IP66 Switches
WIS0084
1
General
Please note that all instructions are to be left with the
Consumer after installation.
The IP66 range is manufactured from tough, durable
thermoplastic, and is intended for use in an outdoor
environment, or one in which the protection provided
by the IP66 range is required.
All of the products are rated IP66, for protection
against water and dust. All IP66 products need to
be tted with waterproof cable or conduit entries to
maintain their IP rating once installed.
The IP66 range complies with the following standards
Socket outlets: BS1363-2 / SS145 (13A); BS546
/ SS472 (15A); Fuse connection units: BS1363-4;
Switches: BSEN60669-1 / IEC60669-1.
2
All products in the range comply with the low voltage
directive LV 72/23/EEC and where relevant EMC
directive 89/336/EEC
Advice should be sought before installing this product
in an environment where it is likely to be subjected to
chemicals, oils, solvents or wood preservers
Installation Instructions
These products should be installed by a competent
person (eg. qualied electrician) in accordance
with these instructions and in compliance with the
appropriate clauses of the current edition of the IET or
IEC wiring and building regulations. Sockets should
be protected by a suitable RCD device.
The IP66 range is designed to be mounted on a
vertical at surface, with socket outlets not more than
1.5 meters above the ground.
3
Loading...