Example of
Klik 7 pin
a page title
Product Standards & Mounting Methods
Product Description Klik Product identification BS number Description
Klik 7 pin Marshalling Boxes KLMB*W BS 5733:2010 General Requirements for Electrical Accessories.
Occupancy Sensor EEK* IEC 60669-1,
Conduit Box /
Surface Connector
Luminaire Leads KLB*, KLJ*, KLP*, KLT* BS 5733:2010
LS0H Flexible Cord Supplied with luminaire
Klik Lighting Control Module KLCM BS 5733:2010
Mounting Options for Drop Rod
Option 1.
Klik 7 Pin LMB features open ends to allow you to slide the box into
position before tightening for easier installation, or push the box up
on to the nut and rotate to locate and tighten to secure.
KLPCR/7 BS 5733:2010 General requirements for Luminaire supporting
lead
IEC 60669-2-1
BS EN 61535
BS 6500:2000
BS 7211:1998
Fpr EN 60669-2-5
BS EN 61335:2009
Option 2.
Single sided LMB can be mounted from the top as option 1 or from
the rear as shown. Note: Double sided LMBs can only be mounted
with option 1.
Switches for household & similar xed electrical
installations Part 2-1 for Electronic switches.
couplers for domestic, light industrial &
commercial use.
General Requirements for Electrical Accessories.
Installation couplers intendend for permanent
connection in xed installations.
Flexible cords rated to 300/350V for use with
appliances & equipment intended for domestic,
ofce & similar environments.
General Requirements for Electrical Accessories.
Switches for household and similar xed
electrical installations - Part 2-5: Particular
requirements - Switches for related accessories
for use in home and building electronic systems
Installation couplers intendend for permanent
connection in xed installations. Excluding
classes 10.1 & 10.3 are to aluminium enclosures
Mounting Options for Wall & Ceiling
Klik 7 Pin LMB includes the Klik mounting accessory, this makes it
much easier to mount LMB with Nail Guns or traditional xings. 2
accessories are included with each LMB. Mounting Accessory can be
clipped into the rear or top channel slot. It can be easily removed by
inserting a screwdriver in the RELEASE slot.
Note: Double sided LMB can only be mounted on top channel
slot.
9.26
General Catalogue • klik • Technical
Screw mounting tabs (x4)
Example of
Klik 7 Pin
a page title
Mounting Methods & Connecting Plugs
Mounting Options for Trunking
Mounting Accessory can be clipped into the rear or top channel slot.
It can be easily removed by inserting a screwdriver in the RELEASE
slot.
Trunking
20mm Conduit
Bush & Lock nut
Use a machine screw and nut
to secure to trunking using
Mounting Accessory
Fixed Wiring Connection
Klik 7 Pin LMB has 7 screw terminals available to the installer and are
arranged in the end cap as per diagram. DA+/DA- connections can
be used for DALI/DSI control.
Making a Connection
To connect, locate plug in socket
and push down to connect and
lock
To disconnect, press button to
unlock and push up to remove.
Neutral
Line
Switched Line
CPC
Data +
Data -
Emergency Line
Plug type is identiable by the
colour of the button
2.
1.
2.1.
White: Luminaire Lead
Red: Luminaire + Emergency
Black: Link Lead
Blue: Switching (OS, Wall)
Sales Service Centre • 01952 675612 Technical Support Helpline • 01952 675689
Klik
9.27
Loading...