3846 mm
8 mm
8 mm
8 mm
Edition : 1.0
Date: (12/24)
Instruction Manual
PROFESSIONAL SERIES
MOBILE WORK STATION
Order Code: (T6890)
www.machineryhouse.com.au / www.machineryhouse.co.nz
www.machineryhouse.com.au / www.machineryhouse.co.nz
1
DS-660
1
BEFORE ASSEMBLING
OIL
DAILY
Please read this instruction manual before assembly.
Before assembly please pay attention to the following points in priority;
Conrmation of components: Before assembling, please conrm all parts arrived and are in good order.
Site for assembly:
Please assemble it on the soft oor such as smooth carpet and annel blanket. When you
assemble on wooden oor, please put thin towels on the oor.
Points for attention when assembling: Please wear gloves to ensure that it can be assembled safely, and use
two persons to help in the assembly process.
SAFETY INFORMATION
1. Do not pull this workstation, push it when moving.
2. Engage both brakes when this workstation is not being moved. This prevents the workstation rolling
away.
3. Secure this workstation properly before moving with a forklift.
4. Do not tow this workstation with power equipment.
5. Do not alter this workstation in any manner. For Example. Do not weld external lock bars or attach
electrical equipment.
6. Before locking the workstation, ensure the drawers are completely closed in order for the lock bars to
work properly.
CAUTION: Do not attach or mount this product to a
vehicle. This may cause personal injury or product
damage. Mounting this product to any vehicle in
any manner will void warranty.
CAUTION: Do not stand on this product. You may
fall which may cause personal injury or product
damage.
CAUTION: Be careful when opening more than one
drawer. The product may become unstable and
tip, which may cause personal injury or product
damage.
CAUTION: Keep the product on level surfaces. The
product may become unstable and tip if stored or
moved on an un-level surface, which may cause
personal injury or product damage.
CAUTION: Lock the drawers before moving this
product. The drawers could come open and make
the product unstable and tip, which may cause
personal or product damage.
2
SPECIFICATIONS
Overall size: 1141 x 730 x 725mm (WxDxH)
Overall with casters: 1141 x 730 x 888mm (WxDxH)
Package size: 1190 x 770 x 1036mm (WxDxH)
6 drawers: 570 x 410 x 83mm (30kg Per Drawer)
2 drawers: 570 x 410 x 112mm (30kg Per Drawer)
2 drawers: 570 x 410 x 228mm (50kg Per Drawer)
Nett Weight: 173kg
Fixed Wheels (x2) Swivel Brake
Wheels (x2)
Shelves (x2) Hanging Hooks
(x8)
Trolley Handle
(x1)
M10x20mm
Bolts, Washers &
Spring Washers
(x16)
Keys (x4) Drawer Liners
(x10)
M6x16mm Bolts
(x4)
10G x 15mm
Screws (x4)
3
ASSEMBLY INSTRUCTIONS
TOOLS & ASSISTANCE NEEDED
10,16mm spanners.
Philips Head Screwdriver
*Tools not included
STEP 1.
Handle Installation
• Position the side handle in-line with the holes on the
workstation.
• Attach with 4x M6x16mm bolts and tighten with a
10mm spanner/socket as shown in Fig. 1.
STEP 2.
Attaching the Wheels
• Be sure the drawers are locked and lay the cabinet on
its top. Use packaging material or a blanket to protect
the nish of the workstation.
• Attach the swivel brake wheels to the base of the
workstation on the same side as the handle, using
M10x20mm bolts, washers and spring washers as
shown in Fig. 2. Tighten using a 16mm spanner/
socket.
• Repeat this process for the xed wheels on the
opposite side of the workstation.
• Return the workstation to its upright position.
4
Fig. 1
Fig. 2
ASSEMBLY INSTRUCTIONS
Cont...
TOOLS & ASSISTANCE NEEDED
10,16mm spanners.
Philips Head Screwdriver
*Tools not included
STEP 3.
Storage Holders Installation
• Position the storage holders in-line with the holes on
the workstation.
• Attach with 2x 10Gx15mm screws per storage holder
and tighten with a Philips head screwdriver as shown
in Fig. 3.
Fig. 3
5
OPERATION
1. 2.
Removing the drawers
• Release the drawer latch and fully extend the
empty drawer.
• Push up one release lever while pulling down
on the other release lever.
• Pull the drawer outward until it is released
from the drawer slide and fully remove drawer
from the slides.
Re-inserting the drawers
• Extend the drawer slides.
• Insert the brackets on each side of the drawer
into the slots in the slides, being careful that
they are properly positioned.
• Once properly inserted, completely close
the drawer to set the slides in their proper
positions and make sure you go all the way
in to engage the drawer latch.
Drawer Latch
MAINTENANCE
1. Wheel maintenance: Grease the wheels annually using high-quality bearing grease.
2. Drawer maintenance: Lubricate the slides semi-annually with high-quality bearing grease.
6
NOTES:
7
OIL
DAILY
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should
be sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment.
When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into
approved containers and dispose of the product and fluids according to local regulations.
Imported by
Australian Distributor
Hare & Forbes
Machineryhouse
Sydney - Melbourne
Adelaide - Brisbane - Perth
Ph: 1300 202 200
www.machineryhouse.com.au
New Zealand Distributor
Machineryhouse
Auckland
Christchurch
Ph: 0800 142 326
www.machineryhouse.co.nz
Loading...