
Safety and Care Advice
4’ Bed Grey Fabric 954/0554
4’ Bed Grey PU 943/2947 4’6 Bed Grey PU 940/6007
4’ Bed Black PU 951/4827
4’6 Bed Black PU 944/8010
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
Keep children and animals
away from the work area, small
parts could choke if swallowed.
Make sure you have enough
space to layout the parts before
starting.
This product has been
constructed to be used in the
domestic environment only and
not for commercial purposes.
Care and maintenance
Only clean using a damp cloth
and mild detergent. Do not use
abrasive cleaners.
Use a dry cloth to clean the
product, furniture polish is
not recommended.
Assemble the item as close
to its final position (in the same
room) as possible.
Assemble on a soft level
surface to avoid damaging the
unit or your floor.
From time to time check that there
are no loose screws, nuts or bolts.
If there are please re-tighten.
We do not
recommend the
use of power
drill/drivers for
inserting screws
as this could damage the unit.
Only use hand screwdrivers.
Parts of the assembly will be
easier with 2 people.
Dispose of all packaging
carefully and responsibly.
This product should not be
discarded with household
waste.Take to your local
authority waste disposal
centre.
Important Ottoman Safety Warnings
Caution.This bed uses a pressurised mechanism.
Use caution when operating - Always use two hands at arm’s length, and only where illustrated on the
product.
You must ensure the mattress is on the bed frame before lifting the mechanism - Failure to do so may
result in injury.
Please ensure Children and pets are kept away from the bed when operating the bed mechanism.
If removing the mattress, make sure that the frame is secured as it could flip open.
Only use the storage compartment when when the frame is fully raised in the ‘up’ position.
No children or animals are left unattended when the frame is in the ‘up’ position.
Do not remain on the bed whilst the lifting mechanism is in use.
Beware of Entrapment - Keep both hands clear of mechanism when operating the mechanism.
When lifting the bed remove all bedding - Except the fitted sheet.
ENSURE MATTRESS IS ON
BEFORE LIFTING
Sainsbury's Argos is a trading name of both: Argos Limited, Registered office: 489-499 Avebury Boulevard, Milton Keynes, United
Kingdom, MK9 2NW, registered number: 01081551 (England and Wales); and Sainsbury's Supermarkets Limited, Registered
office: 33 Holborn, London, EC1N 2HT, registered number: 03261722 (England and Wales). Both companies are subsidiaries of J
Sainsbury's plc. Argos (N.I.) Ltd, Forestside Shopping Centre, Upper Galwally, Belfast, United Kingdom, BT8 6FX. Argos Distributors
(Ireland) Limited, Unit7, Ashbourne Retail Park, Ballybin Road, Ashbourne, County Meath, Ireland.
2
DON'T LIFT WITHOUT MATTRESS

Fittings (Shown to scale)
A
C
8mm Bolt x 4
E
Nut x 6
G
B
8x25mm Bolt x 488x45mm Bolt x 10
D
12mm Spring washer x 32
F
17mm Flat washer x 54
22mm Flat washer x 4
Note: All fittings packed inside the back of the headboard
3

Parts
Side rail x 2
1
(4'/4'6-1930 x 305mm)
INSIDE
INSIDE
FRONT
Footboard x1 (4'-1300 x 305mm)
2 3
(4'6-1450 x 305mm)
Note: Packed inside the back
of the headboard
Wooden rail x2 (4'/4'6-800 x 40mm)
4
Bentwood slats x 28 (4'-598 x 9 x 53mm)
6
Bentwood slats x 28 (4'6-675 x 9 x 53mm)
Note: Packed inside the back
of the headboard
7
Headboard x1 (4'-1350 x 860mm)
(4'6-1500 x 860mm)
Hinge Mechanism (x 1 pair)
5
NOTE: PISTON ATTACHED
Fabric base x 1 (4'-1965 x 1280mm)
(4'6-1965 x1430mm)
Note: Packed inside the back
of the headboard
Mattress support bracket x 2
8
Note: Packed inside the back
of the headboard
10
Ottoman end frame (Footboard) x 1
(4'-1213 x 85mm)(4'6-1363 x 85mm)
Note: Packed inside the back
of the headboard
4
Ottoman end frame (Headboard) x 1
9
(4'-1213 x 85mm)(4'6-1363 x85mm)
Note: Packed inside the back
of the headboard
11 Ottoman frame (Sides) x 2
(4'/4'6-1822 x 30mm)

Parts
12
Ottoman frame centre support x 1
(4'/4'6-1822 x 30mm)
Note: Extra holes
14 15
Support Leg x 1 (25 × 205mm)
Note: Packed inside the back
of the headboard
Metal corner plate x 4 (169 x 35mm)
16
Note: Packed inside the back
of the headboard
13 Double slat caps x 14 (4'-55mm)
Double slat caps x 14 (4'6-55mm)
Note: Packed inside the back
of the headboard
Single slat caps x 28 (4'-55mm)
Single slat caps x 28 (4'6-55mm)
Note: Packed inside the back
of the headboard
5

WARNING!
The headboard is heavy.
Lift with care.
Components packed inside back of headboard
Unzip
3
Shown upside down
2
A
C
8mm Bolt x 4
E
Nut x 6
G
22mm Flat washer x 4
B
8x25mm Bolt x 488x45mm Bolt x 10
D
12mm Spring washer x 32
F
17mm Flat washer x 54
B
8x25mm Bolt x 12
3
D
12mm Spring washer x 12
B
D
F
B
D
F
F
17mm Flat washer x 12
B
D
F
3
Leave screws loose
2
B
D
F
2
7

5mm Allen key x 1
3
3
1
1
B
D
2
F
1
Do not fully tighten fixings!
4
8x25mm Bolt x 8
3
1
12mm Spring washer x 8
F
B
D
1
17mm Flat washer x 8
3
F
2
5mm Allen key x 1
1
16
D
B
Ensure frame is square
8

A
F
G
4'
8x45mm Bolt x 4
8x25mm Bolt x 10B17mm Flat washer x 10
Opening from right side
Headboard fixing holes position
3
L
E
F
R
I
E
R
T
H
F
I
T
R
E
R
H
E
L
E
F
R
I
E
T
H
22mm Flat washer x 4
5mm Allen key x 1
Beware of risk of entrapment
from folding hinges!
Headboard fixing holes position
3
5
R
F
I
T
R
E
R
H
E
L
E
F
R
I
E
T
H
F
I
T
4'6
4
G
A
Footboard fixing holes position
R
F
I
T
R
E
R
E
H
L
E
R
F
E
I
T
H
2
G
E
R
E
R
H
F
IT
R
E
R
E
H
4
L
F
I
T
Footboard fixing holes position
5
E
R
F
I
E
H
2
A
Headboard fixing holes position Headboard fixing holes position
3
3
5
R
L
E
R
F
I
E
R
T
H
F
I
T
R
E
R
H
E
F
I
T
R
E
R
H
E
L
E
R
F
E
I
T
H
L
F
I
T
4
G
A
F
B
L
E
R
F
I
E
T
H
F
B
L
E
R
F
I
E
T
H
F
B
Footboard fixing holes position
R
F
I
T
R
E
R
E
H
L
E
R
F
I
E
T
H
2
L
E
R
F
E
I
R
T
H
F
I
T
R
E
R
E
H
G
A
Footboard fixing holes position
5
L
E
F
R
E
I
T
H
2
4
E
R
E
H
F
B
9

A
F
G
4'
8x45mm Bolt x 4
8x25mm Bolt x 10B17mm Flat washer x 10
Opening from left side
Headboard fixing holes position
3
L
L
E
F
R
E
I
T
H
F
I
T
R
E
R
H
E
4
Footboard fixing holes position
L
L
E
F
R
E
I
T
H
G
A
22mm Flat washer x 4
5mm Allen key x 1
Beware of risk of entrapment
from folding hinges!
Headboard fixing holes position
3
5
F
I
T
R
E
R
E
H
R
E
R
F
I
T
R
E
R
E
H
F
B
Footboard fixing holes position
4'6
10
F
I
T
R
E
L
R
H
E
L
E
R
F
I
E
T
H
2
L
E
R
E
H
F
I
T
R
E
R
E
H
4
3
L
L
E
R
F
E
I
T
H
F
I
T
R
E
R
E
H
F
I
T
R
L
E
R
H
E
L
E
R
F
E
I
T
H
G
A
Footboard fixing holes position
F
I
T
R
L
E
R
E
H
L
E
R
F
E
I
T
H
2
L
L
E
R
F
E
I
T
H
F
I
T
R
E
R
E
H
4
G
A
L
F
I
T
F
I
T
R
E
R
E
H
2
G
A
F
B
5
T
Headboard fixing holes positionHeadboard fixing holes position
3
5
R
E
F
I
T
R
E
R
H
4
E
R
F
B
Footboard fixing holes position
F
I
T
H
2
5
F
I
T
R
E
R
H
E
F
B

13
Important
Two people required.
Frame to be fully
supported at all times.
5
Box spanner x 1
A
10
5
F
E
10
9
5
Beware of risk of entrapment
from folding hinges!
UP
3
5
17mm Flat washer x 6
F
Nut x 6
E
5mm Allen key x 1
8x45mm Bolt x 6
A
Spanner x 1