Game
Game control buttons and method of playing the game
Technical operation
Connecting Additional Equipments
Connecting additional equipment
Others
Troubleshooting
Specifications
Warning and Cautions
1. When you clean the TV set, please
pull out the power plug from AC outlet.
Don't clean the cabinet and the
screen with benzene, petrol and other
chemicals.
2. In order to prolong the using life of
the TV set, please place it on a
ventilated place.
3. Don't place the
TV set in the
sunshine or near
heat source.
4. To prevent the TV set from firing
and electric shock, don't expose the
TV set to rain or moisture.
5. Don't open the back cover,
otherwise it is possible to damage the
components in the TV set and harm
you.
6. When the TV set isn't going to be
used for long time or it is in thunder
and lightening, please pull out the
plug from AC outlet and the antenna
plug from the cover of the TV set.
Explanation on the display tube
In general, it is not needed to clean the tube surface. However, necessary,
it's surface can be cleaned with a dry cotton cloth after cutting off the power.
Don't use any cleanser. If using hard cloth, the tube surface will be damaged.
Installation
Antenna connection
Generally speaking, to enjoy a clearer picture, we recommend that you use a CATV
system or an outdoor antenna .In different places, the suitable antenna type and position
are different.
300 twin-lead cable
Antenna adapter
75 coaxial cable
Plug
(additional purchase)
AC power socket
Mixer
additional
purchase
Antenna input
75 standard
coaxial type
Note
* It is recommended that you'd better use the 75
coaxial cable to remove the
disturbance caused by airwave.
* Don't bind antenna cable and electric wire together.
Preparation for the remote control
Battery installationTips for remote operation
Remove the batteries cover.
Insert two size AA batteries matching
the +/-polarities of the battery to the +/marks inside the battery compartment.
When the remote control will not be used
for a long period of time or when the
batteries are worn out, remove the
batteries to prevent the leakage.
Do not throw the batteries into fire.
Dispose of used batteries in the specified
manner.
Do not drop, dampen or disassemble the
remote control.
Position of Keys and Plug-ins
Front panel
21F9K/21F3A/21T3A
R/L
audio
Video
Menu
TV/AV
switch
Volume
up/ down
Channel
position up/down
21F9D/21T9D
Menu
TV/AV switch
TV/AV
switch
Menu
Volume down/up
Volume
up/ down
Channel down/up
Channel
position up/down
21FA1(D)/21TA1-BG
NOTE:
1 Please do not use the side and back AV terminals simultaneously.
2 The side AV is optional and the silk-screen may be adjust without notice.
Power indicator
Signal receiver
Power switch
Back panel
21F9K/21T3A/21F3A
Video output terminal
Video Y input terminal
S-VIDEO input terminal
Video input terminal
Signal receiver
Power
switch
21F3A/
21T3A
Signal receiver
Signal receiver
Power
indicator
Audio output terminal
Antenna input socket
Video Cr input terminal
Video Cb input terminal
Audio input terminal
Power
switch
VIDEO
L/R audio
21F9K
Power indicator
Power indicator
Power
switch
21F9D/21T9D/21FA1/21TA1(D)-BG
Video output terminal
Video Y input terminal
Video input terminal
Audio output terminal
Antenna input socket
Video Cr input terminal
Video Cb input terminal
Audio input terminal
Using the Remote Control
Buttons and Descriptions
DISP
P.STD
PRE
MODE
LIGHT
VOL-
TV/AV
SYSTEM
I/II
CH+
MENU
CH-
SCAN
LOCK
CALENDAR
S.STD
VOL+
BACK
EXIT
GAME
TV and AV Exchange Button
To exchange between TV and
other available video inputs
Mute Button
Press to conceal the sound of programs.
Digit Select Button
Change the channel position number
between one digit, two-digits and three
-digits.
Picture Mode Select Button
There are DYNAMIC, STANDARD,
MILD,MEMORY, PICTURE MUTEand
COLOR MUTE six modes of picture.
Menu Select/ Adjust Button
Use this button to adjust the menu,
the volume and the channels, as well
as to control the game.
Program Play-forward Button
I/II Button
Used for setting the acoustics. There are
SURROUND OFF,SOURROUND MONO,
SURROUND STEREO1,SURROUND STEREO
2 four kinds of sound modes.
Game Background Select Button
Background Lamp Control Button
(not available)
Restart Game Button
Game Exit Button
Program Play-backward Button
Sound Mode Select Button
There are THEATER,NEWS,MUSIC and
PERSONAL four kinds of sound modes.
Calendar
Program Scan Button
Lock Setting button
DC Standby Button
Sleep Timer Button
Power On and Power Off
Below are methods on how to power on/off the TV set with the switch on the TV and
on the remote control.
Power on/off
Connect/disconnect to the power
1.Connect the power supply wire, then press the
Power Switch button and the red power indicator
will light, in several seconds the picture will appear
on the screen.
2. If the TV is in the state of standby, press the
button on the remote control.
NOTE
1.You can also press the 0-9
button to call off the standby
status instead of pressing the
DC Standby button. Press the
digit button of the preset channel
(limited to one digit) , you can
complete the selection of channel while you turn on the
TV set( To operate the preset of TV channel, please see
TUNING on page 9-12).
2.When you do not use the remote control, you can
directly press the the button on the television to call off
the standby status.
DC Standby Button
Direct-digit Choosing Button
3. Press the button on the remote control
to get into the standby state.
4. Press the button on the TV set to
completely turn off the TV.
Power supply auto-off function
When the B.B(black background) is set ON,
and there is no signal , screen protection
works, and ,in 15 minutes later, it will change
into standby status.
Viewing TV Programs
The channels amount to 218.
Viewing TV programs
How to select the TV program
1.Use the direct-digit choosing button
Press the button from 0-9 to select a one digit channel.
If you want to select a two-digits channel, press the
Digit Select button and change it into two-digits mode,
then press the number of the channel.
If you want to select a three-digits channel, press the
Digit Select button and change it into three-digits mode,
then press the number of the channel.
If the channel position number you select is larger than 218,
Direct-digit Choosing
button
Digit Select
button
PREBACK
SYSTEM
the TV will use the first two number as the channel position.
2.Use CH+/- button
Press CH+ to increase the channel position number.
Press CH- to decrease the channel position number.
3.Use PRE button and BACK button
Press PRE button, you can go back to the channels you
viewed (as many as four).
Then, press Back button, you can return to the channels you
were watching just now (as many as four) .
For example, if you have viewed channel 1,2,3,4,5,6 after the
TV is powered on, and the channel you are watching now is
number 7, then press PRE button, you can view channel 6,5,
4,3, and you may press the Back button to return to channel 7.
Choose the proper volume you like
Press VOL+/- button to adjust the volume.
Press VOL+ to increase the volume, press
VOL- to decrease the volume.
VOLUME
CH+
VOL-VOL+
MENU
CH-
If the colour of one channel is abnormal
It might be because the colour system
has been set improperly.You may
follow the instruction below to
adjust it. Press SYSTEM button, and
you can see the form.
If the colour of the picture is abnormal
Press CH+/- button, and move the indicator to COLOR,
and press VOL+ button to select the proper colour. (AUTO,PAL,
NTSC4.43 and NTSC3.58 will appear alternately.) Generally,
please set to AUTO.
COLOR AUTO
SOUND BG
SELECT ADJUST
Viewing TV Programs(continued)
Program scanning function is to let the television automatically scan all
preconcerted channel program(about two seconds per channel).
Program scan,screen display and ZOOM
½ÚÄ¿ä¯ÀÀ¼°ÆÁÄ»ÏÔʾ¹¦ÄÜ
Program scanning function
1.If you want to scan the programs
and select your favorite channel ,
just press the SCAN button, then
SCAN
the television will start scanning
from the present channel with a
rate of two seconds per channel
and until all the preconcerted
programs have been displayed
once, the TV set will return to the
starting channel.
2.If you want to terminate this
function during the scanning, press
the SCAN button again, and the
program will stay at the present channel.
DISP
Screen display
Usually, when you press the DISP button, the channel
number will appear on the top right corner of the screen;
when you press again,the current time and the count time
will appear on the top left and the down left corner of
the screen.It will disappear about 5 seconds later,In other
way ,you can press the DISP button to conceal the function.
ZOOM
This function can change the
extent of the picture.
Press MENU and CH+/- to select
ZOOM, and VOL+ to select
among NORMAL/ZOOM IN/16:9.
AA
BB
CC
SELECT ADJUST
PICTURE
ADJUST
TDX ON
ZOOM NORMAL
B.B ON
84.13MHZ
Loading...
+ 20 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.