Haier 21FV6T User Manual

Download

0090507220

21FV6T

Color Television

Operation Instructions

MAIN FUNCTION

◆218 Programs stored

◆Dynamic noise reduction

◆Multi-picture modes

◆Auto-correcting black balance

CONTENTS

WARNING AND CAUTIONS...............................................................................................................1

BASIC FEATURE..................................................................................................................................2

TECHNICAL SPECIFICATION............................................................................................................2

FUNCTION BUTTONS AND EXTERNAL SOCKETS.......................................................................3

REMOTE CONTROLLER BOARD......................................................................................................5

OPERATION MENU..............................................................................................................................6

MULTI FUNCTION TIMER.................................................................................................................9

PROGRAM NUMBER EXCHANGE...................................................................................................10

GENERAL OPERATION.......................................................................................................................11

TELETEXT FUNCTION(FAST TEXT)................................................................................................13

EXTERNAL CONNECTIONS..............................................................................................................15

TROUBLESHOOTING GUIDE............................................................................................................16

WARNING AND CAUTIONS

BASIC FEATURE

1. When you clean the TV set, please pull out the power plug from AC outlet. Or may result in electric shock, fire or damage to the TV set. Don't clean the cabinet and the screen with benzene, petrol and other chemicals.

2. In order to prolong the using life of the TV set, please place it in a well ventilated location.

3. Don't place the TV set in direct sunlight or near heat source.

4. Do not place the TV set near rain or moisture as it may cause an electric shock, or the TV set to catch fire. The TV set must only be used in dry indoor location.

5. The back cover must only be removed by a registered electrical service person. Removing the back cover may result in electric shock, fire or damage to the TV set.

6. If the TV set is not going to be used for long time, or there is a severe thunder & lightening storm, it is recommended that the TV set be disconnected from the AC power outlet and the aerial plug removed.

●218 programs stored

●Auto-correcting black balance

●Blue extension, green improvement

●Multi-picture modes

●Audio/Video input, S-Video input

●DVD component input

TECHNICAL SPECIFICATION

POWER SUPPLY: See rating plate TV SYSTEM: B/G COLOUR SYSTEM: PAL NTSC3.58/4.43 (AV) CRT: 21"

AERIAL INPUT IMPEDANCE: 75Ωunbalanced VIDEO INPUT: 1.0VP-P(75Ω) AUDIO INPUT: 436mVrms(40KΩ) VIDEO OUTPUT: 1.0VP-P(75Ω) AUDIO OUTPUT: 436mVrms(>600Ω)

AUDIO MAX OUTPUT POWER: 3W POWER CONSUMPTION: See rating plate NET WEIGHT(kg): 24 NET DIMENSION(mm): 584×477×459

Explanation on the display tube

When the picture tube requires cleaning, please disconnect the power and use a dry soft cotton cloth. Do not use any cleaner or abrasive cloth.

1 2

Supplied accessories: Infrared remote control handset 1 Battery(AA) 2 Operating instructions 1 Design and specifications are subject to change without notice.

FUNCTION BUTTONS AND EXTERNAL SOCKETS

Antenna

Figure A Figure B

75-300Ω

Antenna adapter

Antenna cable with a plug

Figure C

Coaxial cable(75Ω) twin-lead cable(300Ω)

Antenna feeder

Figure D

Antenna Connection

Connect an antenna to the antenna socket on the TV set,we recommend using a Cable TV system for better picture and audio quality.

1.If you use a coaxial cable(75 ),insert the antenna plug (see figure C) into 75 socket (see figure A).

2.If you use a twin-lead cable(300 ),please shape the cable as figure D,and connect the leads to antenna adapter and then insert the antenna adapter into the 75 socket.(see figure B)

Power source wire connection Insert the power plug into AC outlet. To install and to replace batteries of the remote control unit

1.Place the remote control unit with the face down, then open the battery cover of the unit.

2.Place the two"AA"size batteries, matching the + and - signs on each battery to the + and -signs of the battery compartment.

3.Close the cover of the battery compartment. NOTE: (1)Don't drop or wet or dismantle the unit. (2)If you don't intend to use the unit for a long period or the electricity of the batteries is used up, remove the batteries to prevent batteries acid from leaking into the battery compartment. (3)Always replace both batteries at the same time. (4)Do not use rechargeable batteries (Ni-cd) or mix battery types. (5)Never place batteries in a fire. Dispose of the batteries with your domestic rubbish collection.

1.Front panel

(1)Remote sensor: let the remote controller aim here, the TV set can receive remote control signal. (2)Power switch: press the button to turn on the TV set ,press the button again to turn off the TV set. (3)Power indicator: the indicator lights in standby status .The indicator glints when you use remote controller. (4)Menu button (5)Program up/down button (6)Volume up/down button (7)TV/AV switch button

2. Audio and video rear connections

(1) S-VIDEO input (2) AUDIO/VIDEO input (3) YUV-DVD component input (4) Antenna input (5) AUDIO/VIDEO output

S-VIDEO

VIDEO

AUDIO

(2)

(3)

(1)

(4) (7)

TV/AV

- +VOL

-CH+

(5) (6)

VIDEO

AUDIO

OUT

(4)

(1) (2) (3)

(5)

REMOTE CONTROLLER BOARD

OPERATION MENU

FUNCTION DESCRIPTION

PROGRAM SCAN STANDBY

SWAP PROGRAM BETWEEN THE PRESENT AND THE LAST

MUTE

AL D

TV/VIDEO SELECTION VOLUME CONTROL CHANNEL NUMBER UP/DOWN PICTURE MENU SOUND MENU TIME MENU

FUNCTION MENU

ONE DIGIT SELECTION ONE OR TWO OR THREE DIGITS PRE-SELECTION MENU DISPLAY

EXIT MENU DISPLAY

INVALID BUTTON PICTURE MODE SELECTION

INVALID BUTTON

TUNE MENU SELECTION

I R

-/-

U TI

MARK

S A

W P

- I

C H

F TU

OOM

CLAL

.SD

V +

TI N

E U

SWAP

TV/AV

-VOL+

-CH+

PICTURE

SOUND TIME

FUNCTION

0-9

-/--

I-

TELETEXT SUBTITLE

TV/TELETEXT ENTERING/EXITING

TO REVEAL CONCEALED TELETEXT TELETEXT ZOOM TELETEXT PAGE HOLD

TELETEXT/TV MIX MODE TV/TELETEXT ALTERATION

TIME DISPLAY(IN TV MODE)/SUBCODE SWITCH

EAST/WEST

NOTE： Use CH+/- or VOL+/ -buttons, either on the remote controller or on the front panel of the television to navigate menus and to select menu options.

Setting Channels

1.Entering and exiting menus Press MENU button on the remote controller once (or directly press PICTURE button on the remote controller),PICTURE menu displays on the screen; press MENU button twice (or directly press SOUND button on the remote controller), SOUND menu displays on the screen. Press the menu button again (3 times, or directly press TIME button on the remote controller), TIME menu displays

TUNING COLOR AUTO SOUND B/G BAND VHFL SKIP OFF PROGRAM 19 SEARCH FINE TUNE AUTO SEARCH

on the screen. Press the menu button again (4 times, or directly press FUNCTION button on the remote controller), FUNCTION menu displays on the screen. Press the menu button again (5 times or directly press TUNE button on the remote controller), TUNE menu displays on the screen. Press the menu button again (6 times), EXCHANGE menu displays on the screen .To turn off the on-screen menu display, either press the EXIT button or allow the TV set to automatically turn off the menu by not pressing any button for a few seconds.

2.Auto search A. Press MENU button five times (or directly press TUNE button on the remote controller), e

nsure that the TUNING menu is displayed. Press the CH+/- buttons to select AUTO SEARCH. Then press the VOL+ button, the TV set will begin to search programs from present programme No.. B. After the search has finished, the TV set will return to the first program that is stored.

3.Search Press MENU button five times (or directly press TUNE button), ensure that the TUNING menu is displayed. Press the CH+/- buttons to select SEARCH. Then press the VOL+ button to search up or VOL- button to search down to the next TV station.(It is much faster to search up.) If the wrong station is found, press the search item again. You may need to repeat this until the correct station is located. To store the new program, press the EXIT button.

4.Fine tune If the picture or sound is poor, try to use the FINE TUNE feature. Select the FINE TUNE by using the CH +/- buttons. Use the VOL +/- buttons to fine tune the sound and picture for optimum results. Then press the EXIT button to store the results. Do not use this feature unless reception is poor.

5.Selecting the sound system Press the CH+/- buttons to select SOUND item. Then press the VOL+/- buttons to select a sound system you need.

6.Selecting the color system Usually this should be set in the auto position. However if the colors displayed on the screen

are incorrect you can manually select the correct color system. When you have finished remember to turn it back to auto again so that other programs will still work correctly. Use the CH+/- buttons to select COLOR then the VOL+/- buttons to select a color system

you need. Press the EXIT button to save the setting.

OPERATION MENU

7.Program skip The program skip feature enables you to skip/hide programs that you do not wish to be displayed when using the CH+/- buttons. These channels will still be displayed by directly using the channel number buttons on the remote controller. To skip , press the CH+/- buttons to select the SKIP menu, press the VOL+/- buttons to tune the skip feature on/off. Press the EXIT button to save the setting.

8.Program number The program number is the remote control channel number. You can change the program number to see channels stored without exiting this main menu. Press the CH+/- buttons to select PROGRAM, press the VOL+/- buttons to change the program number that you are adjusting.

9.Band switching (Note: This is a new item.) If you already know what band the channel is on, tuning can speed up by selecting the correct band before going into the search menu. This feature should only be used if you understand the channels in your local area.

OPERATION MENU

Sound Adjustments

Press the menu button twice or press the SOUND button on the remote controller, to display the sound setting menu.

Volume (adjust the loudness level) Press the CH+/- buttons to select VOLUME, then press the VOL+/- buttons to adjust the volume level.

Function Menu

SOUND VOLUME 50

IIIIIIIIIIIIIIIIIIIIIIIII..........

Picture Adjustments

Press the MENU button once or press the PICTURE button on the remote control to display the Picture setting menu.

1.Contrast (adds depth to the picture) Press the CH+/- buttons to select CONTRAST, then press the VOL+/- buttons to adjust the contrast level.

PICTURE CONTRAST 89 BRIGHTNESS 66 COLOUR 50 SHARPNESS 50 BLACK STRETCH OFF

IIIIIIIIIIIIIIIIIIIIIIIII..........

2.Brightness (adds sparkle and shine to the picture) Press the CH+/- buttons to select BRIGHTNESS, then press the VOL+/- buttons to adjust the brightness level.

3.Color (adds color depth) Press the CH+/- buttons to select COLOR, then press the VOL+/- buttons to adjust the color level.

4.Sharpness (adds fine detail) Press the CH+/- buttons to select SHARPNESS, then press the VOL+/- buttons to adjust the sharpness level. Note: Do not turn the sharpness up to high if the reception is poor or has lots of noise as it will enhance the fine grain details.

5. Black stretch (adds deeper blacks and increases the contrast range) Press the CH+/- buttons to select BLACK STRETCH, then press the VOL+/- buttons to turn this feature on/off.

6.Hue Press the CH+/- buttons to select HUE, then press the VOL+/-buttons to adjust the hue level. Note: Hue is only used in the AV mode.

7 8

1.Background (If the signal is very poor or there is no input signal the picture will mute to black.) Press the CH+/- buttons to select BACKGROUND, then press the VOL+/- buttons to turn this feature on/off.

FUNCTION ENGLISH BACKGROUND ON NOISE REDUCE OFF FADE ON CHILD LOCK OFF AVL OFF CALENDER

2.Noise reduce (Picture Noise & Grain reduction circuit) Press the CH+/- buttons to select NOISE REDUCE, then press the VOL+/- buttons to turn this feature on/off.

3.Fade The FADE control allows time for the picture tube to warm up and gently turned on, which can help prolong the life of the picture tube.

4.Child lock (enables the TV front control buttons to be locked) Press the CH+/- buttons to select CHILD LOCK, then press the VOL+/ buttons to turn this feature on/off.

5.AVL (Automatic Volume Limit control reduces effect of large volume changes such as when the ads come on.) Press the CH+/- buttons to select AVL, then press the VOL+/- buttons to turn this feature on/off.

6.Calendar (enables the TV sets internal calendar to be set) Press the CH+/- buttons to select CALENDAR, then press the VOL+/ buttons to select the item to be changed and the CH+/- buttons to alter each setting.

MULTI FUNCTION TIMER

Multi Function Timer

The TV set has in built a comprehensive timer that has five basic functions.

1.Clock

2.On time so that the TV set can be programmed to turn on at a certain time.

3.Off time to allow the TV set to turn off at the preset time.

4.Sleep timer to allow the TV set to turn off after

TIME

CLOCK --:--

ON TIME --:--

ON-PROG 1

OFF TIME --:--

SLEEP TIMER - -:--

REMIND TIME

REMIND PROG 1

--:--

10 ~ 180 minutes.

5.Program remind timer, that displays an on screen reminder prompt, when a program on a different channel is due to start.

Note: The clock will only work in the TV set if left turned on or in standby. When the set is disconnect from the power supply or is turned off by the main power switch on the front panel, the clock looses power and will need to be reset when the power is reconnected.

Selecting the clock menu Press the MENU button continually until theTIME menu is displayed or press the yellow time button on the remote controller.

1.Clock (master timer clock) Press the CH+/- buttons to select CLOCK, then press the VOL+/- buttons to adjust the hour. Press the CH- button to select minute and the VOL +/- buttons to adjust the minute.

2.On time Press the CH+/- buttons to select ON TIME, then press the VOL+/- buttons to adjust the hour. Press the CH- button to select minutes and the VOL+/- buttons to adjust the minutes. Press the CH- button to select ON PROG and the VOL+/ buttons to select the TV channel that the TV set will automatically turn on to.

3.Off time Press the CH+/- buttons to select OFF TIME, then press the VOL+/- buttons to adjust the hour. Press the CH- button to select minute and the VOL+/- buttons to adjust the minute.

4.Sleep timer Press the CH+/- buttons to select SLEEP TIMER, then press the VOL+ button

to adjust the amount of time before the TV set will automatically turn off. Each time the VOL+ button is pressed the sleep time will increase by 10 minutes. The maximum sleep time is 180 minutes.

5.Remind time Press the CH+/- buttons to select REMIND TIME, then press the VOL+/- buttons to adjust the hour. Press the CH- button to select minute and the VOL +/- buttons to adjust the minute. Press the CH- button to select REMIND PROG and the VOL +/- buttons to select

the TV channel that the TV set will automatically remind you to turn to while watching another channel.

PROGRAM NUMBER EXCHANGE

Program Number Exchange

This feature enables TV programs that may be on a wrong TV channel number to be swapped/exchanged. This feature is very useful when Automatic Search Tuning has been used, to reallocate the found programs to the correct channel numbers.

Press the MENU button 6 times until the exchange menu is displayed. Press the CH+/- buttons until program 1 is selected. Use the VOL+/- buttons to select the channel number to be swapped. (I.E If you wish to exchange channel 2 and 4 PROG1 should = 2.) Press the CH+/- buttons until program 2 is selected. Use the VOL+/- buttons to select the channel number to be swapped. (I.E If you wish to exchange channel 2 and 4 PROG 2 should = 4.) Press the CH+/- buttons until EXCHANGE is selected. Press the VOL+ button to enable the exchange.

EXCHANGE PROG 1 1 PROG 2 1 EXCHANGE

GENERAL OPERATION

1.Channel changing (218 possible channels) Use either the CH+/- buttons on the remote controller or the front panel of the TV set to change the channels. Or directly enter the channel number with the numeric button on the remote controller.

Press repeatedly the [-/--] button to select the appropriate number of digits for the next program number that you want to watch. The on screen indication will change sequentially between one digit (-) for 0 to 9, two digits (- -) for 10 to 99 and 3 digits (- - -) for 100 to 218 input selection. After selecting the number of digits, simply press the numeric keys for the desired program number. For example, to select program 34, press the button [- / - -] until the on screen indication shows (- -), then press 3 and finally 4.

2.Volume adjustment Press the VOL+/- buttons on the remote controller or the front of the TV set to adjust the volume level. The range is 0~100. When the volume buttons are pressed, the volume level is displayed automatically on the TV screen.

3.Standby Using the remote controller the TV set can be placed into standby mode.

Standby mode must be used when the timer has been set to turn on the television automatically.

set is placed into standby. To turn the TV set back on again, press standby button on the remote controller again. It will take a few seconds before a picture is displayed.

4.Mute Press the MUTE button on the remote controller to mute the TV set’s sound. Pressing the MUTE button again will turn the sound back on.

5.Preset picture modes Our engineers have designed in 5 commonly used picture settings to allow fast picture level selection depending on what type of TV program is showing. Each mode is selected in turn by pressing the "P. STD" button on the remote controller. The 5 modes are: Listen- This is a new feature that blacks out the TV screen when listening to music only channels. Soft - Designed for night time low light viewing. Standard - Designed for rooms that have good all round lighting. Rich - Designed for rooms with high ambient lighting such as daytime sport. User- A spare setting that can be adjusted to personal tastes.

A red standby light will glow on the TV front panel when the TV

6.Recall (On-screen Display) The CALL button on the remote controller allows the on screen menu to be displayed, showing the channel numbers and colour system and sound system.

7.Program scan (Automatically increments/scans the channels and displays each channel for a short time.) The SCAN button on the remote controller turns on/off the scan feature.

8.Channel swap (toggles between the last channel view and the current channel) Each time the SWAP button is pressed, the last channel view is displayed.

9.AV input selection Each time the TV/AV button is pressed, the input selection will cycle among TV- AV- SVHS- DVD- TV. Notes: I.Back AV & SVHS share the same back AV audio input. Ⅱ.In AV modes the RECALL status display will only display the colour system. III.Back AV and side AV can not be used at the same time, the back AV has priority when you use.

All the 5 modes can be independently adjusted by using the PICTURE adjustment menu.

TELETEXT FUNCTION (FAST TEXT)

1.TV/Teletext Button (Turns the Teletext feature On/Off) [ ] Press the [ ] button on the remote control to turn teletext On/Off. To select a teletext page either directly enter the page number using the numeric key pad on the remote control or use the CH+/- buttons, or the coloured Fast Text buttons.

TELETEXT FUNCTION (FAST TEXT)

8.Subtitle [ ] Pressing the [ ] button will get the teletext decoder to automatically search for the subtitle page.

2.Mix Mode [ ] While in Teletext mode press the [ ] and will show the teletext data superimposed on top of the TV picture. Press the button again to revert back to Full text.

3.Cancel Mode [ ] This feature allows the TV picture to be displayed while next page to be searched is entered and found. Only the top teletext line is displayed until the page is found. Press the [ ] button to hide the teletext information. Either press the [ ] (Cancel button) or the [ ] (Text button) to exit the cancel display mode.

4.Language Mode [ ] Pressing the [ ] button will change the Teletext characters between Eastern and Western.

5.Hold [ ] Pressing the [ ] button will stop the teletext page automatically updating. This feature is very useful where there are several teletext pages on the same page number.

6.Size [ ] Pressing the [ ] button changes between full screen top half bottom and half full screen. This feature is very useful as it magnifies the image making the characters easier to read.

9.Time [ ]

While in normal TV mode only, pressing the [ ] button will display the teletext time in the top right hand corner for a few seconds. In teletext mode, the button can be used as subcode switch.

10.Fast text coloured buttons

Fast text automatically displays the four most commonly used pages that the broadcaster thinks that you may want to choose next. Press the same coloured button on the remote as the coloured link at the bottom of the teletext page to go directly to that page.

7.Reveal [ ] Pressing the [ ] button will reveal hidden text. This feature is used to reveal information such as answers to teletext on-line interactive puzzles.

EXTERNAL CONNECTIONS

Direction of signal

white（left audio）

red（C /right audio ） blue（C ）

green

yellow

OUT

VIDEO

AUDIO

tpu u o

o e tT d

vi s o -

W R

VCR (without S-VIDEO terminal)

W R

S-VIDEO

VCR (with S-VIDEO terminal)

Note:

1.When receives s-video signal, you must remove video signal; when receive video signal, you must remove s-video signal.

2.When receive front video signal, you must remove back video signal; when receive back video signal, you must remove front video signal.

tput uTo

o e o d

（Y）

（video）

DVD(with DVD component)

T a o d

u i

G R

o u o

TROUBLESHOOTING GUIDE

To assist in location possible faults use help guide below:

BREAKDOWN PHENOMENON

PICTURE

SOUND

the aerial direction and connection

Picture with Snow

Double or Triple Image

Disturb

Normal

No Picture

Noise

Normal

Noise

No Sound

This is called ghosting which can be minimized with an outside aerial, and good quality cable and terminations. Altering the aerial direction can also minimize this effect.

Electrical interference which can be caused by cars, motorbikes etc, fluorescent lamps and dirty insulators on overhead power cables.

Ensure that the power supply is connected to the TV set and turned on. Also ensure that the TV set is not in "Listen Mode" or that the brightness and contrast are not turned down.

adjust color control

T o

c o n o m

p o e

u t

No Color

Scramble

Color Spot

Note:

1.If the fault can not be repaired by using above guide consult with your local authorized service center.

2.The TV set must only be repaired by a qualified registered service person. Never attempt to remove the back cover as the TV set has dangerous voltages in side that may cause a fatality or fire.

3.The cabinet may produce the occasional "snapping sound" This is normal and caused by the materials in the cabinet expanding with room temperature changes.

Normal Volume

Normal or Weak Volume

Normal Volume

Colour purity fault which can be caused by moving the TV set, placing magnets near the TV screen or turning on/off house hold appliances such as vacuum cleaners near the TV set. Turn the TV off with the mains power switch for 15 minutes. When the power is turn on again the TV set will automatically demagnetize the picture. In severe cases leave the TV set turned off overnight.

CHECKING

volume、sound mute

adjust channel again

Haier 21FV6T User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual