habitat JAMB-LC-SS18-A User guide

Jambi. MultiColour Lounge Chair

AssemblyInstructions - Please keepfor future reference

JAMB-LC-SS18-A

Dimensions

Width-99cm
Depth-84cm

Height-83cm

1 2 1

Important – Please read these instructions before assembly

If you need help or have damaged or missing parts, email:

[e-mail] or call: 0344 499 4686

Take care when moving furniture -

dragging it across the floor will loosen

and damage the joints. Always lift and

move.

This furniture can be kept outside all

year around, however we advise

covering it or moving it to a sheltered

area during prolonged wet weather and

the winter months. If covering please

ensure the furniture is completely dry

first, and that the cover allows airflow.

Do not leave standing in water.

Important: Recommended

maximum load for this

lounge chair is 120KG.

Dust regularly with a clean dry cloth.

The use of furniture polish or spray is
not necessary or recommended.

Remove stubborn stains with weak
washing up solution and a damp cloth

and then wipe dry with a clean dry

duster.

Wipe up any spills immediately with a

damp cloth and then dry the surface

with a clean dry duster.

If paintwork finish on frame becomes

chipped or damaged, please treat
exposed area with rust inhibitor

immediately and then touch up with a

colour matching paint that is suitable
for use on metalwork.

Never use abrasive cleaners as they
will scratch the finish.

Do NOT clean with the following or

products containing the following:
Acetone (e.g. nail varnish remover),
Ammonia (e.g. bleach) or Sodium
hydroxide (e.g. Caustic soda, drain

and oven cleaners). In the event of

accidental contact rinse thoroughly
with water.

2

If you need help or have damaged or missing parts, email:

Components

Please check you have all the panels listed below

Note: There are ‘Batch Code’ lables where shown on the indicated items, these should be retained.

BC

[e-mail] or call:

0344 499 4686

1 2

A

Assembly Instructions

B

C D

Please keep safe for future reference

Before assembling the furniture please identify all component parts.
It would be sensible to assemble the furniture as close to its final position as possible.

Do not place furniture directly in front of radiators, fires or any source of heat.
Ensure the surface on which you are assembling the furniture is flat and clear of anything that might scratch it.
Check all packaging carefully for components and fittings before discarding it.

3

Assembly Instructions

Step 1

C

B

A

D

Step 2

1 2 1

4