Page 1
6H5560f
JF863BM - JF864BM
3 & 4 Pole MCCB Incomer Kits
145
99,5
90
433
70
70
210 (3P)
280 (4P)
273
180 (3P)
250 (4P)
403
331
6H5560f1Hager Electro S.A.S., Boulevard d'Europe, B.P. 3, 67215 OBERNAI CEDEX, France - www.hager.com OCOM 141925Hager 04.21 6H5560f6
Data Sheet
630 A Incomer kits contain:
• 3 x Phase extension links
• 3 x spreader links
• 6 x Phase link Allen fixing bolts
and washers (M10)
• 4 x Long fixing screws
MCCB
• 1 x
• 3 x M8 120mm Lug
• Terminal covers
Ens ure terminal shrouds are
oved before fitting.
rem
Page 2
630A Incomer kits contain:
Connect the extension links to the busbar with the 3 x
17mm & 19 mm
A/F
JF6/JF8 3 Pole 630A MCCB incomer kit
2
Fit the MCCB to the
hase extension links
• 3 x P
preader links
• 3 x s
• 6 x Phase link Allen fixing bolts and washers (M10)
• 4 x Long f
• 1 x
• 3 x M
• Ter
Ensure terminal shrouds are
removed before fitting.
ixing screws
MCCB
8 120mm Lug
minal covers
pan assembly with
the fixing screws
Fit the extension
links (A) to the
MCCB with the Allan
fixings
M10 coach bolts. Hand tighten at this stage.
Now tighten the MCCB fixing screws to secure the MCCB
to the pan assembly.
ZD0741 Issue 5
e the MCCB is in place tighten all M10 electrical
Onc
connections to 22Nm and M12 to 45-65Nm
Fit the terminal shrouds
Page 3
JF6/JF8 4 Pole 630A MCCB incomer kit
12 mm, 17mm & 19 mm
A/F
4 pole incomer kits contain:
630
• 3 x Line extension links
• 2 x Neutral links
• 4 x spreader links
• 8 x Phase link Allen fixing bolts and washers (M10)
• 4 x Long fixing screws
• 1 x MCCB
• 4 x M8 120mm Lug
• Terminal covers
Ensure t
erminal shrouds are
removed before fitting.
Remove the busbar shield.
Fit the MCCB to the pan assembly with the fixings provided
ZD0741 Issue 5
Connect the extension links to the busbar with the 3 x M10
coach bolts the M8 coach bolts. Hand tighten at this stage.
Connect the 2 neutral links with the M8 coach bolts, making
sure they are fitted under the Neutral phase of the MCCB.
Hand tighten at this stage.
Now tighten the MCCB fixing screws to secure the MCCB to
the pan assembly.
Once the MCCB is in place tighten all M10 electrical
connections to 22Nm and M12 to 45-65Nm. Tighten all M8
connections to 13Nm. Fit the terminal shrouds
Loading...