picture and audio effect,
you can fine tune to obtain.
1. Press CH+/- button or the
Direct-digit Choosing button
to select a channel directly (take
channel 1 for example).
2. Press MENU button, then
press VOL+/- button to select
TUNING menu.
POSITION 1
BAND U
SKIP OFF
SEARCH UP
MFT DOWN
AUTO MEMORY
3. Press CH+/- button and move
the indicator to MFT.
POSITION 1
BAND U
SKIP OFF
SEARCH UP
MFT DOWN
AUTO MEMORY
CH-
4. Press VOL+/- button repeatedly to fine tune, until the
picture and the sound become satisfactory.
VOL- button is used to search the lower frquency channel.
VOL+ button is used to search the higher frequency channel.
Page 14
Tuning(coutinued)
Skip
Skip
After the programs are presetted, you can skip some
programs so that to select your favorite channels only.
1. Press CH+/- button or
Direct-digit Choosing button to
select a channel directly (take
channel 1 for example).
2. Press MENU button, then
press VOL+/- button to select
TUNING menu.
Direct-digit Choosing
Button
POSITION 1
BAND U
SKIP OFF
SEARCH UP
MFT DOWN
AUTO MEMORY
CH+
VOL- VOL+
MENU
CH-
3. Press CH+/- button and move
the indicator to SKIP.
POSITION 1
BAND U
SKIP OFF
SEARCH UP
MFT DOWN
AUTO MEMORY
4. Press VOL+/- button to set it
ON.
POSITION 1
BAND U
SKIP ON
SEARCH UP
MFT DOWN
AUTO MEMORY
5. Press MENU button to close the menu. When you select
channels with CH+/- button, this channel will be skipped.
However, you can also use the Direct-digit Choosing button on
the remote control to select this channel directly.
If you want to recover the skipped channel
1. Use Direct-digit Choosing button to select the number of the
channel to be recovered.
2. Do the above steps again.
3. Press VOL+/- button to set SKIP OFF.
Page 15
Adjusting the Picture and the Sound
Multiple picture modes
How to select the picture mode
DYNAMIC
P.STD
CH+
VOL- VOL+
MENU
CH-
You may select the mode you want from the
STANDARD
five preset modes and one individual mode.
Press the P. STD button to select a mode you
MILD
like.DYNAMIC PICTURE, STANDARD
PICTURE, MILD PICTURE, MEMORY,
PICTURE MUTE and COLOR MUTE,
totally six picture modes can be selected
MEMORY
PICTURE MUTE
alternately.
COLOR MUTE
MODE
DYNAMIC
STANDARD
MILD
MEMORY
PICTURE MUTE
COLOR MUTE
PICTURE QUALITY
BRIGHT COLOR
MEDIUM COLOR AND BRIGHTNESS
LOW COLOR AND BRIGHTNESS
SET BY YOURSELF
NO PICTURES
BLACK AND WHITE PICTURE
Set the parameter of MEMORY
1. Press MENU button, then
press VOL- button to select
PICTURE menu.
2. Press CH- button, move the
indicator to the option you want
to adjust, then press VOL+/button to do the adjustment.
Then the parameter will be
automatically stored in MEMORY
option.
OPTION
CONTRAST STRONG WEAK
BRIGHT BRIGHT DARK
COLOR THICK LIGHT
SHARP SHARP SOFT
TINT
*The item of TINT appears when the N system signal is received,
and you can adjust it by VOL-/+ button.
VOL+
PURPLE
CONTRAST 100
BRIGHT 50
COLOR 50
SHARP 50
B.B ON
VOL-
GREEN
Page 16
Adjusting the Picture and the Sound
·½±ãµÄͼÏñºÍÉùÒôµ÷Õû¹¦ÄÜ£¨½ÓÉÏÒ³£©
(coutinued)
Multiple Sound Modes and Setting the Speakers
How to select the sound mode
S.STD
You can quickly select you most favored
sound mode from the following three
kinds of modes.
Press the S.STD button to select the
sound quality that you want.NORMAL
VOL,HIGH VOL and LOW VOL can be
selected in turn(their parameter may
be adjusted due to your need).
Setting the sound
This function can let you regulate the volume to the
preconcerted parameter quickly( such as the NORMALVOL,
HIGH VOL or LOW VOL).
1. Press MENU button, then
press VOL- button to select
SOUND menu.
NORMAL VOL
HIGH VOL
LOW VOL
CH+
VOL- VOL+
MENU
CH-
S.STD
2. Press CH- button, move
the indicator to the HIGH
VOL, then press VOL+/button to adjust the parameter
BALANCE 00
LOW VOL 00
NORMAL VOL 00
HIGH VOL 00
you expect. With the same
method, you can adjust the
parameter of the NORMAL
VOL or the LOW VOL.
Suppose the LOW VOL is A, NORMAL VOL is B, HIGH VOL
is C, then that will be:
0 A B C 100
When adjusting the three modes, you should press them in
proper order as HIGH VOL, NORMAL VOL, LOW VOL.
3. Press the S.STD button repeatedly to select the
different sound setting modes.
Setting the speakers
1. Move the indicator to the
BALANCE, then press VOL+
button to increase the volume of
the right speaker(1-50),at the
same time, the volume of left
speaker is decreasing gradually;
you can press the VOL- button
to do the opposite adjustment. When it is set to ,the
volume of the two speakers are equal.
00
Page 17
Adjusting the Picture and the Sound
(coutinued)
S.C.C, count and mute
How to use the S.C.C(soft change channel)
This TV set provides you with the function of S.C. C.
When it is set "ON", the picture will fade in and fade
out when the channel is changed.
CH+
VOL- VOL+
MENU
CH-
1. Press MENU button, then
press VOL+/- button to select
FUNCTION menu.
2. Press CH- button, move
the indicator to the S.C.C,
LANG. ENGLISH
CURTAIN
POS.EX.
S.C.C OFF
AUTO OFF OFF
COUNT 0:00
then press VOL+/- button to
set it ON or OFF.
How to use the COUNT function
This TV set provides you with the function of COUNT,
if you want to know how long your TV set has been
used, you can press MENU button, and find
FUNCTION 2 , then you can know the time the TV has
been on(count from 0 after 100,000 hours).
The time displayed is the total time when you watch the
TV(time of standby status will not be included), the
number cannot be altered through operating by the
remote control or on the TV set.
How to use the MUTE function
When you want to pay attention to the environment or
answer a telephone, or to meet guests, using the mute
function is very convenient.
1. Press button, a sign will
appear at the button left corner
of the screen, and the sound of
the TV set is cut off.
2. In order to recover the sound, press button again
or press VOL+/-button.
Page 18
Setting the Timer
This TV set provides you with three timer functions such as timer on, timer off
and sleep off.
Timer off
Timer off
Using this function can turn the TV set automatically
into standby status at the preconcerted time.
1. Press MENU button, then
CH+
VOL- VOL+
MENU
press VOL+/- button to select
TIMER menu.
OFF TIMER OFF
19:00
ON TIMER OFF
22:00
POS 0
CLOCK 1:40
APPOINTMENT
CH-
CH+
VOL- VOL+
MENU
CH-
2. Press CH- button, move
the indicator to OFF TIMER,
then press VOL+/- button to
set it ONCE , EVERY,or OFF.
3. Press CH- button, move
the indicator to the next
row. Then, press VOL+/button to set the time.
4. Press CH+/- button, move
the indicator to CLOCK,
press VOL+/- button, and you
can set the time(It will be the
standard of the clock of
TIMER ON/OFF).
OFF TIMER ONCE
19:00
ON TIMER OFF
22:00
POS 0
CLOCK 1:40
APPOINTMENT
OFF TIMER ONCE
ON TIMER OFF
22:00
POS 0
CLOCK 1:40
APPOINTMENT
OFF TIMER ONCE
19:30
ON TIMER OFF
22:00
POS 0
CLOCK 1:40
APPOINTMENT
19:30
Page 19
Setting the Timer (coutinued)
Sleep timer and timer on
Sleep timer
Using this function, the TV set can be changed into the
standby status after a period of preset time from when
this function is activated.
1. The utmost time for this function is
120 minutes, and the time interval is
10 minutes.There are totally 12 kinds
of off-time.
2. Press the button repeatedly,
the screen will show in turn as the
right form.
Timer on
When this function is used, the TV set can
automatically turn the power on at the preset time in
the standby status and display the preset program.
CH+
VOL- VOL+
MENU
CH-
1. Press MENU button, then press VOL+/- button to select
TIMER menu.
2. Press CH- button, move
the indicator to the ON
TIMER, then press VOL+/button to set it ONCE ,
EVERY or OFF.
3. Press CH- button, move
the indicator to the below.
Then, press VOL+/- button to
set the time.
OFF TIMER EVERY
19:00
ON TIMER EVERY
22:00
POS 0
CLOCK 1:40
APPOINTMENT
CH+
VOL- VOL+
MENU
CH-
4. Press CH+/- button, move
the indicator to POS 0,
press VOL+/- button to set
the channel with which the
TV is turned on(take 5 for
example).
5. Press CH+/- button, move
OFF TIMER EVERY
19:00
ON TIMER EVERY
22:00
POS 5
CLOCK 1:40
APPOINTMENT
the indicator to CLOCK,
press VOL+/- button, and you can set the time(same as
TIMER OFF and it will be the standard of the clock of
TIMER ON/OFF).
Page 20
Setting the Timer (coutinued)
The channels appointment function can help you conveniently preset as many
as six programs at a time. At the preset time, the TV set will automatically
change to the preconcerted channel. If two or more programs are set in a same
time, the last channel number will be selected.
Channels appointment
Channels appointment
1. Press MENU button, then
CH+
VOL- VOL+
MENU
CH-
CH+
VOL- VOL+
MENU
CH-
DISP
press VOL+/- button to select
TIMER menu.
2. Press CH- button, move
the indicator to CLOCK, press
VOL+/- button, and you can
set the time(same as TIMER
OFF and it will be the standard
of the clock of APPOINTMENT).
3. Press CH+/- button, move
the indicator to
APPOINTMENT, then press
VOL+ button to enter the
sub-menu.
4. Press VOL+/- button to set
the channel number you want
(e.g. 100).
5. Press CH- button to enter
the TIME item. Press VOL+/button to set the time.
Repeatedly press VOL+/- button,
the time changes with a rate of
one minute;
Press the button without
releasing, the time changes with
a rate of ten minutes.
6. Press the CH- button, and
follow the instructions of step
4 and 5, you can do the setting
of the next channel.
7. Press DISP button to exit
the TIMER menu.
At the preset time, the TV set will automatically change
to the preconcerted channel;
This function is available only when the TV set is on, and
it cannot be used in the status of standby or power off.
OFF TIMER EVERY
19:00
ON TIMER EVERY
22:00
POS 0
CLOCK 1:40
APPOINTMENT
APPOINTMENT
.
POS TIME
100 OFF
000 OFF
000 OFF
000 OFF
000 OFF
000 OFF
APPOINTMENT
.
POS TIME
100 OFF
000 OFF
000 OFF
000 OFF
000 OFF
000 OFF
APPOINTMENT
.
POS TIME
100 12:58
000 OFF
000 OFF
000 OFF
000 OFF
000 OFF
Page 21
Setting the other Function
ÆÁÄ»ÓïÑÔ¼°ÆÁÄ»±£»¤¹¦ÄÜÆÁÄ»ÓïÑÔ¼°ÆÁÄ»±£»¤¹¦ÄÜ
Language and screen protection
How to select the language on the screen
Note: The language on the screen of the TV set is
English.
1. Press MENU button, then
CH+
VOL- VOL+
MENU
press VOL+ button to select
the Function menu.
LANG. ENGLISH
CURTAIN
POS.EX.
S.C.C OFF
AUTO OFF OFF
COUNT 0:00
CH-
CH+
VOL- VOL+
MENU
CH-
2. Press CH+/- button, move
the indicator to LANG., then press VOL+button to
select the language and the menu on the screen will
be displayed with the language you select.
Note:You can not adjust the item when there is only one
language OSD.
How to activate the function of screen protection
If no signal has been received
by the TV set,when the B.B
function is set ON, the screen
will change into the form on
the right shows( Game screen
protection ) .
Press MENU button, then
press VOL+ button to select
the PICTURE menu. Then
press CH- button to move the
indicator to B.B, and press
VOL+/- button to set it ON.
CONTRAST 100
BRIGHT 50
COLOR 50
SHARP 50
B.B ON
Page 22
Setting the other Function(continued)
Curtain function,AUTO OFF and calendar display
How to use the Curtain function
This TV set provides three types of Curtain function
for you to select.
CH+
VOL- VOL+
MENU
CH-
CALENDAR
1. Press MENU button, then
press VOL+/- button to select
FUNCTION menu.
2. Press CH+/- button, and
move the indicator to
CURTAIN, then press VOL+
button to select from I, II
LANG. ENGLISH
CURTAIN
POS.EX.
S.C.C OFF
AUTO OFF OFF
COUNT 0:00
and III.
I: curtain
II : fade in and fade out
III: mixed I and II
How to use the AUTO OFF function
When AUTO OFF function is set ON,if you use the timer on
function to turn on the TV but with no operation within 2 hours,
the TV will change to standby mode automatically.
How to use the calendar function
This TV set has been designed to store the calendar
from the year 1901 to 2050.
CH+
VOL- VOL+
MENU
CH-
1. Press the CALENDAR button
and then the calendar will
appear on the screen(Press the
CALENDAR button again to
conceal the display).
2. Press CH+/- button to adjust
the YEAR, press VOL+/- button
to adjust the MONTH.
SU MO TU WE TH FR SA
OCT 2002
Page 23
Setting the other Function(continued)
The function of channel exchange will enable you to exchange any two programs
and you can conveniently adjust the order of the programs due to your own need.
Channel exchange
Channel Exchange
for example, to change between channel1 and 9
CH+
VOL- VOL+
MENU
CH-
Direct-digit Choosing
Button
CH+
1. Press MENU button, then
press VOL+/- button to select
FUNCTION menu.
2. Press CH- button, move
the indicator to POS.EX.,
Then press VOL+ button to
enter the sub-menu.
The number shown in
EX.POS1 and EX.POS2 is the
number of the present channel.
3. Press CH+/- button, move
the indicator to EX.POS2,
then press VOL+ button to set
the channel number to 9.
LANG. ENGLISH
CURTAIN
POS.EX.
S.C.C OFF
AUTO OFF OFF
COUNT 0:00
POS.EX.
EX.POS1 1
EX.POS2 1
EXCHANGE ?
RETURN
POS.EX.
EX.POS1 1
EX.POS2 9
EXCHANGE ?
RETURN
VOL- VOL+
MENU
CH-
4. Press CH+/- button, move
the indicator to EXCHANGE,
then press VOL+ button to
confirm. Then the programs
of the two channel will be
exchanged.
Page 24
Setting the Lock
This TV set provides you with the LOCK function, you can choose it due to your
need to protect your TV set.
Changing your password
Changing your password
This TV set can set a four digit password, the original
one is 0000, if you want to reset it, please follow the
LOCK
CH+
VOL- VOL+
MENU
CH-
instructions below.
1. Press LOCK button, the
screen will show as the form
on the right.
2. Press the 0 button four times,
and enter the menu of LOCK
setting. Press CH+/- button
and move the indicator to
CHANGE PASS. , and press
VOL+ button to enter the
sub-menu of change
password.
LOCK SET UP
PASSWORD ----
LOCK SET UP
CHANGE PW.
TUNING LOCK OFF
PRESET PROG. 3
AV LOCK OFF
GAME LOCK OFF
CHILD LOCK ON
MAX. VOLUME OFF
UNLOCK
Direct-digit Choosing
Button
3. Press the Direct-digit
Choosing button and input a
four-digits password.
4. After inputting the new
password, return to the
original status as shown on
the right form, then, you can
input the new password to
enter the menu of LOCK
setting.
CHANGE PW.
NEW PW. ----
LOCK SET UP
PASSWORD ----
Page 25
Setting the Lock(continued)
Setting the Lock
Setting the Lock
There are SEARCH LOCK,POS LOCK,AV LOCK,
TIMER LOCK and CHILD LOCK five lock setting,you
can set it due to your need.
LOCK
1. Press the LOCK button, the
screen will show as the form
on the right.
LOCK SET UP
PASSWORD ----
Direct-digit Choosing
Button
CH+
VOL- VOL+
MENU
CH-
2. Press the Direct-digit
Choosing button 0 for four
times( or input the password
you set), and enter the menu
of LOCK.
3. Press CH+/- button, move
the indicator to SEARCH
LOCK, then press VOL+
button to set it ON or OFF.
Note:
1.When the TUNING LOCK is set ON, if you want to enter the
TUNING menu,you will have to type the password.
2.The PRESET PROG allows you to turn on the TV always with
one channel.
3.When AV LOCK is set ON, av cannot be used, hence the
screen will change into black and indicate that it has been
locked. The TV set will be in the state of mute.
4.When the GAMEOCK is set ON, you can not play the game.
5.When the CHILD LOCK is set ON, if the buttons on the TV
are pressed, it will indicate that the TV set is in the status of
CHILD LOCK, and the buttons won't work.
6.The MAX VOLUME allows you to set a figure of the top limit of
volume.
7.The UNLOCK allows to you to set all the lock to OFF .
LOCK SET UP
CHANGE PW.
TUNING LOCK OFF
PRESET PROG. 3
AV LOCK OFF
GAME LOCK OFF
CHILD LOCK ON
MAX. VOLUME OFF
UNLOCK
LOCK SET UP
CHANGE PW.
TUNING LOCK OFF
PRESET PROG. 3
AV LOCK OFF
GAME LOCK OFF
CHILD LOCK ON
MAX. VOLUME OFF
UNLOCK
Page 26
Game
This TV set provides you with the SUBMARINE game, after entering the game,
except the buttons that are appointed in the game( for example, the game button,
VOL+/-and CH+/-, etc.)and the DC Stand by button, the other buttons cannot be
used.
Game control buttons and method of playing the game
Game control buttons
Fire button
CH+
VOL- VOL+
MENU
CH-
Used to turn left or right
Used to turn
up or down
MODE
GAME
EXIT
Method of playing the game
1. Press GAME button to start the game.
2. On the screen, the submarine figures in yellow is operated
by you. Press CH+/- and VOL+/- buttons to move the
submarine up, down, left or right to charge the position and
avoid the attacks from submarines (in blue, green and purple)
of enemy. Press MENU or FIRE button on the remote control
to fire. You will get a mark of 100 when you destroy a enemy
submarine or a shell. Specially, when you shoot down a red
submarine appears on the top row, you will get a mark of 1000!
Scores will be filed if the submarine of enemy is destroyed.
To select the background
when playing game
To start/restart the game
To exit game
3. You can press the GAME button to restart the game when it
is GAME OVER or during the process of the game.
Page 27
Connecting Additional Equipments
Connecting additional equipments
You can connect the DVD,VCR and stereo system to the AV output to enjoy a
higher quality of picture and sound effect.
Signal flow
White (Audio left channel)
Red (Cr and audio right channel)
Blue (Cb)
Green (Y)
Yellow (Video)
DVD, VCD or other units
DVD, VCD or other units
Video output
Audio output
ut
p
n
i
O
-VIDE
S
To video input
o
T
To audio input
Laser DVD with output terminal
To audio output
To DVD output
Page 28
Troubleshooting
*To assist in location possible faults use help guide below.
BREAKDOWN PHENOMENON
PICTURE
Picture with snow
Double or Triple Image
Disturb
Normal
No Picture
SOUND
Noise
Normal
Noise
No sound
No sound
The aerial direction and connection
This is called ghosting which can be minimized with
an outside aerial, and good quality cable and
terminations. Altering the aerial direction can also
minimize this effect.
Electrical interference which can be caused by cars,
motorbikes etc, Fluorescent lamps and dirty
insulators on overhead power cables.
Volume Sound mute
Ensure that the power supply is connected to the TV
set and turned on. Also ensure that the TV set is not in
"PICTURE MUTE" or that the brightness and contrast
are not turned down
CHECKING
Adjust color control
No color
Normal volume
Adjust channel again
Scramble
Normal or Weak Volume
Colour Purity fault which can be caused by moving the
TV set, placing magnets near the TV screen or turning
on/off house hold appliances such as vacuumcleaners
Color Spot
Normal volume
near the TV set. Turn the TV off with the mains power
switch for 15 minutes. When the power is turn on again
the TV set will automatically degauss the picture. In
server cases leave the TV set turned off over night.
Note:
1.If the fault can not be repaired using the above guide consult with your local authorized service center.
2.The TV set must only be repaired by a qualified registered service person. Never attempt to remove
the back cover as the TV set has dangerous voltages in side that may cause a fatality or fire.
3. The cabinet may produce the occasional "snapping sound". This is normal and caused by the materials
in the cabinet expanding with room temperature changes.
Page 29
Specifications
The specifications offered you here are only for reference and, with the improvement
of the products ,there may be some different between the description and the practicality.
Model
Color system
Sound system
Picture tube
Sound output power
Power requirements
Power consumption
Size mm
Accessories
25F9K
PAL AV NTSC3.58 NTSC4.43
BG
25"color picture tube
8W+8W
160V-250V 50/60Hz
120W
645 530 540 heightwidth x x (25F9K)depth
645 width x532 depth x540 height 25F3A
Remote control X1
Owner's manual X1
Battery(AA) X2
Warranty card X1
25F3A
NOTE
Design and specifications are subject to change without notice.
The dimension in this manual is a approximation.
Page 30
Page 31
Page 32
01
0090505400
Loading...