Gam e con tro l but ton s and meth od of p lay ing t he ga me..................................................26
Technical operation
and s cre en pr ote cti on .............................................................................................21
2
3
4
11
15
18
24
Con nectin g Add iti ona l Equip men ts .........................................................................................
Others
Tro ubl esh oot ing ........................................................................................................................
Spe cif ica tio ns ............................................................................................................................
27
28
29
Warning and Cautions
1. When you clean the TV set, please
pull out the power plug from AC outlet.
Don't clean the cabinet and the
screen with benzene, petrol and other
chemicals.
2. In order to prolong the using life of
the TV set, please place it on a
ventilated place.
3. Don't place the
TV set in the
sunshine or near
heat source.
4. To prevent the TV set from firing
and electric shock, don't expose the
TV set to rain or moisture.
5. Don't open the back cover,
otherwise it is possible to damage the
components in the TV set and harm
you.
6. When the TV set isn't going to be
used for long time or it is in thunder
and lightening, please pull out the
plug from AC outlet and the antenna
plug from the cover of the TV set.
Explanation on the display tube
In general, it is not needed to clean the tube surface. However, necessary,
it's surface can be cleaned with a dry cotton cloth after cutting off the power.
Don't use any cleanser. If using hard cloth, the tube surface will be damaged.
Installation
Antenna connection
Generally speaking, to enjoy a clearer picture, we recommend that you use a CATV
system or an outdoor antenna .In different places, the suitable antenna type and position
are different.
300 twin-lead cable
Antenna adapter
75 coaxial cable
Plug
(additional purchase)
Note
* It is recommended that you'd better use 75
coaxial cable to remove the
disturbance caused by airwave.
* Don't bind antenna cable and electric wire together.
Preparation for the remote control
Battery installation
Remove the batteries cover.
Insert two size AA batteries matching
the +/-polarities of the battery to the +/marks inside the battery compartment.
Tips for remote operation
The battery life should be about one year
under normal use.
When the remote control will not be used
for a long period of time or when the
batteries are worn out, remove the batteries
to prevent leakage.
Do not throw the batteries into a fire.
Dispose of used batteries in the specified
manner.
Do not drop, dampen or disassemble the
remote control.
Mixer
additional
purchase
Antenna input
75 standard
coaxial type
AC power socket
Position of Keys and Plug-ins
Front and side panel
Signal receiver
Power switch
VIDEO
L/R audio
Power
indicator
TV/AV switch
Menu
Volume down/up
Channel down/up
Menu
TV/AV switch
15F6B
TV/AV switch
Menu
AUDIOHEADPHONE
TV/AV switch
Volume down/up
Volume down/up
VIDEO
Menu
Volume down/up
Channel down/up
Channel down/up
Menu
TV/AV switch
Signal receiver
Power switch
Volume down/up
Channel down/up
Power
indicator
Channel down/up
Signal receiver
L/R audio
Power
indicator
Signal receiver
Power
indicator
VIDEO
Power
indicator
Power switch
Power switch
Power switch
Signal receiver
Position of Keys and Plug-ins
Front and side panel
HT-3768
Power switch
Signal receiver
V+
V-
Volume down/up
Menu
TV/AV switch
P-
P+
Channel down/up
21F7A
AUDIO R/LHEADPHONEVIDEO
MENU
Menu
Power
indicator
TV/AV
TV/AV switch
HT-3728
VIDEO
L/R audio
TV/AV switch
Menu
Note: Please do not use the side and back AV terminals simultaneously.
Volume down/up
Channel down/up
Back panel
Volume down/up
Signal receiver
Power switch
Power
indicator
Power switch
Signal receiver
Channel down/up
Power
indicator
Video output terminal
Video Y input terminal
Video Cb input terminal
S-VIDEO input terminal
Video input terminal
Audio left channel output terminal
ÒôƵ×óÉùµÀÊä³ö¶Ë×Ó
Audio right channel output terminal
Antenna input socket
Video Cr input terminal
ТфЖµУТЙщµАКдИл¶ЛЧУ
Audio right channel input terminal
ÒôƵ×óÉùµÀÊä³ö¶Ë×Ó
ÒôƵ×óÉùµÀÊä³ö¶Ë×Ó
Audio left channel input terminal
Using the Remote Control
Buttons and Descriptions
DISP
P.STD
PRE
MODE
EXIT
VOL-
TV/AV
SYSTEM
FAVORITE
TDX
/
CH+
MENU
CH-
SCAN
SHUTTLE
ZOOM
LOCK
CALENDAR
S.STD
VOL+
BACK
QSET
GAME
TV and AV Exchange Button
To exchanger between TV and
other available video inputs
Mute Button
Press to conceal the sound of programs.
Digit Select Button
Change the channel position number
between one digit, two-digits and three
-digits.
Picture Mode Select Button
There are DYNAMIC, STANDARD,
MILD,MEMORY, PICTURE MUTEand
COLOR MUTE six modes of picture.
Menu Select/ Adjust Button
Use this button to adjust the menu,
the volume and the channels, as well
as to control the game.
Program Play-forward Button
Favorite program button
Game Background Select Button
No available
Game Exit Button
No available
No available
Start/Restart Game Button
Change the aspect ratio
Saving mode on/off button
Shuttle button
Program Play-backward Button
Sound Mode Select Button
Calendar
Program Scan Button
Lock Setting button
DC Standby Button
Sleep Timer Button
Power On and Power Off
Below are methods on how to power on/off the TV set with the switch on the TV and
on the remote control.
Power on/off
Connect/disconnect to the power
1. Connect the power supply wire, then press
power switch button, the power indicator will
light, in several seconds the picture will appear
on the screen.
2. If the TV is in the state of standby, press the
button on the remote control.
NOTE
1. You can also press the 0-9
button to call off the standby
status instead of pressing the
DC Standby button. Press the
digit button of the preset channel
(limited to one digit) , you can
complete the selection of channel while you turn on the
TV set( To operate the preset of TV channel, please see
TUNING on page 11-14).
2. When you do not use the remote control, you can
directly press the CH+/- button on the television to
call off the standby status.
DC Standby Button
Direct-digit Choosing Button
3. Press the button on the remote control
to get into the standby state.
4. Press the button on the TV set to
completely turn off the TV.
Power supply auto-off function
When the is set ON,
and there is no signal , screen protection
works, and ,in15 minutes later without any
operation, it will change into standby status.
B.B(black background)
Viewing TV Programs
The channels amount to 218 .
Viewing TV programs
How to select the TV program
1. Use the direct-digit choosing button
Press the button from 0-9 to select a one digit channel.
If you want to select a two-digits channel, press the
Digit Select button and change it into two-digits mode,
then press the number of the channel.
If you want to select a three-digits channel, press the
Digit Select button and change it into three-digits mode,
then press the number of the channel.
If the channel position number you select is larger than 218,
Direct-digit Choosing
button
Digit Select
button
PREBACK
SYSTEM
the TV will use the first two number as the channel position.
2. Use CH+/- button
Press CH+ to increase the channel position number.
Press CH- to decrease the channel position number.
3. Use PRE button and BACK button
Press PRE button, you can go back to the channels you
viewed (as many as four).
Then, press BACK button, you can return to the channels you
were watching just now (as many as four) .
For example, if you have viewed channel 1,2,3,4,5,6 after the
TV is powered on, and the channel you are watching now is
number 7, then press PRE button, you can view channel 6,5,
4,3, and you may press the Back button to return to channel 7.
Choose the proper volume you like
Press VOL+/- button to adjust the volume.
VOLUME
CH+
VOL-VOL+
MENU
CH-
If the color of one channel is abnormal
It might be because the color has been
set improperly.You may follow the
instruction below to adjust it. Press
SYSTEM button, and you can see
the form.
If the color of the picture is abnormal
Press CH+/- button, and move the indicator to COLOR,
and press VOL+/- button to select the proper color(AUTO,
NTSC3.58,NTSC4.43 and PAL will appear alternately).
Generally, please set to AUTO.
If the sound is abnormal
Press CH+/- button, and move the indicator to SOUND,
and press VOL+/- button to select the proper color(DK,
I,BG and M will appear alternately).
COLOR AUTO
SOUND DK
SELECTADJUST
Loading...
+ 22 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.