Haier 21T6B-TD User Manual

!"# $#%&'(

Using the Remote Control

Buttons and Descriptions

TV and AV Exchange Button To exchanger between TV and

other available video inputs

Mute Button Press to conceal the sound of programs.

Screen Display Button System Adjust Button

Direct-digit Choosing Button Directly select channel numbers Lock Setting button Used for setting lock for channel-

searching, channel,AV and clock,etc.

Picture Mode Select Button There are DYNAMIC, STANDARD,

MILD,MEMORY, PICTURE MUTEand COLOR MUTE six modes of picture.

Menu Select/ Adjust Button Use this button to adjust the menu,

the volume and the channels, as well as to control the game.

Chromaic Belt Length Adjust Button

(this machine has not this function)

Program Play-forward Button Calendar Game Background Select Button

BAR Button(this machine has not this

function)

Fire Button(can call the calendar)

Background Lamp Control Button

(this machine has not this function)

Restart Game Button

Game Exit Button

Program Play-backward Button

Chromatic Belt Width Adjust Button

(this machine has not this function)

Sound Mode Select Button

There are high,normal and low three

kinds of sound modes.

Stopwatch Button

The stopwatch can work 1 hour without interruption and when you use this function,do not operate other function button as well.

Digit Select Button

Change the channel position number

between one digit, two-digits and three

-digits.

Program Scan Button

DC Standby Button

Sleep Timer Button

DISP

LOCK

WID

CALENDAR

BAR

TV/AV

SYSTEM

PRE

MODE

FIRE

CH+

CH-

-/--

BACK

RESTART

FIRE

SCAN

WATCH

S.STDP.STD

VOL+VOL-

HIT

EXIT

LIGHT

Power On and Power Off

Below are methods on how to power on/off the TV set with the switch on the TV and on the remote control.

Power on/off

Connect/disconnect to the power

1.Connect the power supply wire, then press power switch button, the red power indicator will light, in several seconds the picture will appear on the screen.

TV/AV switching

Volume up/ down

Channel position up/down

2. If the TV is in the state of standby, press the button on the remote control.

NOTE

1.You can also press the 0-9 button to call off the standby status instead of pressing the DC Standby button. Press the digit button of the preset channel (limited to one digit) , you can complete the selection of channel while you turn on the TV set( To operate the preset of TV channel, please see TUNING on page 9-12).

2.When you do not use the remote control, you can directly press the the button on the television to call off the standby status.

DC Standby Button

Direct-digit Choosing Button

3. Press the button on the remote control to get into the standby state.

4. Press the button on the TV set to completely turn off the TV.

Power supply auto-off function

When the B.B(black background) is set ON, and there is no signal , game screen protection works, and ,in15 minutes later, it will change into standby status.

Viewing TV Programs

The channels amount to 218(0-218).

Viewing TV programs

How to select the TV program

1.Use the direct-digit choosing button Press the button from 0-9 to select a one digit channel. If you want to select a two-digits channel, press the Digit Select button and change it into two-digits mode, then press the number of the channel. If you want to select a three-digits channel, press the Digit Select button and change it into three-digits mode, then press the number of the channel. If the channel position number you select is larger than 218,

Direct-digit Choosing button

VOL- VOL+

Digit Select button

PRE BACK

SYSTEM

CH+

CH-

the TV will use the first two number as the channel position.

2.Use CH+/- button Press CH+ to increase the channel position number.

Press CH- to decrease the channel position number.

3.Use PRE button and BACK button

Press PRE button, you can go back to the channels you viewed (as many as four).

Then, press Back button, you can return to the channels you

were watching just now (as many as four) .

For example, if you have viewed channel 1,2,3,4,5,6 after the TV is powered on, and the channel you are watching now is number 7, then press PRE button, you can view channel 6,5, 4,3, and you may press the Back button to return to channel 7.

Choose the proper volume you like

Press VOL+/- button to adjust the volume.

If tne VOL STORE is set ON, the volume of the pre-fifty channel will be stored

independently. Press VOL+ to increase the volume, press VOL- to decrease the volume.

If the color or sound of one channel is abnormal

It might be because the color or sound system has been set improperly.You may follow the instruction below to adjust it. Press SYSTEM button, and you can see the form.

If the color of the picture is abnormal

Press CH+/- button, and move the indicator to COLOR, and press VOL+ button to select the proper color(AUTO,PAL, SECAM,NTSC4.43 and NTSC3.58 will appear alternately). Generally, please set to AUTO.

If the sound is abnormal

Press CH+/- button, and move the indicator

to SOUND, and press VOL+/- button to select the proper sound. (BG and DK will appear alternately).

VOLUME

COLOR AUTO

SOUND BG

select adjust

COLOR AUTO

SOUND BG

select adjust

Viewing TV Programs(coutinued)

Program scanning function is to let the television automatically scan all preconcerted channel program(about two seconds per channel).

Program scan and screen display

½ÚÄ¿ä¯ÀÀ¼°ÆÁÄ»ÏÔÊ¾¹¦ÄÜ

Program scanning function

1.If you want to scan the programs and select your favorite channel , just press the SCAN button, then

SCAN

the television will start scanning from the present channel with a rate of two seconds per channel and until all the preconcerted programs have been displayed once, the TV set will return to the starting channel.

2.If you want to terminate this function during the scanning, press the SCAN button again, and the program will stay at the present channel.

DISP

Screen display

Usually, when you press the DISP button, the channel number will appear on the top right corner of the screen and press it again, the screen's top left corner will display the present time( the adjustment of time please see Setting the Timer ).If press it for a third time, the channel number and time will both disappear .

Tuning

There are three ways of searching: automatic search, manual search and MFT (manual fine tune). You may operate it either on the TV or on the remote control. Here is mainly about the remote control.

Automatic search

1. Press MENU button, untill TUNING appears on the screen.

CH+

TUNING

POSITION 1

BAND UHF SKIP OFF SEARCH UP MFT DOWN AUTO MEMORY

VOL- VOL+

CH-

CH+

CH-

2. Press CH+/- button to move the indicator( )to AUTO MEMORY.

TUNING

POSITION 1 BAND UHF SKIP OFF SEARCH UP MFT DOWN

AUTO MEMORY

3. Press VOL+, then AUTO MEMORYmode will work. The TV set will search automatically all available programs, after that, all available programs will be stored in turn and the TV set will return to the first channel.

ASM VHFL 0

STOP

If you want to stop the search, just press VOL- button. The order of the automatic search is due to the frequency of the program, generally speaking, it is used only at the first time you search the program, and once the order of the program has been confirmed, you don't have to use this function, otherwise the order of the program will be changed.

After searching

Press CH+/- button to check the channels. If the color or sound is abnormal in a certain channel, it may be the color or sound system has not been set properly, so you should adjust it to the proper system (Reference to page 7).

Tuning(coutinued)

Manual search

CH+

1. Press CH+/- button or the Direct-digit Choosing button to select a channel directly(take channel 1 for example).

VOL- VOL+

CH-

Direct-digit Choosing Button

CH+

VOL- VOL+

2. Press MENU button, until TUNING appears on the screen.

3. Press CH- button and move the indicator( ) to SEARCH.

4. Press VOL+/- button to start searching. VOL- button is used to search the lower frquency channel. VOL+ button is used to search the higher frequency channel. Repeat the steps until you find the channel you need.

TUNING

POSITION 1

BAND UHF SKIP OFF SEARCH UP MFT DOWN AUTO MEMORY

TUNING

POSITION 1 BAND UHF SKIP OFF

SEARCH UP

MFT DOWN AUTO MEMORY

TUNING

POSITION 1 BAND UHF SKIP OFF

SEARCH UP

MFT DOWN AUTO MEMORY

CH-

5.When you plan to store another new channel at a new place, use CH+/- button and move the indicator( ) to POSITON, then press VOL+/button to select a channel number and press CH+/- button to move to SEARCH, then repeat the fourth step.

TUNING

POSITION 1

BAND UHF SKIP OFF SEARCH UP MFT DOWN AUTO MEMORY

+ 20 hidden pages