Haicom HI-403 User Manual
HI-403
Bluetooth Box for GPS Receiver
HI-403
HI-403 BT Cube is a small box contains Class 2
Bluetooth module. One end of the cube is a 6 pin
Mini-DIN PS/II female connector for connecting to
the power source DC 12V car charger while the
other end is a 6 pin Mini-DIN PS/II male connector
for connecting to the PS/II GPS receiver.
Please consult the enclosed step by step Bluetooth
connection set up procedure guides.
Specifications:
GPSGPS
Bluetooth V1.1 Compliances
Frequency Range:
Interface:
Receiver Sensetivity:
Transmitting Power:
RF Input Impedance:
Frequency Hopping:
Baseband Crystal OSC:
Data Rate:
Operating Temperature:
Transmitting Range:
Power Consumption:
2.4 ~ 2.4835 GHz
unlicensed ISM band
USB / UART / SPI
-80 dBm @ 0.1% BER
Class 2 -6 dBm ~ +4 dBm
50 ohms
1600hops/sec.
16MHz
Up to 723kb/s
-30°C ~ +90°C
10 meters (Typical)
45 mA (Typical)
Bluetooth Box
for GPS Receiver
User Manual
Haicom
GPS Receiver
Handheld
GPS Receiver
5
1
PDA
Cable/Charger
Optional Accessories: Model#
PS/II to PDA cable Charger
1
PS/II to DB9 serial cable
2
PS/II to USB cable
3
PS/II to AC cigarret lighter
4
PS/II (Male) to handheld GPS cable
5
HI-403
BT Cube
2 3 4
USB
Cable
PS/II
ChargerDB9 Cable
CHG-XXXX
CAB-PS2
CAB-USB
CHG-PS2
CAB-XXXX
LED indicator:
Blinking: Searching host device
Stay On: Bluetooh connected
Pin Assignment:
43216
6 Pin PS/2 Female
Color
Green
White
Red
5
Black
34125
6 Pin PS/2 Male
Color
Green
White
Red
6
Black
• The specifications are subject to changed without notice
• All the names and trademarks are belonging to their respective companies.
Function
To BT (From GPS)
RX
To GPS (From BT)
TX
VCC
GND
Function
CN1
TX
RX
VCC
GND
CN1
5
4
2
1
5
4
2
1
Get Connected;
Installation Guide
3
Double Click “SPP on HAICOM BT GPS”
Double Click the Bluetooth icon
1
Notebook Installations
1
Run“My Bluetooth Places” and Double
Click the “Find Bluetooth Devices” icon
2
Double Click “HAICOM BT GPS”
4
Key in pin code: 0000
5
Connected
PDA Installations
Double Click “HAICOM BT GPS”
2
Select the correct com port
5
Found the host device
3
Start GPS, NMEA message inflow
6
For Connected with device
4
More satellites info
7
Loading...