21F6B-T
COLOR TV RECEIVER
OWNER'S MANUAL
MAIN FUNCTIONS
Slide Curtain Power On/Off Display
218 Channels Preset
Multiple Picture & Sound Modes
On/Off Timer
Child Lock
Soft Change Channel Function
Count Time
Channels Appointment
DVD Video Component Input Terminals
Please read this manual carefully before operating
the unit, and keep it for future reference.
CONTENTS
Before Operation
Warning and Cautions
Installation
Antenna connection
Preparation for the remote control
Position of keys and plug-ins
Front panel
Back panel
Using
the remote control
Basic Operation
Power on and power off
Viewing TV programs
Viewing TV programs
Program scan and screen display
Tuning
Automatic search. . .
Manual search
MFT
Skip
Adjusting the picture and the sound
Multiple picture modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ... .. . . . . . . . . . . . .
Multiple sound modes
S.C.C,count and mute
Setting the Timer
Timr off. . .
Sleep timer and timer on
Channels appoinment
Setting the other function
Language and screen protection
Curtain function and calendar display
Channel exchange
Setting the lock
Changing your password
Setting the lock
Game
Game control buttons and method of playing the game
Technical operation
Connecting Additional Equipments
Connecting additional equipment
Others
Troubleshooting
Specifications
Warning and Cautions
1. When you clean the TV set, please
pull out the power plug from AC outlet.
Don't clean the cabinet and the
screen with benzene, petrol and other
chemicals.
2. In order to prolong the using life of
the TV set, please place it on a
ventilated place.
3. Don't place the
TV set in the
sunshine or near
heat source.
4. To prevent the TV set from firing
and electric shock, don't expose the
TV set to rain or moisture.
5. Don't open the back cover,
otherwise it is possible to damage the
components in the TV set and harm
you.
6. When the TV set isn't going to be
used for long time or it is in thunder
and lightening, please pull out the
plug from AC outlet and the antenna
plug from the cover of the TV set.
Explanation on the display tube
In general, it is not needed to clean the tube surface. However, necessary,
it's surface can be cleaned with a dry cotton cloth after cutting off the power.
Don't use any cleanser. If using hard cloth, the tube surface will be damaged.
Installation
Antenna connection
Generally speaking, to enjoy a clearer picture, we recommend that you use a CATV
system or an outdoor antenna .In different places, the suitable antenna type and position
are different.
300 twin-lead cable
Antenna adapter
75 coaxial cable
Plug
(additional purchase)
AC power socket
Mixer
additional
purchase
Antenna input
75 standard
coaxial type
Note
* It is recommended that you'd better use 75
coaxial cable to remove the
disturbance caused by airwave.
* Don't bind antenna cable and electric wire together.
Preparation for the remote control
Battery installation Tips for remote operation
!
Remove the batteries cover.
!
Insert two size AA batteries matching
the +/-polarities of the battery to the +/marks inside the battery compartment.
! The battery life should be about one year
under normal use.
! When the remote control will not be used
for a long period of time or when the
batteries are worn out, remove the batteries
to prevent leakage.
! Do not throw the batteries into a fire.
Dispose of used batteries in the specified
manner.
! Do not drop, dampen or disassemble the
remote control.
Position of Keys and Plug-ins
Front panel
Headphones
socket
R/L
Audio
Back panel
Video
Menu
TV/AV
switching
Volume up/ down
Power switch
Power indicator
Signal receiver
Channel position up/down
Video C input terminal
B
Video Y input terminal
Video input terminal
(Not available) (Not available)
Antenna input socket
Video C input terminal
R
Audio input terminal
Using the Remote Control
Buttons and Descriptions
TV and AV Exchange Button
To exchanger between TV and
other available video inputs
Mute Button
Press to conceal the sound of programs.
Screen Display Button
System Adjust Button
Direct-digit Choosing Button
Directly select channel numbers
Lock Setting button
Used for setting lock for channel-
searching, channel,AV and clock,etc.
Picture Mode Select Button
There are DYNAMIC, STANDARD,
MILD,MEMORY, PICTURE MUTEand
COLOR MUTE six modes of picture.
Menu Select/ Adjust Button
Use this button to adjust the menu,
the volume and the channels, as well
as to control the game.
Chromaic Belt Length Adjust Button
(this machine has not this function)
Program Play-forward Button
Calendar
Game Background Select Button
BAR Button(this machine has not this
function)
Fire Button(can call the calendar)
Background Lamp Control Button
(this machine has not this function)
Restart Game Button
Game Exit Button
Program Play-backward Button
Chromatic Belt Width Adjust Button
(this machine has not this function)
Sound Mode Select Button
There are high,normal and low three
kinds of sound modes.
Stopwatch Button
The stopwatch can work 1 hour without
interruption and when you use this
function,do not operate other
function button as well.
Digit Select Button
Change the channel position number
between one digit, two-digits and three
-digits.
Program Scan Button
DC Standby Button
Sleep Timer Button
DISP
LOCK
WID
CALENDAR
BAR
TV/AV
SYSTEM
PRE
MODE
FIRE
CH+
MENU
CH-
-/--
BACK
RESTART
FIRE
SCAN
WATCH
S.STDP.STD
VOL+VOL-
HIT
EXIT
LIGHT
Power On and Power Off
Below are methods on how to power on/off the TV set with the switch on the TV and
on the remote control.
Power on/off
Connect/disconnect to the power
1.Connect the power supply wire, then press
power switch button, the red power indicator will
light, in several seconds the picture will appear
on the screen.
Menu
TV/AV
switching
Volume
up/ down
Channel
position up/down
2. If the TV is in the state of standby, press the
button on the remote control.
NOTE
1.You can also press the 0-9
button to call off the standby
status instead of pressing the
DC Standby button. Press the
digit button of the preset channel
(limited to one digit) , you can
complete the selection of channel while you turn on the
TV set( To operate the preset of TV channel, please see
TUNING on page 9-12).
2.When you do not use the remote control, you can
directly press the the button on the television to call off
the standby status.
DC Standby Button
Direct-digit Choosing Button
3. Press the button on the remote control
to get into the standby state.
4. Press the button on the TV set to
completely turn off the TV.
Power supply auto-off function
When the B.B(black background) is set ON,
and there is no signal , game screen protection
works, and ,in15 minutes later, it will change
into standby status.
Viewing TV Programs
The channels amount to 218(0-218).
Viewing TV programs
How to select the TV program
1.Use the direct-digit choosing button
Press the button from 0-9 to select a one digit channel.
If you want to select a two-digits channel, press the
Digit Select button and change it into two-digits mode,
then press the number of the channel.
If you want to select a three-digits channel, press the
Digit Select button and change it into three-digits mode,
then press the number of the channel.
If the channel position number you select is larger than 218,
Direct-digit Choosing
button
VOL- VOL+
Digit Select
button
PRE BACK
SYSTEM
CH+
MENU
CH-
the TV will use the first two number as the channel position.
2.Use CH+/- button
Press CH+ to increase the channel position number.
Press CH- to decrease the channel position number.
3.Use PRE button and BACK button
Press PRE button, you can go back to the channels you
viewed (as many as four).
Then, press Back button, you can return to the channels you
were watching just now (as many as four) .
For example, if you have viewed channel 1,2,3,4,5,6 after the
TV is powered on, and the channel you are watching now is
number 7, then press PRE button, you can view channel 6,5,
4,3, and you may press the Back button to return to channel 7.
Choose the proper volume you like
Press VOL+/- button to adjust the volume.
If tne VOL STORE is set ON, the volume of
the pre-fifty channel will be stored
independently.
Press VOL+ to increase the volume, press
VOL- to decrease the volume.
If the color or sound of one channel is abnormal
It might be because the color or sound
system has been set improperly.You may
follow the instruction below to adjust it.
Press SYSTEM button, and you can see
the form.
If the color of the picture is abnormal
Press CH+/- button, and move the indicator to COLOR,
and press VOL+ button to select the proper color(AUTO,PAL,
SECAM,NTSC4.43 and NTSC3.58 will appear alternately).
Generally, please set to AUTO.
If the sound is abnormal
Press CH+/- button, and move the indicator
to SOUND, and press VOL+/- button
to select the proper sound. (BG and DK will
appear alternately).
VOLUME
COLOR AUTO
SOUND BG
select adjust
COLOR AUTO
SOUND BG
select adjust
Viewing TV Programs(coutinued)
Program scanning function is to let the television automatically scan all
preconcerted channel program(about two seconds per channel).
Program scan and screen display
½ÚÄ¿ä¯ÀÀ¼°ÆÁÄ»ÏÔʾ¹¦ÄÜ
Program scanning function
1.If you want to scan the programs
and select your favorite channel ,
just press the SCAN button, then
SCAN
the television will start scanning
from the present channel with a
rate of two seconds per channel
and until all the preconcerted
programs have been displayed
once, the TV set will return to the
starting channel.
2.If you want to terminate this
function during the scanning, press
the SCAN button again, and the
program will stay at the present channel.
DISP
Screen display
Usually, when you press the DISP button, the channel
number will appear on the top right corner of the screen
and press it again, the screen's top left corner will
display the present time( the adjustment of time please
see Setting the Timer ).If press it for a third time, the
channel number and time will both disappear .
Tuning
There are three ways of searching: automatic search, manual search and MFT
(manual fine tune).
You may operate it either on the TV or on the remote control. Here is mainly about
the remote control.
Automatic search
Automatic search
1. Press MENU button, untill
TUNING appears on the screen.
CH+
TUNING
POSITION 1
BAND UHF
SKIP OFF
SEARCH UP
MFT DOWN
AUTO MEMORY
VOL- VOL+
VOL- VOL+
MENU
CH-
CH+
MENU
CH-
2. Press CH+/- button to move
the indicator( )to
AUTO MEMORY.
TUNING
POSITION 1
BAND UHF
SKIP OFF
SEARCH UP
MFT DOWN
AUTO MEMORY
3. Press VOL+, then
AUTO MEMORYmode will work.
The TV set will search
automatically all available
programs, after that, all
available programs will be
stored in turn and the TV set
will return to the first channel.
ASM VHFL 0
STOP
If you want to stop the search, just press VOL- button.
The order of the automatic search is due to the frequency
of the program, generally speaking, it is used only at the
first time you search the program, and once the order of
the program has been confirmed, you don't have to use
this function, otherwise the order of the program will be
changed.
After searching
Press CH+/- button to check the channels.
If the color or sound is abnormal in a certain channel, it
may be the color or sound system has not been set properly,
so you should adjust it to the proper system (Reference to
page 7).
Tuning(coutinued)
Manual search
Manual search
CH+
1. Press CH+/- button or the Direct-digit Choosing button to
select a channel directly(take channel 1 for example).
VOL- VOL+
MENU
CH-
Direct-digit Choosing
Button
CH+
VOL- VOL+
MENU
2. Press MENU button, until
TUNING appears on the screen.
3. Press CH- button and move
the indicator( ) to SEARCH.
4. Press VOL+/- button to start
searching.
VOL- button is used to search the
lower frquency channel.
VOL+ button is used to search the
higher frequency channel.
Repeat the steps until you find
the channel you need.
TUNING
POSITION 1
BAND UHF
SKIP OFF
SEARCH UP
MFT DOWN
AUTO MEMORY
TUNING
POSITION 1
BAND UHF
SKIP OFF
SEARCH UP
MFT DOWN
AUTO MEMORY
TUNING
POSITION 1
BAND UHF
SKIP OFF
SEARCH UP
MFT DOWN
AUTO MEMORY
CH-
5.When you plan to store
another new channel at a new
place, use CH+/- button and
move the indicator( ) to
POSITON, then press VOL+/button to select a channel
number and press CH+/- button
to move to SEARCH, then
repeat the fourth step.
TUNING
POSITION 1
BAND UHF
SKIP OFF
SEARCH UP
MFT DOWN
AUTO MEMORY
Tuning(coutinued)
MFT
MFT(manual fine tune)
CH+
VOL- VOL+
MENU
CH-
Direct-digit Choosing
Button
CH+
VOL- VOL+
MENU
When you can't get a satisfactory picture and audio effect,
you can fine tune to obtain.
1. Press CH+/- button or the
Direct-digit Choosing button
to select a channel directly (take
channel 1 for example).
2. Press MENU button, until
TUNING appears on the screen.
TUNING
POSITION 1
BAND UHF
SKIP OFF
SEARCH UP
MFT DOWN
AUTO MEMORY
3. Press CH+/- button and move
the indicator( ) to MFT.
TUNING
POSITION 1
BAND UHF
SKIP OFF
SEARCH UP
MFT DOWN
AUTO MEMORY
CH-
4. Press VOL+/- button repeatedly to fine tune, until the
picture and the sound become satisfactory.
VOL- button is used to search the lower frquency channel.
VOL+ button is used to search the higher frequency channel.
Tuning(coutinued)
Skip
Skip
After the programs are presetted, you can skip some
programs so that to select your favorite channels only.
1. Press CH+/- button or
Direct-digit Choosing button to
select a channel directly (take
channel 1 for example).
2. Press MENU button, until
TUNING appears on the screen.
Direct-digit Choosing
Button
TUNING
POSITION 1
BAND UHF
SKIP OFF
SEARCH UP
MFT DOWN
AUTO MEMORY
CH+
VOL- VOL+
MENU
CH-
3. Press CH+/- button and move
the indicator( ) to SKIP.
4. Press VOL+/- button to set it
ON.
TUNING
POSITION 1
BAND UHF
SKIP OFF
SEARCH UP
MFT DOWN
AUTO MEMORY
TUNING
POSITION 1
BAND UHF
SKIP ON
SEARCH UP
MFT DOWN
AUTO MEMORY
5. Press MENU button to close the menu. When you
select channels with CH+/- button, this channel will be
skipped. However, you can also use the Direct-digit Choosing
button on the remote control to select this channel ditectly.
If you want to recover the skipped channel
1. Use Direct-digit Choosing button to select the number of the
channel to be recovered.
2. Do the above steps again.
3. Press VOL+/- button to set SKIP OFF.
Adjusting the Picture and the Sound
Multiple picture modes
How to select the picture mode
DYNAMIC
P.STD
CH+
You may select the mode you want from the
STANDARD
five preset modes and one individual mode.
Press the P. STD button to select a mode you
like.DYNAMIC PICTURE, STANDARD
PICTURE, MILD PICTURE, MEMORY,
PICTURE MUTE and COLOR MUTE,
totally six picture modes can be selected
alternately.
MODE
DYNAMIC
STANDARD
MILD
MEMORY
PICTURE MUTE
COLOR MUTE
PICTURE QUALITY
BRIGHT COLOR
MEDIUM COLOR AND BRIGHTNESS
LOW COLOR AND BRIGHTNESS
SET BY YOURSELF
NO PICTURES
BLACK & WHITE
MILD
MEMORY
PICTURE MUTE
COLOR MUTE
If the picture mode is set to PICTURE MUTE or COLOR
MUTE,it will autorenew to MEMORY mode when you
restart your TV set.
Set the parameter of MEMORY
1. Press MENU button, until PICTURE appears on the screen.
VOL- VOL+
MENU
CH-
PICTURE
CONTRAST 100
BRIGHT 50
2. Press CH+/- button, move the
indicator( ) to the option you
want to adjust, then press
COLOR 50
SHARP 50
B.B ON
VOL+/- button to do the
adjustment.Then the parameter will be automatically stored
in MEMORY option.
OPTION
CONTRAST STRONG WEAK
BRIGHT BRIGHT DARK
COLOR THICK LIGHT
SHARP SHARP SOFT
VOL+
VOL-
·½±ãµÄͼÏñºÍÉùÒôµ÷Õû¹¦ÄÜ£¨½ÓÉÏÒ³£©
Adjusting the Picture and the Sound
(coutinued)
Multiple Sound Modes
How to select the sound mode
S.STD
CH+
VOL- VOL+
MENU
CH-
You can quickly select you most favored
sound mode from the following three
kinds of modes.
Press the S.STD button to select the
sound quality that you want.NORMAL
VOL,HIGH VOL and LOW VOL can be
selected in turn(their parameter may
be adjusted due to your need).
Setting the sound
This function can let you regulate the volume to the
preconcerted parameter quickly( such as the NORMALVOL,
HIGH VOL or LOW VOL).
1.Press MENU button, until
FUNCTION 1 appears on the
screen.
2.Press CH+/- button, move
the indicator( ) to the HIGH
VOL, then press VOL+/button to adjust the parameter
you expect. With the same
method, you can adjust the
parameter of the NORMAL
VOL or the LOW VOL.
Suppose the LOW VOL is A,
NORMAL VOL is B, HIGH
VOL is C, then that will be:
0 A B C 100
When adjusting the three modes,you should press them in
proper order as HIGH VOL,NORMAL VOL, LOW VOL.
NORMAL VOL
HIGH VOL
LOW VOL
FUNCTION 1
LANG. ENGLISH
CURTAIN III
LOW VOL 00
NORMAL VOL 00
HIGH VOL 00
VOL STORE OFF
FUNCTION 1
LANG. ENGLISH
CURTAIN III
LOW VOL 00
NORMAL VOL 00
HIGH VOL 00
VOL STORE OFF
S.STD
3.Press the S.STD button repeatedly to select the
different sound setting modes.
Volume store
When the VOL STORE( as above chart) is set ON, the
sudden change of the volume can be avoided when you
change the channel( only the pre-50 channels volume).
Adjusting the Picture and the Sound
(coutinued)
S.C.C, count and mute
How to use the S.C.C(soft change channel)
This TV set provides you with the function of S.C. C.
When it is set "ON", the picture will fade in and fade
out when the channel is changed.
CH+
VOL- VOL+
MENU
CH-
1.Press MENU button, until
FUNCTION 2 appears on the
screen.
2.Press CH+/- button, move
FUNCTION 2
SUBMARINE
POS.EX.
S.C.C OFF
COUNT 0:00
the indicator( ) to the S.C.C,
then press VOL+/- button to
set it ON or OFF.
How to use the COUNT function
This TV set provides you with the function of COUNT,
if you want to know how long your TV set has been
used, you can press MENU button, and find
FUNCTION 2 , then you can know the time the TV has
been on(count from 0 after 100,000 hours).
The time displayed is the total time when you watch the
TV(time of standby status will not be included), the
number cannot be altered through operating by the
remote control or on the TV set.
How to use the MUTE function
When you want to pay attention to the environment or
answer a telephone, or to meet guests, using the mute
function is very convenient.
1.Press button, a sign will
appear at the button left corner
of the screen, and the sound of
the TV set is cut off.
2.In order to recover the sound, press button again
or press VOL+/-button.
This TV set provides you with three timer functions such as timer on, timer off
and sleep off.
Timer off
Timer off
Using this function can turn the TV set automatically
into standby status at the preconcerted time.
CH+
VOL- VOL+
VOL- VOL+
MENU
CH-
CH+
MENU
1.Press MENU button, until
TIMER appears on the
screen.
2.Press CH+/- button, move
the indicator( ) to OFF
TIMER, then press VOL+/button to set it ONCE ,
EVERY,or OFF.
3.Press CH- button, move
the indicator( ) to the next
row. Then, press VOL+/button to set the time.
TIMER
OFF TIMER OFF
19:00
ON TIMER OFF
22:00
POS 0
CLOCK 1:40
APPOINTMENT
TIMER
OFF TIMER ONCE
19:00
ON TIMER OFF
22:00
POS 0
CLOCK 1:40
APPOINTMENT
TIMER
OFF TIMER ONCE
19:30
ON TIMER OFF
22:00
POS 0
CLOCK 1:40
APPOINTMENT
CH-
4.Press CH+/- button, move
the indicator( ) to CLOCK,
press VOL+/- button, and you
can set the time(It will be the
standard of the clock of
TIMER ON/OFF).
TIMER
OFF TIMER ONCE
19:30
ON TIMER OFF
22:00
POS 0
CLOCK 1:40
APPOINTMENT
Setting the Timer (coutinued)
Sleep timer and timer on
Sleep timer
Using this function, the TV set can be changed into the
standby status after a period of preset time from when
this function is activated.
1.The utmost time for this function is
120 minutes, and the time interval is
10 minutes.There are totally 12 kinds
of off-time.
2.Press the button repeatedly,
the screen will show in turn as the
right form.
Timer on
When this function is used, the TV set can
automatically turn the power on at the preset time in
the standby status and display the preset program.
CH+
VOL- VOL+
MENU
CH-
1.Press MENU button, until TIMER appears on the
screen.
2.Press CH+/- button, move
the indicator( ) to the ON
TIMER, then press VOL+/button to set it ONCE ,
EVERY or OFF.
3.Press CH- button, move
the indicator( ) to the below.
Then, press VOL+/- button to
set the time.
TIMER
OFF TIMER EVERY
19:00
ON TIMER EVERY
POS 0
CLOCK 1:40
APPOINTMENT
22:00
CH+
VOL- VOL+
MENU
CH-
4.Press CH+/- button, move
the indicator( ) to
POS 0, press VOL+/button to set the channel
with which the TV is turned
on(take 5 for example).
5.Press CH+/- button, move
TIMER
OFF TIMER EVERY
19:00
ON TIMER EVERY
22:00
POS 5
CLOCK 1:40
APPOINTMENT
the indicator( ) to CLOCK,
press VOL+/- button, and you can set the time(same as
TIMER OFF and it will be the standard of the clock of
TIMER ON/OFF).
Setting the Timer (coutinued)
The channels appointment function can help you conveniently preset as many
as six programs at a time. At the preset time, the TV set will automatically
change to the preconcerted channel. If two or more programs are set in a same
time, the last channel number will be selected.
Channels appointment
Channels appointment
CH+
VOL- VOL+
MENU
CH-
CH+
VOL- VOL+
MENU
CH-
DISP
1.Press MENU button, until
TIMER appears on the
screen.
2.Press CH+/- button, move
the indicator( ) to CLOCK,
press VOL+/- button, and you
can set the time(same as
TIMER OFF and it will be the
standard of the clock of APPOINTMENT).
3.Press CH+/- button, move
the indicator( ) to
APPOINTMENT, then press
VOL+ button to enter the
sub-menu.
4.Press VOL+/- button to set
the channel number you want
(e.g. 100).
5.Press CH- button to enter
the TIME item.Press VOL+/button to set the time.
Repeatedly press VOL+/- button,
the time changes with a rate of
one minute;
Press the button without
releasing, the time changes with
a rate of ten minutes.
6.Press the CH- button, and
follow the instructions of step
4 and 5, you can do the setting
of the next channel.
7.Press DISP button to exit
the TIMER menu.
At the preset time, the TV set will automatically change
to the preconcerted channel;
This function is available only when the TV set is on, and
it cannot be used in the status of standby or power off.
TIMER
OFF TIMER EVERY
19:00
ON TIMER EVERY
22:00
POS 0
CLOCK 1:40
APPOINTMENT
APPOITMENT
POS TIME
100 OFF
000 OFF
000 OFF
000 OFF
000 OFF
000 OFF
APPOITMENT
POS TIME
100 OFF
000 OFF
000 OFF
000 OFF
000 OFF
000 OFF
APPOITMENT
POS TIME
100 12:58
000 OFF
000 OFF
000 OFF
000 OFF
000 OFF
Setting the other Function
ÆÁÄ»ÓïÑÔ¼°ÆÁÄ»±£»¤¹¦ÄÜ
ÆÁÄ»ÓïÑÔ¼°ÆÁÄ»±£»¤¹¦ÄÜ
Language and screen protection
How to select the language on the screen
1.Press MENU button, until
FUNCTION 1 appears on the
CH+
VOL- VOL+
MENU
screen.
LANG. ENGLISH
CURTAIN
LOW VOL 00
NORMAL VOL 00
HIGH VOL 00
VOL STORE OFF
III
CH-
CH+
VOL- VOL+
MENU
CH-
2.Press CH+/- button, move
the indicator( ) to LANG., then press VOL+button to
select the language and the menu on the screen will
be displayed with the language you select.
How to activate the function of screen protection
If no signal has been received
by the TV set,when the B.B
function is set ON, the screen
will change into the form on
the right shows( game
background ) .
Press MENU button, until
PICTURE appears on the
screen. Then press CHbutton to move the indicator
( ) to B.B, and press
VOL+/- button to set it ON.
PICTURE
CONTRAST 100
BRIGHT 50
COLOR 50
SHARP 50
B.B ON
Setting the other Function(continued)
Curtain function and calendar display
How to use the Curtain function
This TV set provides three types of Curtain function
for you to select.
CH+
VOL- VOL+
MENU
CH-
CALENDAR
CH+
1.Press the MENU button, until the FUNCTION 1
appears on the screen.
2.Press CH+/-, and move the
indicator( ) to CURTAIN,
then press VOL+ to select
from I,II and III.
I: curtain
II : fade in and fade out
III: mixed I and II
FUNCTION 1
LANG. ENGLISH
CURTAIN III
LOW VOL 00
NORMAL VOL 00
HIGH VOL 00
VOL STORE OFF
How to use the CALENDAR function
This TV set has been designed to store the calendar
from the year 1901 to 2050.
1.Press the CALENDAR
button and then the
calendar will appear on
the screen(Press the
CALENDAR button again
to conceal the display).
SU MO TU WE TH FR SA
OCT 2002
YEAR MONTH
VOL- VOL+
MENU
CH-
2.Press CH+/- button to adjust the YEAR,press VOL+/button to adjust the MONTH.
Setting the other Function(continued)
The function of channel exchange will enable you to exchange any two programs
and you can conveniently adjust the order of the programs due to your own need.
Channel exchange
Channel Exchange
for example, to change between channel1 and 9
CH+
VOL- VOL+
MENU
CH-
Direct-digit Choosing
Button
CH+
1.Press MENU button, until
FUNCTION 2 appears on the
screen.
2.Press CH+/- button, move
the indicator( ) to POS.EX.,
Then press VOL+ button to
enter the sub-menu.
The number shown in
EX.POS1 and EX.POS2 is the
number of the present channel.
3.Press CH+/- button, move
the indicator( ) to EX.POS2,
then press VOL+ button to set
the channel number to 9.
FUNCTION 2
SUBMARINE
POS.EX.
S.C.C OFF
COUNT 0:00
POS.EX.
EX.POS1 1
EX.POS2 1
EXCHANGE ?
RETURN
POS.EX.
EX.POS1 1
EX.POS2 9
EXCHANGE ?
RETURN
VOL- VOL+
MENU
CH-
4.Press CH+/- button, move
the indicator( ) to
EXCHANGE, then press VOL+
button to confirm.Then the
programs of the two channel
will be exchanged.
Setting the Lock
This TV set provides you with the LOCK function, you can choose it due to your
need to protect your TV set.
Changing your password
Changing your password
This TV set can set a four digit password, the original
one is 0000, if you want to reset it, please follow the
LOCK
CH+
VOL- VOL+
MENU
CH-
instructions below.
1.Press LOCK button, the
screen will show as the form
on the right.
2.Press the 0 button four times,
and enter the menu of LOCK
setting. Press CH+/- button
and move the indicator( ) to
CHANGE PASS. , and press
VOL+ button to enter the
sub-menu of change
password.
LOCK OR UNLOCK
PASSWORD ----
LOCK OR UNLOCK
CHANGE PASS.
SEARCH LOCK OFF
POS LOCK ON
AV LOCK OFF
TIMER LOCK ON
CHILD LOCK OFF
ALL CLEAR OFF
Direct-digit Choosing
Button
3. Press the Direct-digit
Choosing button and input a
four-digits password.
4. After inputting the new
password, return to the
original status as shown on
the right form, then, you can
input the new password to
enter the menu of LOCK
setting.
CHANGE PASS.
NEW PASS. ----
LOCK OR UNLOCK
PASSWORD ----
Setting the Lock(continued)
Setting the Lock
Setting the Lock
There are SEARCH LOCK,POS LOCK,AV LOCK,
TIMER LOCK and CHILD LOCK five lock setting,you
LOCK
can set it due to your need.
1.Press the LOCK button, the
screen will show as the form
on the right.
LOCK OR UNLOCK
PASSWORD ----
Direct-digit Choosing
Button
CH+
VOL- VOL+
MENU
CH-
2.Press the Direct-digit
Choosing button 0 for four
times( or input the password
you set), and enter the menu
of LOCK.
LOCK OR UNLOCK
CHANGE PASS.
SEARCH LOCK OFF
POS LOCK ON
AV LOCK OFF
TIMER LOCK ON
CHILD LOCK OFF
ALL CLEAR OFF
3.Press CH+/- button, move
the indicator( ) to
SEARCH LOCK, then press
VOL+ button to set it ON or
OFF.
Note:
1.When the CHANNEL or AV LOCK is set ON,
the channel or av cannot be used, hence the
screen will change into black and indicate that
it has been locked. The TV set will be in the
state of mute.
2.When the CHILD LOCK is set ON, if the buttons
on the TV are pressed, it will indicate that the TV
set is in the status of CHILD LOCK, and the
buttons won't work.
3.When the SEARCH LOCK or the TIMER LOCK
is set ON, if you want to enter the TUNING or
TIMER menu,you will have to type the password.
Game
This TV set provides you with the SUBMARINE game, after entering the game,
except the buttons that are appointed in the game( for example, the game button,
VOL+/-and CH+/-, etc.)and the DC Standy button, the other buttons cannot be
used.
Game control buttons and method of playing the game
Game control buttons
Fire button
CH+
FIRE
To shoot also use
the MENU button
VOL- VOL+
MENU
CH-
Used to turn
up or down
MODE
RESTART
To select the background
when playing game
To restart the game
Used to turn left or right
EXIT
To exit game
Method of playing the game
1.Press MENU button until FUNCTION2 appears on
the screen.Press the CH+/- buttons to select the
SUBMARINE item. Then press VOL+ button to start the
game.
2.On the screen, the submarine figures in yellow is
operated by you. Press CH+/- and VOL+/- buttons to
move the submarine up, down, left or right to charge the
position and avoid the attacks from submarines (in blue,green and purple) of
enemy. Press MENU or FIRE button on the remote control to fire. You will get a
mark of 100 when you destroy a enemy submarine or a shell.Specially,when you
shoot down a red submarine appears on the top row,you will get a mark of 1000!
Scores will be filed if the submarine of enemy is destroyed.
3.You can press the RESTART button to restart the
game when it is GAME OVER or during the process of
the game.
Connecting Additional Equipments
Connecting additional equipments
You can connect the DVD,VCR and stereo system to the AV output to enjoy a
higher quality of picture and sound effect.
Signal flow
White (Audio)
Red (C )
R
Blue (CB)
Green (Y)
Yellow (Video)
DVD, VCD or other units
Laser DVD with output terminal
To audio input
To video input
To audio output
To DVD compnent output
Troubleshooting
Before calling service personnel, please check the following chart for a
possible cause to the trouble you are experiencing.
Symptom
Check these things
TV is not
turned on
Good picture ,
no sound
Poor color / tint,
good sound
Spots appear
on the screen
Lines appear
on the screen
Double images
or ghosts
Snowy picture or
black screen
Remote control
does not work
Be sure the power cord is plugged in.
The MUTE function may be used.
Adjust the volume of the TV set.
The contrast, color and tint may be incorrectly adjusted.
If you change the direction of the TV while the TV is on, the picture
may suffer from color shading. If so, turn off the TV and allow about
30 minutes to cool, then turn on the TV again.
The broadcast signal may be jammed by other electrical sources such
as cars, motorcycles, electric trains, high tension lines, neon signs, hair
dryers.
The broadcast signal may be jammed by other TV receivers, personal
computers, and TV games, as well as interference from radio stations.
Interference may be due to broadcast waves reflected from mountains
or buildings.
Check if the direction of the antenna is changed.
The antenna may be disconnected or falling out.
Check if the direction of the antenna is changed.
The batteries in the remote control may be exhausted.
The batteries may be improperly installed.
Check if there are obstacles between the remote control and the
remote (infrared ray) receiver.
Check if there is strong light interference around the remote (infrared)
receiver.
Check if the main power is ON.
The following conditions are not troubles
Clacking noise inside
the receiver
Uneven colour in a
certain portion of the
screen
It may result from the expansion of the shell caused by a temperature
change. This will not affect the picture and sound quality.
If the picture is too bright, this may occur according to the nature of
the pictures. Reduce the contrast, it may resume to normal.
CAUTION
In case of problems, have your TV serviced by qualified personnel.Never
attempt to service the set yourself since opening the cabinet may expose
you to dangerous voltage or other hazards.
Specifications
The specifications offered you here are only for reference and, with the improvement
of the products ,there may be some different between the description and the practicality.
Specifications
Model
Color system
PAL SECAM AV NTSC3.58 NTSC4.43
Sound system
Picture tube
Sound output power
Power requirements
Power consumption
Dimension
Accessories
DK BG
21"color picture tube(the viewable dimension is 51cm)
3W not distortional
160-250V 50Hz/60Hz
70W
610 Width x470 Depth x467 Height mm
Remote control X1
Owner's manual X2
Battery(AA) X2
NOTE
Design and specifications are subject to change without notice.
The dimension in this manual is a approximation.
01
0090505550
Loading...