How it Works
hager
Loading...
coviva Smartbox TKP100A
Operation And Configuration Instructions
34 pgs10.44 Mb0
Table of contents
Loading...

hager coviva Smartbox TKP100A Operation And Configuration Instructions

Download
Page 1
coviva Smartbox
Operation and conguration instructions
hager.com
coviva Smartbox
TKP100A
WLAN stick
TKH180 Power supply
Page 1/34 05-2019
Page 2
coviva Smartbox
Contents
Design and layout of the device.................................................................................................3
Scope of delivery ......................................................................................................................................................3
Optional accessories ................................................................................................................................................3
Function .......................................................................................................................................4
System information ...................................................................................................................................................4
Correct use ...............................................................................................................................................................5
Product characteristics .............................................................................................................................................5
1 Preparations.............................................................................................................................6
Role concept .............................................................................................................................................................6
Congure myHager account .....................................................................................................................................6
Install coviva mobile-App ..........................................................................................................................................7
Call up coviva web app .............................................................................................................................................7
2 Project implementation ...........................................................................................................8
Log in to the app as administrator (Figure 6) ............................................................................................................8
Add user (Figure 7) ...................................................................................................................................................9
Edit/remove user (Figure 8) ....................................................................................................................................10
3 Conguration adaption .........................................................................................................11
Update device software (Figure 9)..........................................................................................................................11
Add device to the project ........................................................................................................................................11
Add Connected device (Figure 10) ....................................................................................................................12
Combine devices into groups (Figure 11) ...............................................................................................................12
Edit/remove group (Figure 12) ................................................................................................................................13
Create covigram .....................................................................................................................................................15
Example 1: Temperature warning (Figure 13): ...................................................................................................16
Example 2: Outdoor lighting (Figure 15): ...........................................................................................................18
Example 3: All OFF (Figure 16): .........................................................................................................................19
Edit/remove covigram (Figure 17) ..........................................................................................................................21
Add device to the favourites list (Figure 18) ...........................................................................................................23
Remove device from the favourites list (Figure 19) ................................................................................................23
Change settings (Figure 20) ...................................................................................................................................25
4 Operation.................................................................................................................................27
Operating concept ..................................................................................................................................................27
Carry out a networkreset ........................................................................................................................................30
RGB LED display ....................................................................................................................................................31
Remote maintenance ................................................................................................................31
Activate/deactivate remote access .........................................................................................................................32
Appendix ....................................................................................................................................33
User proles and rights ............................................................................................................33
Further connected devices .......................................................................................................34
hager.com
Page 2/34 05-2019
Page 3
coviva Smartbox

Design and layout of the device

(1)
(4)
(2)
005587...
GC03/16
(3)
(12) (13) (14)
ONLINE
WLAN
POWER
(10)
(9)
(11)
(8)
(7)
(6)
(5)
(15)
(16)
Figure 1: Rear/side view and accessories
(1) RGB LED display (2) USB connection sockets (3) RJ45 connection socket (LAN) (4) Connection power supply (5) QR code with coviva ID (6) Operation LED POWER (7) WLAN Display - only active with optional WLAN stick (see Accessories) (8) Status display ONLINE (9) Acknowledge button OK (10) Button RESET

Scope of delivery

– coviva Smartbox
– Protective cover (11)
– Adapter plate for wall mounting (12)
– Power supply 230 V~/5 V (13)
– RJ45 connection cable, Cat 5e (14)

Optional accessories

– WLAN stick (15)
– WLAN adapter (16)
hager.com
Page 3/34 05-2019
Page 4
coviva Smartbox

Function

System information

The coviva Smartbox forms the interface of wirelessly communicating devices such as KNX radio actuators or Twin Band devices and WLAN as well as IoT applications to the existing IP infrastructure via a network router. Electrical loads and functions of the building control can be interlinked, visualised, monitored and operated on mobile end devices or stationary computers by means of a mobile app or browser-based web app. In this way, location-independent access to the building control - via the home network and via the Internet - can be ensured and at any time.
This solution is especially designed for implementing smart Home functions and comfort in mo-
dernised or retrotted systems.
mobile-App Web-App
Internet
Global access
Building control
Local access
1)
WLAN/IoT Mobile communications Radio (KNX radio, Twin-
Band)
1)
Not available in every country.
Figure 2: Application environment
hager.com
Page 4/34 05-2019
Page 5
coviva Smartbox
mobile-App
Web-App
Lighting
Light- and
sun protection
Temperature
control
Security
devices
Extension
Figure 3: System overview

Correct use

– Interface for wireless communication with receivers/actuators via the IP network
– Operation and visualisation on (mobile) end devices via coviva app
– Connection to the network router by cable or via optional WLAN stick (see Accessories)
– The device is only suitable for indoor areas.
Product characteristics
– secure system administration via user proles with different rights
– control of KNX radio systems and WLAN applications via mobile app for mobile end devices
or web app for notebook, PC, …
– simple creation of scenes (covigrams) via the app
– self-congurable messages after events
– remote access and remote maintenance via integrated Dyn DNS service
– Logic operations
– Updates with notications available online
hager.com
Page 5/34 05-2019
Page 6
coviva Smartbox
The administration process
Prepare the smartbox in three steps for operation of building control:
coviva
Preparation
myHager
Project implementati-
on
Conguration adapti-
on

1 Preparations

Role concept

User proles with different access rights must be managed in the coviva app.
User prole Access rights myHager ac-
count
Electrician during the project
- unlimited rights
after the handover, if required:
- Remote access after release
by the administrator
Administrator for one user per smartbox:
- Conguration rights for
adding/removing devices
- Administration of all users
User name normal rights for adapting and
operating the system
Table 1: User proles
Required Installation engi-
Required Builder
not required Family members,
Operation
Example
neer, planner
fellow occupants
Detailed information on the access rights per user prole can be found in an overview table
in the appendix.
Congure myHager account
In order to manage a project with the smartbox, successful registration as an administrator ac­cording to the role concept (Table 1) under hager.com is necessary.
 Go to the hager.com website and click on register now.
Or:
 Scan the QR code with an appropriate app, switch to the coviva
homepage and select Registration.
Fill out the personal data, agree to the use of personal data and congure
account with Send.
An e-mail with a conrmation link for activating the my Hager account will be sent to you ().
 Click the Complete registration button in the
hager.com/coviva
e-mail to activate the account.
Later, you can also view completed coviva projects via the account (Figure 5).
hager.com
Page 6/34 05-2019
Page 7
coviva Smartbox
Hager Ltd.
97.11.1969
Business address *
Business address Private address
Company *
Hager Ltd.
Street / house number*
Hortonwood 50
Postal Code*
TF1 7FT
Place*
Telford, Shropshire
Country*
United-Kingdom
Phone
+44 1952677899
Mobile phone no.
Consent *
I agree that the personal data given here may be combined, processed and used with other personal data that you have about me so that you are able to present products and solutions to me that tailored specifically to my requirements and interests. Please read on here
Newsletter
Yes, please send me newsletters to inform me of new products, services and software updates from Hager Vertriebsgesellschaft.
* Mandatory fields
DD.MM.YYYY
Send
Input (265)
Welcome to coviva!
Your electrician has set up your coviva Box for you. To benefit from the full range of functions supported by your connected home, you will need a myHager account.
You can create a myHager account easily for my.client@email.com right now:
Complete registration
Figure 4: Congure myHager account
Install coviva mobile-App
 Log in to the corresponding app store on the end device and select the coviva app.
 Download and install app.
The app requires at least version IOS 7.1 or Android 4.1 or higher on the mobile
end device.
Call up coviva web app
As an alternative to the mobile app, it is also possible to access the smartbox after project take over via a web portal from a PC, notebook or mobile end device with a Windows operating system. An HTML5 compatible browser such as Chrome, Safari, Internet Explorer or Firefox is required. The user interface is similar to the coviva mobile app and provides the same functions in a suitable format for larger screens.
 Enter the URL customised with the ID: https://12-stellige coviva ID.koalabox.net/webapp in
the browser.
The web app opens.
The web app can also be called up via the myHager account.
 Log into the my Hager account and select.
 Open the web app via .
The end device and smartbox must be online each time the web app is subsequently used.
My account
My software
My coviva Installations
Your coviva installations
ID
0024C6F21834
coviva: Intelligent retrofit wireless technology
With the wireless coviva system for smart homes, you are oering your customers a solution for an intelligent home. Ideal for retrofit, renovation or modernisation projects.
my.client@email.com
Learn more now!
Installation engineer's Customer's e-mail address
meier@email.com
hager.com
Figure 5: myHager project view
Page 7/34 05-2019
Page 8
Login
Back
Welcome to coviva !
The unique ID on the rear of your
coviva controller connects you directly
to your coviva
0024C6F21834
Test without login
General Term of Use
Terms of use
Please confirm the terms and conditions of use for your coviva Smartbox.
Hager Ltd.
coviva Smartbox

2 Project implementation

Log in to the app as administrator (Figure 6)

Following project handover, the administrator automatically receives an e-mail in the coviva app from his or her electrician indicating that Connected Home can now be used and containing the access data (e-mail address). The administrator can now log in to the coviva app.
The (mobile) end device is online.
 Open the coviva app .
The coviva ID for connecting to the smartbox is displayed. If this is not the case, use and the (mobile) end device's camera to scan in the coviva ID shown on the rear side under the cover or enter it via the keypad.
 Select Login to change over to the login page.
The administrator must have a myHager account. If an account has not yet been created,
following handover, the user will be forwarded to the registration page the rst time he or she
attempts to log (see setting up myCongure myHager account account).
Enter User name and the Password for myHager account and log in with Add user.
If the General Term of Use (GToU) for the coviva app have not yet been accepted in the my- Hager account, the corresponding web page must be accessed at this point.
 To do this, press the myHager GTC buton.
 Accept the GToU via the checkbox and complete the operation via Save.
 Afterwards, log in again to the app.
Input (265)
Welcome to coviva!
Your electrician has set up your coviva Box for you. You can now enjoy your connected home.
Download the coviva app:
Download the app to your device here.
Your myHager access data:
my.client@email.com
Kind regards, Your Hager Vertriebsgesellschaft team
Personal data
coviva terms and conditions of use *
I accept the coviva terms and
conditions of use of dated 31/01/2017.
* Mandatory fields
Publication details Data privacy Cookie policy
Save
Hager Ldt.
Login
Hager Ltd.
Terms of use
Please confirm the terms and conditions of use for your coviva Smartbox.
Thank you
We have saved your consent in your myHager account. Please now re-open the coviva app on your smartphone or tablet, navigate back to the login form and enter your myHager password again. You should be able to activate the app immediately.
Publication details Data privacy Cookie policy
Hager Ltd.
my.customer@email.com
Login
Q
W E R T Y U I O
A S D F G H
Z X C V B N M
space return.?123
my devices
Ceiling light living
Wall light living ro...
Standard lamp_85...
my groups
Living
Scene TV
my covigrams
J K L
To use coviva application, General Terms of Use shall be validated for
you MyHager account. Please
click“MyHager GToU” button to be
redirected for the validation.
MyHager GToU
P
i
Off
Off
Off
hager.com
Figure 6: E-mail and administrator login
Page 8/34 05-2019
Page 9
i
coviva
Devices
Groups
Covigrams
Favorites
Logout
Peter
Principle
Me
Others
Users
Settings
Meier
Installer
coviva ID
0024C6F21834
Date/Time
09.11.16, 00:00
coviva Language
English
coviva Vers.
2.6.7(cc24680)
KNX Version
1.1.13
Alarm Version
1.0.6
Users
My account
Principle
Settings
Add user
Save
Back
Add user
Save
Back
Add user
Save
Back
Add user
Save
coviva Smartbox

Add user (Figure 7)

The administrator can set up a user prole with corresponding access rights (see Table 6) for all tenants and visitors for operating the building control via the coviva app.
As local operation also functions ofine, we recommend that as the administrator you create
an additional user prole for yourself with standard access rights (user). As a user, you can
log into the app and remain logged in without having to validate the access data online.
 In the main menu press and call up the settings with .
 Select All users .
The Users view is called up.
 Add a user with the button in the top right corner.
 Assign the level of rights to the user with Classic (User) via the checkbox. Conrm with
Save or discard via .
 Then select in succession:
– First name and last name
– E-mail address and telephone number
– User name and passwort
Each entry must be conrmed with Save or discarded via Back .
The new prole is displayed in the overview of all users.
Name
Please indicate the name of the
Name
new User
Forename
Surname
Q
W E R T Y U I O
A S D F G H
Z X C V B N M
Musterman
space return.?123
coviva
J K L
return.?123
Max
User right
Please choose which type of user you
want to add
Classic
All users
Settings
Contact information
Please indicate the contact information of the new user
E-Mail
P
Q
Max@email.com
04452/918951Phone
W E R T Y U I O
A S D F G H
Z X C V B N M
space return.?123
P
J K L
Name and Password
Please enter the name and
password of the Wifi network you
want to create.
Name
Password
Repeat pas.
Q
A S D F G H
Max@email.com
W E R T Y U I O
J K L
Z X C V B N M
space return.?123
Peter
Meier
Max
P
Q
User
Me
Principle
Others
W E R T Y U I O
A S D F G H
Z X C V B N M
J K L
space return.?123
Installer
Classic
P
hager.com
Figure 7: Create user
Page 9/34 05-2019
Page 10
Max
Save
Surname
E-mail
Phone
User name
Rights
Change password
Classic
Contact
Profile
Max@email.com
Max@email.com
Mustermann
04452/918951
Delete User
Change password
Peter
Save
User
Surname
E-mail
Phone
User name
Rights
Classic
Contact
Profile
04452/918951
Max
Max@email.com
Peter@email.com
Mustermann
Peter
Principle
Installer
Meier
User
Me
Others
Settings
My account
Principle
Installer
Meier
User
Me
Others
coviva Smartbox
Edit/remove user (Figure 8)
The user data from the electrician and administrator are always updated with those stored in
the myHager account. These proles cannot be removed or their user data changed via the app.
The Settings page has been called up.
 Select all users.
The user view is called up.
 The saved data is displayed via next to a user.
 Then carry out the following actions as required:
– Modify entires in the user data and conrm via Safe or discard via < ….
– A new password can be assigned with Change password , which must be conrmed with
Save or discarded via < ….
– All rights in the app are withdrawn from this user via the Delete User button.
Alternatively a user reset can be performed on the smartbox in order to restore the project to
its status prior to handover.
Max
Classic
Change password
Delete User
Password
Repeat pas.
Q
W E R T Y U I O
A S D F G H
Z X C V B N M
space return.?123
Settings
space return.?123
J K L
Save
User
P
Settings
coviva ID 0024C6F21834
Date/Time 09.11.16, 00:00
coviva Language English
coviva Vers. 2.6.7(cc24680)
KNX Version 1.1.13
Alarm Version 1.0.6
Users
My account User
All users
hager.com
Figure 8: Edit/remove user
Page 10/34 05-2019
Page 11
coviva Smartbox
3 Conguration adaption
The following descriptions are based on the mobile app in the IOS system. The Android app as well as the descriptions in the Web app may vary slightly from this, but the functions, buttons and messages are identical.

Update device software (Figure 9)

If a software update is available for the smartbox, this is displayed via a message.
We recommend carrying out the update immediately in order to prevent any malfunctions or
incompatibilities.
 Start the update with Install .
The RGB display (1) of the smartbox ashes during the update. It goes out after successful
completion of the update.
The operation may take a few minutes. If the connection is disconnected during the update,
restore the connection with Retry.
If the update is to be carried out at a later time,
rst decline the update via Later .
Each time the app is subsequently opened, the update will be offered again.
my devices
Update available
A new update for your
coviva controller is
available. During the
update process the coviva
controller will be not
reachable for some
minutes.
Install
Later
i
Figure 9: Software Update for the Smartbox

Add device to the project

Each device must be integrated individually.
 Press the blue button.
The context menu for selecting the device category for the product to be integrated opens.
The list of compatible products is available under hager.com/coviva.
As an example, the integration of the weather station (internal module) from Netatmo is descri­bed following. All compatible devices from other manufacturers can also be added to the coviva Smartbox as appropriate.
hager.com
Page 11/34 05-2019
Page 12
Groups
Temperature
Humidity
CO2
Sound meter
Pressure
none
23,3°C
35%
881 ppm
57dB
1028 mBar
Details
Back
Measurements
Add a device
my devices
Wall light living room
Ceiling light living
Standard lamp sofa
Off
Off
Off
What kind of device
would you like to add?
Cancel
i
coviva Smartbox
Add Connected device (Figure 10)
The weather station (indoor module) has been commissioned and has been registered in the WLAN network. A Netatmo account has been created.
 Select Netatmo in the context menu.
The view for entering the access data of the Netatmo account opens.
 Enter E-mail address and password for the Netatmo account of the customer and nish via
Let‘s go .
The connection setup of the app via the smartbox to the Netatmo account is displayed in the app. If the connection is successful, Netatmo is displayed.
 Activate the line with the description and change the name for the weather station if requi-
red.
 Finish the operation with Save or switch to the main menu via Back.
The added device is displayed under my devices .
 Carry out the operation with each additional, compatible device until all Netatmo devices
have been added and uniquely named. As a result, the devices stored in the Netatmo ac­count are displayed for selection, instead of another prompt for the access data.
Netatmo
Smart Thermostat
Adding Netatmo weather station
Enter the user name and password
of your Netatmo account.
Peter@email.com
Let's go
11
2 3 4 5 6 7 8 9
- / : ; ( )
#+=
€ & @ “
. , ? ! ´
space.?123
Save
Weather station
0
return
my devices
Ceiling light living
Wall light living room
Standard lamp sofa
Weather station
my groups
Lighting first floor
First floor
20°C
Figure 10: Add Netatmo devices
Combine devices into groups (Figure 11)
Devices can be combined into groups for easy navigation. In this way, all devices can be grou-
ped, for example, room by room or per oor.
 To do this, press the green button.
A context menu for selecting whether a group or zone should be added if thermostats are installed, is displayed.
 Select Add group.
A list with all devices is displayed under a new Group. The title line under is activated.
 Give the group a name via the keypad.
 The desired devices are added by activating the relevant checkbox of this group.
 Assign the devices to this group with Save or discard via .
The group is displayed in the main menu.
Devices can be added to a group at any time.
i
Off
Off
Off
 To do this, press on the group.
The combined devices in the group are displayed.
 Press the blue button.
All devices not yet added to this group are displayed.
hager.com
Page 12/34 05-2019
Page 13
i
my devices
my groups
my covigrams
Off
Off
Off
Living
Scene TV
Wall light living room
Ceiling light living
Standard lamp sofa...
i
Off
my devices
Off
Off
my groups
my covigrams
Wall light living room
Living
Scene TV
Ceiling light living
Standard lamp sofa...
Group
Ceiling light living
i
Off
my devices
Off
Back
Wall light living room
Standard lamp sofa...
Eat-in kitchen
i
my devices
Eat-in kitchen
Devices
Mirror hall
Ceiling light hall
Wall light bathroom
coviva Smartbox
 Select the devices to be added via the checkbox.
 Assign the devices to the group with Save or discard via .
The added devices are displayed in the device list of the group.
 Go back to the main menu via Back.
Save
Eat-in kitchen
Wall light living room
Standard lamp sofa
Q
W E R T Y U I O
A S D F G H
Z X C V B N M
.?123
space return
P
J K L
Eat-in kitchen
Save
Ceiling light living
Ceiling light kitchen
Workplace light kitchen
Blind kitchen
Blind living room
Back
Ceiling light living
Ceiling light kitchen
Workplace light kit...
Blind kitchen
Blind living room
my devices
Off
Off
Off
Ceiling light living
Wall light living room
Standard lamp sofa...
my groups
Living
Scene TV
Eat-in kitchen
i
Off
Off
Off
Figure 11: Create group, add group
The combining of devices for heating control such as thermostats in a zone takes place in
the same way as with a group and is initiated by selecting Add hot water zone. A zone is also displayed in the main menu under my groups.
Edit/remove group (Figure 12)
The groups can be edited in the app or removed again at any time.
 Press i in the top right corner of the main menu.
All elements in the main menu are switched to edit mode.
 Select the group to be edited via the i on the corresponding group.
Details about the group, such as the switching state and integrated devices, are displayed.
 Then carry out the following actions as required:
– Change the name of the group by activating the name line and making an entry via the
keypad.
– Devices to this group or remove it from this via the displayed checkboxes.
– Group from the project Delete.
The group is no longer displayed in the main menu.
hager.com
Page 13/34 05-2019
Page 14
Detail
Save
Gerät entfernen
Back
i
i
i
i
i
my devices
my groups
Off
Off
Off
my covigrams
Wall light living r...
Scene TV
Eat-in kitchen
Ceiling light living
Standard lamp s...
Devices
Wall light living room
Detail
Device
Ceiling light living
Back
i
my devices
my groups
my covigrams
Off
Off
Off
Wall light living room
Eat-in kitchen
Living
Scene TV
Ceiling light living
Standard lamp_851...
my devices
my groups
my covigrams
Off
Off
Off
Wall light living r...
Scene TV
Eat-in kitchen
Ceiling light living
Standard lamp...
i
coviva Smartbox
 With the exception of Delete, nally conrm all edit operations with Save or discard via Back .
The display returns to the main menu and displays the changes.
 Press in the top right corner of the main menu to exit the edit mode.
Save
Living room
Delete
Q
W E R T Y U I O
A S D F G H
Z X C V B N M
.?123 return
space
P
J K L
Living
Detail
Ceiling light living
Living
Device Ceiling light living
Delete
i
Standart lamp_851...
my devices
Ceiling light living
Wall light living room
Standard lamp_851...
my groups
Living room
Scene TV
Eat-in kitchen
my covigrams
my devices
Ceiling light living
Wall light living room
Standard lamp_851...
Off
Off
Off
Off
Off
Off
hager.com
my groups
Scene TV
Eat-in kitchen
my covigrams
Figure 12: Edit/remove group
Page 14/34 05-2019
Page 15
coviva Smartbox
Create covigram
Covigrams are ideal for frequent or conditional actions that should be controlled and/or automa-
tically triggered. A covigram denes a scene, in which one/several trigger/s start/s one or more
actions.
Triggers and actions are dened via If … … Then …-logic functions. In the course of this, seve- ral triggers are OR/AND-linked, while the actions are AND-linked.
Basically the following types of triggers can be dened:
– Time:
This allows a daily routine to be congured at a specic time or one/several weekday(s) to be selected, when one/several action(s) is/are to be triggered at a specic time.
– Event:
This allows a device with a respective switching/operating state to be selected, which then forms the trigger for one/several action(s).
A group cannot be dened as a triggering event.
– Celestial:
Astro function that can be used to dene sunrise or sunset actions. These variable times are
set by IP localisation via the router's location and can be shifted by +/- 03:59 h.
By default, the sun's position will trigger the dened action(s) daily. If the sun's position is
to trigger actions only on certain days of the week, an additional and-linked time trigger must be added.
– Play:
When selecting the manual trigger, one/several action(s) can be started exclusively by an operation in the app. The manual trigger cannot be and-linked with other triggers.
Denable types of actions for the trigger are:
– Device:
One or several devices can be selected from all added devices and their switching/operating
state, which should be reached after the trigger, can be dened.
– Push notication:
An individually created text message can be written for one/several triggers, which appears as a push message for all users in the app when triggered. Timely information can be helpful in order to initiate a countermeasure if required.
Once the project has been handed over, the electrician does not receive a push mes-
sage any more.
In the event that the app is not opened, the push message is additionally output on the
end device, if enabled.
– Partial:
If a zone is selected as an action, a heating zone can be controlled after triggering, for ex­ample, a new temperature setpoint is received or another operating state is switched to.
In this way, many combinations are possible.
As an example, three tasks will be implemented one after another in one covigram each:
hager.com
Page 15/34 05-2019
Page 16
coviva Smartbox
Example 1: Temperature warning (Figure 13):
Task: If the room temperature drops below 18 °C in the bedroom or children's room, a message should be sent in order to check this actively and to initiate countermeasures if required.
 To do this, press the red button.
The editing page Covigramm opens. The title line under is activated.
 Give the covigram a name via the keypad and terminate the entry with the Return button.
Dene trigger
 Press the button under If ….
The page for dening a trigger opens.
 Select the type of trigger, in the example Event (Figure 14).
The button of the trigger type is highlighted in red. All devices of the project are listed with symbolic buttons and their name.
The display can be swiped to the left and right.
 Select the device by pressing the symbolic button, in the example Heating bedroom.
Possible triggers are displayed.
 Select the trigger by pressing the symbolic button, in the example Temperature Moves
under.
The button of the trigger is highlighted in red.
 Set the desired minimum temperature using the scroll wheel, in the example 18 °C.
 Finish the setting of the trigger with Save or discard via .
The trigger is displayed under Covigramm.
 Add another trigger in the same way if required, which is OR-linked, via the button, in the
example OR-linked in the top row Heating children‘s room.
hager.com
Page 16/34 05-2019
Page 17
Trigger
Save
Choose a trigger
Choose a device
Time
Event
Sun pos.
Play
my devices
my groups
Off
Off
Off
Wall light living r...
Living
Scene TV
Ceiling light living
Standard lamp s...
Trigger
Save
Choose a trigger
Covigrams
Save
And only ...
Time
Event
Sun pos.
Play
17,5
18,5
19,0
19,5
17,0
16,5
Trigger
Light
Ceiling lig.
Heati. s.
Netatmo
Adjust value
Set trigger
Covigrams
Temperature warning
Heati. k.
Heati. s.
or
If...
and
And only ...
Covigrams
Save
Temperature warning
Heati. k.
and
or
And only ...
and
Then ...
If...
coviva Smartbox
my covigrams
Save
Heati. k.
Temperature
Set to moves under moves
Temperature
Temperature Heizm
< 18,0°C
18,0
Temperature warning
If...
or
Q
W E R T Y U I O
A S D F G H
Z X C V B N M
space returnreturn
.?123
J K L
Event Sun pos.
Time
P
Play
Heati. s. Heati. k. Netatmo
Light Ceiling lig.
Save
...
Then...
and
Figure 13: Covigram for example 1: Trigger
Dene action
Press the button under Then … .
The page for dening an action opens.
 Select the type of action, in the example Push notication (Figure 14).
The button of the action type is highlighted in red. Only a possible action is displayed in the example.
 Select the action by pressing the symbolic button, in the example Notication sent to every
user.
The button of the action is highlighted in red. The keypad and an input eld for the message
opens.
 Enter a message via the keypad.
 Save the action and message with Save or discard via .
The triggers and action are displayed under Covigramm.
 Save the covigram again via Save or discard via .
The view switches to the main menu. The created covigram is displayed under my covi- grams.
hager.com
Page 17/34 05-2019
Page 18
Save
Action
Covigrams
Temperature warning
Heati. k.
Push n.
and
Heati. s.
or
then ...
If...
and
And only ...
Action
Edit notification
i
coviva Smartbox
Save
my devices
Wall light living room
Standard lamp sofa...
my groups
Living
Scene TV
my covigrams
Temperature warning
Off
Off
Device Push n. Zone
Choose an action
Push notificat.
Notification sent to every user
Push notificat.
Notification sent to every user
The temperature has fallen below the minimum temperature. Please change operation mode or increase the setpoint.
Q
W E R T Y U I O
A S D F G H
Z X C V B N M
space return
.?123
Save
P
J K L
Figure 14: Covigram for example 1: Action
Example 2: Outdoor lighting (Figure 15):
Task: On Saturday and Sunday the outdoor lighting should be switched on earliest at 19:00 and on the other weekdays earliest at 17:00 every evening. In the course of this the outside lighting should only be switched on after sunset. This ensures, for example, that the outdoor area is
illuminated at xed times of arrival, such as after work in the winter months, and that switching
does not occur during the summer months, when no lighting is required at the time of arrival.
 To do this, press the red button.
The editing page Covigramm opens. The title line under is activated.
 Give the covigram a name via the keypad and terminate the entry with the Return button.
Dene trigger
In the le view of the covigram via under If … select the type of trigger, in the example
Zeit .
The buttons for triggering Every day or Every weekday are offered at a specic time.
 Press the Every weekday button.
 Select the days Sa and Su.
 Set the time for the action in the format hour:min using the scroll wheels - here 19:00 - and
nish with Save.
 Add the second trigger for the remaining weekdays in the same way via under If … - for
Mo - Fr at 17:00 and nish with Save.
 In addition, for all weekdays, select the second condition for triggering via under And only
…; in the example, sun position with the sun position symbol.
The buttons during the day and during the night are available with constantly adjusting sunri­se and sunset times.
Press the button during the night and conrm with Save.
In the detailed view of the covigram under And only … is displayed
Dene actions
 Select the types of actions via under Then …, in the example Device .
All devices are displayed.
 Select a device - here light Entry.
 Upon the occurrence of one of the triggers, select the switching state of the device (switched
on/switched off) via the buttons provided - in the example Lighting entry Switched on - and nish with Save.
hager.com
Page 18/34 05-2019
Page 19
185920
012117
58
02
Trigger
Choose a device
Choose a trigger
Event
Sun pos.
Play
at a certain time
Every day
16
59
18
01
19
15
58
02
Trigger
Choose a device
Choose a trigger
Event
at a certain time
Every day
Adjust trigger time
Sun pos.
Play
Detail
Save
Outdoor light
and
Then...
Back
und
And only...
Trigger
Choose a Condition
Choose a trigger
Time
Event
Sun pos.
05:52 - 21:03
during the day
Trigger
Choose a device
Choose a trigger
Event
Play
Set trigger
Switch on
Input
Switch o
Input
Input
Sidewalk
Housewa.
Bedroom
Kitche
Detail
Save
Outdoor light
eve. Sa...
19:00
eve. Mo...
17:03
or
If...
Back
Sun pos. during the
and
And only...
Detail
Save
Outdoor light
eve. Sa...
eve. Mo...
or
If...
Back
and
Then...
Detail
Back
Outdoor light
Eve. Sa. Su.
Eve. Mo...
or
Input
Sidewalk
Housewa.
and
Then...
If...
Sun pos.
and
And only...
coviva Smartbox
 Add the remaining lights in the outdoor area via in the same way as the action being exe-
cuted simultaneously - light Pavement, light Housewall, ..., select the switching state Swit- ched on and nish with Save.
 Complete the covigram with Save.
The covigram is displayed in the main menu.
If the outdoor lighting should be switched off again at a specic time in the morning, a sepa-
rate covigram must be created for this.
Time
Every weekday
at a certain time
Mo. Tu. We. Th. Fr. Sa. Su.
at a certain time
19 00
Then...
and
Save
If...
eve. Sa. Su.
or
19.00
Time
... ...
Save
Time
Every weekday
at a certain time
Mo. Tu. We. Th. Fr. Sa. Su.
at a certain time
Save
17.00
17 00
Save
And only...
und
my groups
Scene Tv
Eat-in kitchen
my covigrams
Temperature warning
Outdoor light
my favorites
Ceiling light living
Off
Off
Off
during the night
21:03 - 05:50
Save
Figure 15: Covigram for example 2
Example 3: All OFF (Figure 16):
The entire lighting in the house should be switched off and all blinds closed by manually pres­sing a button, for example, when leaving the house or when going to bed.
 To do this, press the red button.
The editing page Covigramm opens. The title line under is activated.
 Give the covigram a name via the keypad and terminate the entry with the Return button.
Dene trigger
In the le view of the covigram via under If … select the type of trigger, in the example
Play .
The button for Trigger covigram with Play button appears.
Activate button and nish with Save.
In the detailed view of the covigram under If … is displayed.
hager.com
Page 19/34 05-2019
Page 20
Trigger
Choose a trigger
Event
Tim
Sun pos.
Play
Trigger
Choose a device
Choose a trigger
Time
Event
Play
Set trigger
Wall lig.
Stand. la.
Bedroom
Kitche
Switched on
Ceiling light living
Covigram
Save
All OFF
Play
and
or
If...
And only ...
Covigram
Save
All OFF
Play
or
And only ...
If...
and
Then...
Covigram
All OFF
Play.
or
and
And only ...
If...
Then ...
Childr. ro.
Bedroom.
Study
and
99,0
98,0
97,0
Trigger
Adjust value
Device
Push no.
Zone
Choose a device
Living ro.
Bedroom
Childr. ro.
Study
Covigram
Save
All OFF
Play
or
and
And only ...
If...
Ceiling lig.
Then...
coviva Smartbox
Dene actions
 Aelect the types of action via under Then …, in the example Device .
All devices are displayed.
 Select a device - here Ceiling light living.
 By manually triggering, select the switching state of the device (switched on/switched off)
via the buttons provided - in the example Ceiling light living Switched off - and nish with Save.
In the detailed view of the covigram under Then … is displayed.
 Add the remaining lights in the house via under If … in the same way - Wall light living,
Standard lamp, ... -, select the switching state Switched off or when dimming, set the value 0% einstellenusing the scroll wheel and nish with Save.
Now set all blinds in the house to closed.
 Select a device - here Blind kitchen.
The button for ... Set to certain value appears.
 Activate button, using the scroll wheel set the value to 100% (closed) and nish with Save.
In the detailed view of the covigram under Then … is added.
Dene all other blinds in the house in the same way as action.
 Complete the covigram with Save.
The covigram is displayed in the main menu.
...
Set trigger
Play
Trigger covigram with Play button
Wall lig.
Stand. la.
Bedroom
Save
Ceiling lig.
Then...
and
Save
Kitchen
Set trigger
Kitchen
Set to certain value
Blind living room
and
100,0%
100,0
moves
...
Ceiling light living
Switched o
Save
Save
and
my groups
Scene TV
Szene TV
Wohnküche
Eat-in kitchen
my covigrams
Temperature warning
Outdoor light
All OFF
...
hager.com
Figure 16: Covigram for example 3
Page 20/34 05-2019
Page 21
coviva Smartbox
Edit/remove covigram (Figure 17)
 Press i in the top right corner of the main menu.
All elements in the main menu are switched to edit mode.
 Select the covigram to be edited via i on the corresponding Covigram.
Details about the covigram are displayed.
 Then carry out the following changes as required:
– Change the name of the covigram by activating the name line and make an entry via the
keypad. Finish with the Return button.
– Add further triggers under If … (or-linked) or under And only … (and-linked) via the
button.
The page for dening a further trigger opens. Proceed as described above.
– Add further actions under Then … via the button.
The page for dening a further action opens. Proceed as described above.
– Remove a covigram from the main menu via the Delete Covigram button.
To edit or remove an action or trigger that has already been saved, press and hold the
corresponding symbol. Select one of the buttons shown – Edit or Delete – and proceed as described above.
 With the exception of Save, nally conrm all edit operations with Delete Covigram or dis-
card via Back.
The display returns to the main menu and displays the changes.
 Press in the top right corner of the main menu to exit the edit mode.
hager.com
Page 21/34 05-2019
Page 22
Detail
Back
Temperature warning
my groups
Off
Off
Off
Wall light living r...
Scene Tv
Eat-in kitchen
Ceiling light living
Standard lamp s...
Detail
Save
Heati. s.
Heati. k.
Push n.
Zurück
Detail
Heati. s.
Heati. k.
or
Then...
If...
Back
i
my groups
my covigrams
Off
Off
Wall light living room
Scene Tv
Eat-in kitchen
Temperature warning
Standard lamp sofa...
my groups
Off
Off
Wall light living r...
Scene Tv
Eat-in kitchen
Standard lamp s...
coviva Smartbox
Temperature warning
If...
Temperature message
Q
W E R T Y U I O
A S D F G H
Z X C V B N M
.?123
J K L
returnsave
Save
Save
Wall light living r...
Standard lamp...
my groups
Off
Off
Scene Tv
Eat-in kitchen
P
my covigrams
Temperature messa...
Wall light living r...
Standard lamp s...
Off
Off
my covigrams
Temperature warning
And only ...
and
Then...
Delete Covigram
or
If...
...
Heati. s.
Heati. k. Netatmo or
And only ...
and
and
Then...
Push N. Dimmer S. and
my groups
Scene Tv
Eat-in kitchen
my covigrams
Temperature warning
Ceiling light living
Wall light living room
Standard lamp sofa...
my groups
Off
Off
Off
Scene Tv
Eat-in kitchen
my covigrams
my covigrams
hager.com
Figure 17: Edit/remove covigram
Page 22/34 05-2019
Page 23
Favorites
Save
Standard lamp sofa_85105100
Weather station
Outdoor module
Wind gauge
Rain gauge
Favorites
Standard lamp sofa_85105100
Weather station
Outdoor module
Wind gauge
Rain gauge
my covigrams
Eat-in kitchen
Scene Tv
Temperature warning
Outdoor light
All OFF
coviva Smartbox
Add device to the favourites list (Figure 18)
Devices, whose connected loads are frequently operated, can be added for fast access under my favorites.
 To do this, press the orange button.
A list with all devices that have not yet been dened as favourite is displayed.
 Add devices to my favorites by activating the checkbox.
 If necessary, change the order of the devices in the favourites list to the desired sequence
via and using drag & drop.
The new sequence is also applied to the My devices view. Each user can customise the
arrangement as desired.
Dene the devices as favourites with OK.
The favourites are displayed in the main menu.
my favorites
Ceiling light living_TRE202_K1
Wall light living room_TRE202_K1
Alarm system
Save
Ceiling light living_TRE202_K1
Wall light living room_TRE202_K1
Alarm system
my devices
Ceiling light liv...
Wall light livin...
Alarm system
Standard lamp... Off
Weather sta...
Outdoor mod...
Wind gauge
Rain gauge
Figure 18: Dene favourites
Remove device from the favourites list (Figure 19)
 Press i in the top right corner of the main menu.
All elements in the main menu are switched to edit mode.
 Select the device in the favourites list to be removed via i on the relevant device.
Details about the device, such as the switching state and the groups in which the device is integrated, are displayed.
 Press the Remove from Favorites button.
 With Save remove the device from my favorites or discard via Back.
The removed device is no longer displayed in the main menu under my favorites.
 Press in the top right corner of the main menu to exit the edit mode.
Additional devices can be added to or removed from the favourites list in the same way.
Off
Off
22,1°C
9,8°C
1km/h
kein Re.
hager.com
Page 23/34 05-2019
Page 24
my covigrams
my favorites
Off
Eat-in kitchen
Temperature warning
Outdoor kitchen
Alles OFF
Wall light living_...
Groups
None
O
Details
Back
Standard lamp_85105100
my covigrams
Off
Outdoor light
Temperature warning
All OFF
Wall light living_...
coviva Smartbox
my favorites
Ceiling light livin...
Off
Save
Remove from favorites
Remove Device
Figure 19: Remove favourites
Eat-in kitchen
my covigrams
Temperature warning
Outdoor light
All OFF
my favorites
Wall light living_TR...
Off
hager.com
Page 24/34 05-2019
Page 25
coviva Smartbox
Change settings (Figure 20)
Basic changes in the app can be implemented and some information can be viewed under the settings.
 Call up the page for settings under via .
Possible settings or further information are indicated by in the right margin of the corre­sponding line. If such a line is selected, a new page opens with the corresponding setting options (see Table 2).
Conrm any changes to the settings with Save, discard via or return to the previous page
without saving via .
 Finally, exit the settings via .
Setting Selection Information Format/Detail/Action
coviva Smartbox
coviva ID 123456789012
Date/time
Time zone Time period
Language
User (see also Add user (Figure 7)
My account Name First name
All users I
2)
Peter Administrator
English, Francais, Italiano, Deutsch, Svenska, Nederlands, Espanol, Polski, Portugues, Türkce, ...
Administrator all prole data
Country
coviva Version 2.6.7 (cc24680) KNX Version 1.1.13 Alarm Version 1.0.6
Contact E-mail
Prole E-mail (user name) rights
(see above)
DD.MM.JJJJ, hh:mm CET Summer time Germany
Last name
Phone
Change password?
only display, not changeable
Other
Electrician all prole data
unlimited all prole data changeable
Add user see Add user (Figure 7)
Network
WLAN coviva Hotspot function activa-
ted Hotspot function deacti-
2)
The app generally uses the language set in the relevant end device. This setting only denes the language for
emails and push messages.
vated
(see above)
IP address 192.168.178.23 Name coviva - 123456789012
Display of all WLAN networks
only display, not changeable access for electricians for remote maintenance (de) activatable
- Select WLAN network.
- Enter WLAN password.
Table 2: Settings and system information
hager.com
Page 25/34 05-2019
Page 26
Add user
Save
Back
coviva ID
0024C6F21834
09.11.16, 00:00
2.6.7(cc24680)
1.1.13
1.0.6
Date/Time
Settings
coviva Vers.
KNX Version
Alarm Version
Users
Alarm settings
cov.0024C6F21834
Wifi
Amazon Alexa
Connect
Google Assistent
Connect
IP adress
192.168.178.23
Voice Control
Network
i
coviva
Devices
Groups
Covigrams
Favorites
Logout and Handover
O
O
O
my devices
my groups
my covigrams
Off
Off
Off
Wall light living room
Living
Scene TV
Ceiling light living
Standard lamp sofa...
Change
Settings
Settings Wifi settings
Activate the Hotspot mode if want your coviva controller to open up its own Wifi network.
CHOOSE NETWORK…
Change code Change code
What kind of code would
you like to change?
Eletrician Code
Change Code Change Code
Change Code
coviva Smartbox
i
English
Français
coviva Language
Peter
All users
Administration Alarm Co.
English
Installer
Italiano
Deutsch
Svenska
Nederlands
Español
Polski
Português
Master code
Video code
Save
Name
Please indicate the name of the
Name
new User
Forename
Surname
Q
W E R T Y U I O
A S D F G H
Z X C V B N M
Old Code
New Code
Confirm New Code
Musterman
space return.?123
coviva
Max
...
P
J K L
return.?123
...
The IP adress will show here, as soon as you connect your coviva controller via LAN to a router (DHCP).
WLAN
cov.0024C6F21834
The status LED of your coviva controller will turn on when a compliant wifi extension is installed.
App Version 3.3.0
Copyright Hager Group 2015
All rights reserved
Hotspot mode
FRITZ-Box
Figure 20: Call up/change settings
Save
...
hager.com
Page 26/34 05-2019
Page 27
coviva Smartbox

4 Operation

Operating concept

After logging in to the app (see Log in to the app as administrator) the main menu is opened. Distinctions are made between the following categories:
– My devices
– My groups
– My covigrams
– My favourites
You access these categories in the main menu by swiping (mobile app) or scrolling (web app) up or down.
my devices
Blind living room
Dimmer Bedroom
Socket living room
Heating Bedroom
Heating Children
Netatmo Basic
Netatmo Outdoor
my covigrams
i
50%
100%
Off
23,5°C
23,5°C
22,6°C
4,8°C
Alternatively, you can select the desired category directly via .
The sequence of the categories can be changed via using drag & drop.
The individual devices in the My devices category can be sorted via the favourites list (see
Add device to the favourites list).
hager.com
Page 27/34 05-2019
Page 28
i
coviva
Devices
Groups
Favorites
Logout
Off
50%
100%
23,5°C
23,5°C
22,6°C
4,8°C
i
100%
50%
my devices
my covigrams
Off
23,5°C
23,5°C
22,6°C
4,8°C
Dimmer bedroom
Blind living room
Socket living room
Heating bedroom
Heating Children
Netatmo Basic
Netatmo Outdoor
i
coviva
Devices
Groups
Covigrams
Favorites
O
O
O
i
i
i
i
i
i
coviva Smartbox
Covigrams
my covigrams
Temperature warning
Outdoor light
All off
Light
Off
Off
Logout
Ceiling light living
Wall light living ...
Standard lamp ...
my covigrams
Temperature warning
Outdoor light
All off
my groups
my favorites
Wall light living_TR...
Off
i
Off
i
Off
i
i
i
i
Every user can operate all congured applications and retrieve information regardless of the user prole.
The operating concept is intuitive and corresponds to the routines of other app operations. Below is an overview of the basic operating modes and applications in the coviva app (see Tab­le 3).
Instead of a touch operation or a swipe movement, operation via the web app takes place
solely by mouse click or by dragging with the left mouse button pressed down as well as by scrolling.
Display Operation/display Applications (as an example) My devives (Operation):
Open/close the display by touch in the corresponding devices line
Socket living room On
Dimmer Bedroom
Ein
71%
Touch switch ON/OFF
Display of the switching state
Swipe to the left/to the right switch ON/OFF, dim LIGHTER/DAR-
Light control:
- Switch light
- Switch load on socket outlet
Light control:
- Set brightness of a light
KER
Display in % (0%: OFF, 100%: max. brightness)
hager.com
Page 28/34 05-2019
Page 29
coviva Smartbox
Blind Living room
Swipe to the left /to the right
50%
move UP/DOWN
Display in % (0 %: moved up, 100 %: moved down)
30%
Change slat position (blind)
Blind control:
- Movement position of a blind/roller
- Slat position of a blind
Display in % (0% open, 100 % closed)
A "spinner" is displayed in the symbol
eld until the end position is reached.
Awning Terrace
Swipe to the left /to the right
Open
move IN/OUT
Display in % (0 %: retracted, 100 %: ex­tended)
Heating children
21,5°C
23,5°C
Touch / increase/decrease value
Touch on symbol change operating mode
Display of the measured temperature
My devices (Information):
Open the display in setting mode via i on the corresponding devices line
Display the measured sensor values with
Weather stat.
measurements
Temperature
Humidity
CO2
Sound meter
Pressure
1028 mBar
21,9°C
21,3°C
35%
513 ppm
50 dB
i
number and measuring unit
Awning control
- Movement position of an awning
Heating control:
- Adjust setpoint in 0.5°C increments
- Select operating mode Comfort, Night
Physical sensors:
Measured values of a weather station, such as:
- Indoor temperature
- Relative humidity indoors
- CO2 content of the indoor air
- Volume in the room
- Air pressure indoors
shutter
Reduction, Frost Protection
With other modules the corresponding
data must be read off from outdoor sensors.
Display and operation of connected devices of other manufacturers see appendix.
My groups:
Selection by touch on in the corresponding group line
Eat-in kitchenBack
my devices
Wall light living room
All devices of the group are displayed as
i
under My devices and can be operated as described above.
On
My covigrams:
Open/close the display by touch in the corresponding Covigram line
Outdoor light
Outdoor light
All off
Touch activate/deactivate
Touch manual triggering of a scene
Calling up a device list with a touch, for example:
- all lights on the ground oor
- all loads in the living/dining/kitchen
area
Operate several loads simultaneously, event-driven, for example:
- Switch on all outdoor lights at twilight.
If the event has already occurred
when activating a covigram, the stored action is not executed. The covigram must be activated before the event occurs.
- Switch OFF all loads when leaving the
house.
hager.com
Page 29/34 05-2019
Page 30
coviva Smartbox
My favourites: Open/close the display by touch in the corresponding favourites line
Wall light living room
All devices of the favourites list are dis-
On
played as under My devices - but in orange - and can be operated as descri­bed above.
Operate the most-used devices grouped in a list each with a touch
Table 3: Operating concept
The smartbox can be used in the local environment even without an Internet connection pro-
vided that no applications have to be controlled, which only function online, such as remote
access, notications or connected devices of other manufacturers.

Carry out a networkreset

A manual network reset can be performed on the smartbox.
Reset Mode Trigger Consequences of the reset
Network reset Loss of the WLAN
access key
- Resetting of the network settings
- Activation of the local access
Other settings, project and user
proles remain unchanged.
Table 4: Reset
(1)
005587...
GC03/16
ONLINE
WLAN
POWER
(10)
 Keep RESET button (10) pressed for more than 5 seconds, until the RGB LED display (1) is
slowly ashing blue.
 Release RESET button (10) briey and press once again to conrm the selection of the
reset mode.
Rapid blue ashing of the RCB LED display (1) conrms the successful reset.
hager.com
> 5 s 1 x
Figure 21: Network reset
Page 30/34 05-2019
Page 31
coviva Smartbox
RGB LED display
The smartbox has a display (1) for signalling errors that occur or for displaying the process of operations (see Table 5).
signal Cause
Flashing red Critical warning, such as re or burglary
Permanent red light Hardware or software error
Flashing yellow Technical warning, such as low-battery status of a
device in the installation
Flashing blue Update, a software update is being installed
Table 5: RGB LED display (1)

Remote maintenance

The smartbox allows convenient remote access by the electrician in order to work in the project without having to be onsite with the customer.
With remote access it is possible, for example:
– to check the state of the installation
– to adjust the conguration
– to change settings
– to view event logs
– to add or remove users
– to create or change covigrams
Remote access is rst possible after project take over by the administrator. The electrician re­mains authorised to access the Smartbox even after handing over the project, unless the admi­nistrator deliberately deactivates this.
Remote access is possible either via the mobile app or via the web app (see Call up coviva
web app).
hager.com
Page 31/34 05-2019
Page 32
i
coviva
Devices
Groups
Covigrams
Favorites
Logout
O
O
O
i
iii
i
i
My account
Principle
Classic
Max
User
Me
Others
Settings
coviva ID
Date/Time
coviva Language
coviva Vers.
KNX Version
Alarm Version
My account
Settings
0024C6F21831
09.11.16.00:00
English
2.6.7 (cc24680)
1.1.13
1.0.6
Principle
User
Forename
Surname
E-mail
Phone
Usernam.
Rights
Meier
Name
Contact
Profile
Users
mike.fischer@berker.de
mike.fischer@berker.de
Installer
coviva Smartbox
Activate/deactivate remote access
The electrician retains access rights even after the project is handed over, unless the administ­rator deliberately deactivates this.
The Smartbox is online.
 Call up user settings for the electrician directly via the lock symbol, opened in the header.
Or:
 In the main menu press and call up the settings with .
 Select All users.
The Users view is called up.
Select the electrician's user prole.
 Then activate/deactivate the Installation access.
The electrician can once more/no longer edit the project remotely.
Installation access
Meier
All users
Installer
space return.?123
Figure 22: Activate/deactivate remote maintenance
hager.com
Page 32/34 05-2019
Page 33
coviva Smartbox

Appendix

User proles and rights
User prole
Rights Electrician
Dene administrator
Add user
Remove user
Create a new project
Add/delete further connected devices
Add/remove comfort device
Add/remove safety devices
Create groups
Edit/remove groups
Create covigrams
Edit/remove covigrams
Add to favourites
Remove from favourites
Install update before project handover
Install update after project handover
Hand over project
Accept project
Authorise remote maintenance
Carry out remote maintenance
Change settings
Sort categories
Sort devices
3)
These rights apply for the entire project process and during remote maintenance
Table 6: User proles and rights
                      
     
1)
Administrator User name
 
hager.com
Page 33/34 05-2019
Page 34
coviva Smartbox

Further connected devices

Voice command:
– Amazon: Alexa devices
– Google Assistant: Home devices
Temperature control:
– Tado: Smart Thermostat
IP camera:
– Netatmo: IP security cameras
Accessories
WLAN stick TKH180
WLAN adapter TKH181
Replacement requirement
Power supply TKC110
Warranty
We reserve the right to make technical and formal changes to the product in the interest of tech­nical progress.
Our products are under guarantee within the scope of the statutory provisions.
If you have a warranty claim, please contact the point of sale or ship the device postage free with a description of the fault to the appropriate regional representative.
Applicable in all Europe and in Switzerland
Hereby, hager Controls, declares that Coviva is in compliance with the essential requirements and other relevant provisions of directive 1999/5/CE (until June 2017) and directive2014/53/UE (from June 2017).
The CE declaration of conformity can be consulted on the site hagergroup.com
Correct Disposal of This product (Waste Electrical & Electronic Equipment).
(Applicable in the European Union and other European countries with separate collection systems)
This marking shown on the product or its literature indicates that it should not be disposed with other household waste at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this product Save laterfrom other types of wasd-
tes and recycle it responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local government
ofce, for details of where and how they can take this device for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract. This pro­duct should not be mixed with other commercial wastes of disposal.
hager.com
Page 34/34 05-2019
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use