Example of
+
LED
Klik 7 pin
a page title
IR user remote controls (EEK002)
Use
The remote control allows the user to set or
modify settings on the presence detectors
EEK513P/EEK515P and EEK523P and
EEK525P
Each button corresponds to a command.
The acknowledgment
LED blinks during
the sending of the IR
message.
Settings available
Key Action Function Product Type
Short Press (< 5s.) On EEK513P / EEK515P
Long Press (> 5s.) Dim up EEK523P / EEK525P
Short Press Off EEK513P / EEK515P
Long Press (> 5s.) Dim down EEK523P / EEK525P
Short Press To start scene 1 EEK523P / EEK525P
Long Press (> 5s.) To start scene 1
Short Press To start scene 2
Long Press (> 5s.) To start scene 2
Short Press To start scene 3
Long Press (> 5s.) To start scene 3
Short Press To start scene 4
Long Press (> 5s.) To start scene 4
Technical specification
Power supply:1x 3V CR2032
Shelf life of battery: 3½ years
Protection index: IP 30
EEK523P / EEK525P
EEK523P / EEK525P
Klik
Sales Service Centre • 01952 675612 Technical Support Helpline • 01952 675689
9.35
Loading...