HAGENUK BT 200 User Manual

BT 200

user guide

and

safety instructions

Wireless Bluetooth – Headset

2

Contents

Contents.................................................................. 2

IMPORTANT......................................................... 4

Industry Canada notice to users and product

statements ............................................................... 5

Introduction ............................................................ 6

Charging Hagenuk BT 200...................................11

Pairing Hagenuk BT 200...................................... 14

Wearing Hagenuk BT 200.................................... 18

Switching Hagenuk BT 200 ON and OFF............ 19

Switching Hagenuk BT 200 ON........................... 19

Switching Hagenuk BT 200 OFF......................... 20

Making a call ........................................................ 21

Mobile phone with voice recognition...................22

3

Mobile without voice recognition......................... 23

Answering a call................................................... 23

Rejecting a call ..................................................... 24

Ending a call......................................................... 24

Redial Last Number..............................................25

Adjusting the volume............................................ 25

Muting the microphone ........................................ 27

To mute the microphone during an active call..... 27

To end the mute function......................................27

Transferring a call to the mobile phone................28

Transferring a call to Hagenuk BT 200................ 29

Multi Pairing.........................................................29

Troubleshooting guide..........................................32

Guidelines for safe use ......................................... 33

Included in delivery.............................................. 36

WEEE Directive 2002/96..................................... 37

4

IMPORTANT

Before using your Hagenuk BT 200 headset for
the first time, you must charge it continuously
for about 8 hours, until the blue indicator light
turns on. Please refer to the “Charging
Hagenuk BT 200” section of this manual.

FCC Statement

This device complies with Part 15 of the FCC
rules. Operation is subject to the following two
conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including

5

interference that may cause undesired
operation.

Caution: Changes or modifications to this
Bluetooth® headset not expressly approved by
the Manufacturer could void the user’s
authority to operate the equipment.

Industry Canada notice to users
and product statements

To prevent radio interference to the licensed
service, this device is intended to be operated
indoors and away from windows to provide
maximum shielding. Equipment (or its transmit

6

antenna) that is installed outdoors is subject to
licensing.

Compliance to Industry Canada, technical
specifications have been made in a declaration
of conformity. It does not imply that Industry
Canada approved the equipment.

Bluetooth® is a trademark owned by Bluetooth SIG, Inc. and is used
by the manufacturer under license.

Introduction

The Hagenuk BT 200 headset is a wireless
headset based on the Bluetooth® technology.

7

The Bluetooth® technology is a standard for
wireless short distance radio communications.
Devices like a headset and a mobile phone
can communicate with each other without
wires within approximately 10 meters.

Hagenuk BT 200 is a qualified Bluetooth®
headset that complies with the Bluetooth®

1.1 protocol. It supports two profiles: Headset
Profile and Hands-free profile.
It will work with any qualified Bluetooth®
device that supports the Headset profile or the
Hands-free profile.
To check the list of qualified Bluetooth® mobile
phones working with Hagenuk BT 200, please
consult: www.bluetrek.com

8

Hagenuk BT 200 headset can be used with:

- a qualified Bluetooth® mobile phone (*);

- A non-Bluetooth® mobile phone (*)

connected to the Bluetooth® adaptor
BT07 (optional);

(*) or another Bluetooth® device supporting
the Headset or Hands-free profile. This user
guide is focusing on the use of this Bluetooth®
headset with a Bluetooth® mobile phone,
which is the most common application.
Your Hagenuk BT 200 will allow you to take a
call, initiate a call (if your phone has voice
controls), and adjust volume directly on your
headset, without the need to touch your mobile
phone.

9

The Hagenuk BT 200 headset has 3 buttons:

z "Talk" button (centre button),
z “Volume +" button,
z "Volume –" button.

Charge socket
Ear clip + Volume button

Indicator- Talk button
LED

- Volume button Micro

10

Before using Hagenuk BT 200 headset, you
must:

• Charge the headset; please refer to the
“Charging Hagenuk BT 200” section of this
user guide.

• Pair the headset with a mobile phone.
Please refer to the “Pairing Hagenuk BT
200” section of this manual.

11

Charging Hagenuk BT 200

Your headset is delivered uncharged. So
before the first use, you must fully recharge it
for about 8 hours with the supplied charger,
until the blue indicator light turns on. The use
of any other charger will automatically suspend
the warranty. During subsequent charges, the
charging should take approximately 1 hour 45
minutes.

Please connect the charger to the headset and
to the mains. During the charge, the indicator
light is either red if your headset battery was
excessively discharged, or purple during a

12

normal charge. The indicator light will turn to
blue when the charge is complete.

When you hear a light beep in your headset at
regular intervals, and the indicator light flashes
in red, your headset needs to be recharged.

To maximize battery lifetime, it is
recommended to recharge your headset to full
capacity only when the battery is low, since a
battery has a lifetime of about 500 charging
cycles.

If you leave your headset battery empty for an
extended period of time, it could excessively
discharge the battery. In this case, you may

13

have to charge your headset for 10 hours or
more until the battery recovers and recharges
completely. The indicator light will be red at the
beginning of the charge to recover the battery
capacity, then it will turn to purple for the
normal charging process.
Only switch on the headset once the blue
indicator light turns on, indicating the battery
has fully recovered.

Do not let the battery charger remain plugged
in the headset for more than 24h.

14

Pairing Hagenuk BT 200

Before using the Hagenuk BT 200 headset,
you must pair it with your Bluetooth® mobile
phone. Pairing is the process of linking 2
Bluetooth® devices, so that they can
communicate.

The pairing only needs to be done once.
Afterwards, every time you switch on your
headset, it will automatically connect to your
mobile phone. If you pair your Bluetooth®
mobile phone with another Bluetooth® device,
you will have to pair the Hagenuk BT 200 with
your phone again before use.

15

IMPORTANT : Before pairing, all Bluetooth®
devices must be switched off.

To initiate the pairing, put both the headset and
the mobile phone within 0.3 meter (1 foot) from
each other. Make sure there is no Wi-Fi
equipment operating in the vicinity.

1. Switch on your phone and select the

Bluetooth® discover mode on the
Mobile phone (See the Bluetooth®
mobile phone user guide).

2. Press and hold (do not release it) the

TALK button (see button 1 on page 2)
for about 7 seconds until the indicator
light flashes red and blue alternatively.

16

Then release the TALK Button. A beep
can be heard in the speaker.

3. Once the mobile phone detects the

headset, a message is displayed with
the following information:

“Hagenuk -G2”.

4. Follow the phone instructions to accept

the pairing. The PIN code (or passkey)
is 0000.

5. When the pairing is completed, the

indicator light will switch to blue, and
flashes slowly.

Two audio communication profiles are used by
mobile phones – Headset profile and Hands­free profile. Some mobile phones support only

17

one of them while others support both (details
refer to www.bluetrek.com). Hagenuk BT 200
headsets support both profiles. When pairing a
Hagenuk BT 200 with a dual-profile mobile
phone, Hands-free profile is used by default.
However, some features, such as multi-pairing,
only work under Headset profile. If you wish to
use Headset profile, you have to force the
mobile phone to pair under Headset profile by
pressing the Vol- on your Hagenuk BT 200
headset around 15 seconds until the indicator
light flashes red and blue alternatively. Then
follow the steps above.

If you haven’t started the discovery mode
within 5 minutes, the headset will switch off.

18

You must then switch on your headset and
start the pairing again.

A very limited number of Bluetooth® mobile
phones require a different pairing process that
the one explained above. If you encounter any
difficulties to pair your headset with your
mobile phone, visit our website
www.bluetrek.com or consult your dealer.

Wearing Hagenuk BT 200

The headset can be used on both ears. Rotate
the ear clamp if you want to use it on the other

19

ear. The ear clamp is made of soft material
which can be easily shaped to fit your ear.
Make sure the speaker is properly inserted into
your ear.

Switching Hagenuk BT 200 ON
and OFF

Switching Hagenuk BT 200 ON

Press and hold the TALK button for about 2
seconds until the blue indicator light is on. A
beep (2 tones) can be heard in the speaker.
Release the TALK button.

20

If Hagenuk BT 200 is paired in the Hands-Free
profile, it will try to connect automatically to the
paired Audio Gateway (e.g. mobile phone).

If Hagenuk BT 200 is paired in the Headset
profile, it will stay in standby mode.

Switching Hagenuk BT 200 OFF

Press and hold the TALK button for about 5
seconds until the red indicator light is on after
the quick blue flashes. A beep (2 tones) can be
heard in the speaker. Release the TALK
Button.

21

To save power, the blue indicator light flashes
at long intervals. To check if your headset is
ON , press shortly on the TALK button. If the
indicator light is blue, it means your headset in
ON.

Making a call

The voice recognition (or voice dialling) feature
is not available on all mobile phones. However
you can always dial directly on your keypad. If
your mobile phone offers the voice recognition
feature, you can make a call directly from the
headset without any operation on you mobile
phone.

22

Mobile phone with voice
recognition

• Make sure the voice recognition function

on your mobile is activated and your
voice tags have been recorded with the
phone.

• Press the TALK button shortly (when

there is no incoming and no active Call).
The audio connection is established.

• Wait for the audio signal sent by the

mobile phone (generally a short tone).

• Speak out the name of person you wish

to call, as stored in the phone voice

23

tags. The mobile phone will dial the
stored number.

Mobile without voice recognition

• Make sure both the headset and the

mobile phone are ON and in stand-by
mode.

• Dial the phone number you wish to call

on your mobile phone.

• After roughly 2 seconds, the audio

connection is established.

Answering a call

When the headset rings, press the TALK
button shortly.

24

Rejecting a call

Press the TALK button for about 2 seconds
when the headset is ringing.
This function only works in the Hands-Free
Profile.

Ending a call

Press the TALK button shortly to end an active
call.

25

Redial Last Number

Press the TALK button for about 2 seconds if
there is no active call and no incoming call,
until you hear a beep.
This function only works in the Hands-Free
Profile.

Adjusting the volume

The headset has been designed with one
VOL+ button, and one VOL- button. However,
to make the headset perfectly ergonomic and
symmetrical, whether you use it on your left or
right ear, it has been designed with 2 back
buttons (VOL+) and 2 front buttons (VOL-). But
only 1 VOL+ button is functional to adjust the

26

volume up, and only 1 VOL- button is
functional to adjust the volume down.

So to increase the volume during an active
call, make sure you press shortly and gently on
both back buttons (VOL+) simultaneously.

And to decrease the volume during an active
call, make sure you press shortly and gently on
both front buttons (VOL-) simultaneously.

27

Muting the microphone

To mute the microphone during an
active call

Press on both VOL+ buttons, or on both VOL­buttons, simultaneously for about 2 seconds.
A periodic tone is heard in the speaker while
the microphone is muted.

To end the mute function

When the microphone is muted, a short press
on both VOL+ buttons, or on both VOL-

28

buttons, simultaneously will end the mute
function and the periodic tone will disappear.

Transferring a call to the mobile
phone

During an active call, press the TALK button
for about 2 seconds.
This function only works in the Hands-Free
Profile.

In the Headset profile, you can simply turn off
your headset.

29

Transferring a call to Hagenuk
BT 200

During an active call on the mobile phone,
press the TALK button shortly on the headset
to transfer the call from the mobile phone to
the headset.

Multi Pairing

Hagenuk BT 200 can be paired to two Mobile
Phones (Audio Gateways).

30

In the following description, the last paired
Audio Gateway will be called Primary Phone,
and the previously paired phone will be called
Secondary Phone.

For instance :
Your headset is already paired with a NOKIA
8910 mobile phone.

You perform a pairing with a SONY
ERICSSON T68i phone :

- your SONY ERICSSON T68i phone
will be the Primary Phone,

- your NOKIA 8910 phone will be the
Secondary Phone.

31

You perform a second pairing with a SONY
ERICSSON T39:

- your SONY ERICSSON T39 phone
will be the Primary Phone,

- your SONY ERICSSON T68i phone
will be the Secondary Phone.

All outgoing calls from Hagenuk BT 200 are
sent only to the Primary Phone.

However, an incoming call on any phone
(primary or secondary) will be sent to your
Hagenuk BT 200 headset, and it can be
answered on the headset (if Hagenuk BT 200
has no link established with the other phone
which is not receiving the latest incoming call).

32

The multi-pairing only works with handsets
which are both in the Headset profile. Please
refer to “Pairing Hagenuk BT 200” in this
manual for details.

(Note: all brand names are the property of their
respective owners).

Troubleshooting guide

In general, the first thing you should do when
encountering a problem that you cannot solve
with this manual, is to switch off your headset

33

and your mobile phone, and switch them on
again.

To find out more, please consult our website:

www.bluetrek.com.

An automatic reset is done each time the
headset is either charged or switched off. So in
case of problem or if your headset cannot
switch off, please charge your headset for at
least 30 seconds.

Guidelines for safe use

Read those guidelines before using your
headset.

34

- Do not drop or try to alter the shape of

your Headset.

- Do not expose your headset to liquid or
moisture.

- Do not expose your headset to extreme
temperatures. Temperature range : 0­40C.

- Do not expose your headset to fire or
open flames.

- Do not try to disassemble your headset.
Service and Maintenance can only be
performed by authorized Bluetrek®
dealers.

- Keep your headset away from dust and
dirt.

35

- Do not let children play with your

headset, since it contains small parts
that could become detached and create
a choking hazard.

- Check the regulation in your area if you
plan to use your headset while driving.

- Turn off your headset before boarding
an airplane.

CAUTION : Danger of explosion if battery is
incorrectly replaced. Replaced only with the
same or equivalent type. (voltage : 3.1 – 5.5V,
typical 3.8V, typical current 40mA)

36

Included in delivery

1 Hagenuk BT 200
1 AC/DC Adapter 230V~/50Hz
5,4V-/190mA
1 Adapter for Car
1 Cabel for car adapter
1 carrying bag with belt clip

37

WEEE Directive 2002/96

National regulation by 13.08.2004 !
Product marking after 13.08.2005 !