FRESH
STAND MERCHANDISING W/ LEG LEVELERS
LOCK ASSEMBLY RIGHT SIDE ES28 V2
096039I095493LOCK SL DOOR ES16/18 ESM/
Merchandising Stand ESM5
Designed specifically for installing an ESM5 Counter-Top Cold Space
Merchandiser® as a floor standing refrigerator. Merchandising Stand has
been designed for maximum structural strength while allowing
merchandising of overstock or complimenting products.
I
TAND MERCHANDISING W
TERS ESM
Swing Door Lock SE Solid Doors
Designed for use on SE28 and SE46 models which are designed to accept
optional door locks. I097273, pictured above is for SE28 , and C096617
(inset) is used for SE46 models where doors are notched to accept hasp,
respectively. Receiving bracket is already installed on SE46 models.
L
I09727
K ASS'Y CAM SE2
17
LOCK SOLID DOOR SE28/4
Side Saddle Door Lock
Field installable non-pilfer locking system is exclusive to HABCO®. Loc
system allows after-market installation of door lock on free-standing swing
door Cold Space Merchandisers®. Available in chrome finish with two keys
Specify left or right hand mounting when ordering
K
EMBLY LEFT SIDE ES28 V2
Sliding Door Lock
Field installable non-pilfer locking system allows after-market installation o
door lock on most current and previous HABCO® sliding door Cold Space
Merchandisers® and Commercial Refrigerators. Available in chrome finis
with two keys. Please specify refrigerator or Cold Space Merchandiser
model when ordering.
I
LIDING DOOR H4
L
R42
Saddle Door Lock
Field installable non-pilfer locking system is exclusive to HABCO®. Loc
system allows after-market installation of door lock on older model Counter
Top ES6 and ES6GE and current ESM10/12. swing door Cold Spac
Merchandisers®. Available in chrome finish with two keys.
EMBLY KEY ALIKE E
Door Lock ESM Counter-Tops
Designed specifically for mounting to ESM Cassette® equipped CounterTop Cold Space Merchandisers®, this non-pilfer door lock mounts to th
side of the cabinet, mid-door. Available in chrome finish with two keys.
Same lock fits both left and right door swing applications.
K097213KIT LOCK SWING DOOR ESM
Caster Kit Low Profile 3.75" High
Low Profile Casters are shipped four per kit and are easily threaded into the
existing leveler leg mounts. One Caster Kit fits all HABCO® free-standing
refrigerators, freezers and Cold Space Merchandisers®.
Kit contains four casters, two standard and two with with pinch brakes.
KIT CASTER 3.75" HIGH W/SIDE PINCH BRAKE
HABCO BEVERAGE SYSTEMS INC. 501 GORDON BAKER ROAD • TORONTO • ONTARIO • CANADA • M2H 2S6 • T(800)387-5398 • F(416)-491-6982 • www.habcotech.com
Specifications subject to change without notice. © HABCO Beverage Systems Inc. "HABCO, Cold Space, GlideSet" and HABCO Graphic Designs are trademarks of
HABCO Beverage Systems Inc. HABCO®, Cassette® and Cold Space Merchandiser® are a registered trademarks of HABCO Beverage Systems Inc.
Caster Kit 5" High
Casters are shipped four per kit and are easily threaded into the existing
leveler leg mounts. One Caster Kit fits all HABCO® free-standin
refrigerators, freezers and Cold Space Merchandisers®.
vailable in chrome finish with toe-locks on two casters.
K09711
TER KIT 5" HIGH SWIVEL - TWO LOCKIN
Back-Up Cassette® - Foodservice
HABCO®'s innovative refrigeration Cassette® refrigeration system allows
you to purchase a spare refrigeration system which can be exchanged in
less than five minutes without opening the door. Cassette®s are available
for all HABCO® refrigerators and merchandisers. Foodservice Cassette®'s
feature coated cooling coils to protect against corrosion to due foodstuffs.
N0107
ETTE SE18M
ETTE SE18SX
ETTE SE2
ETTE SE42/4
Dving Cold Space from Commonplace to Invention!
10925079
FRESH
GLIDESET 600ML/20oz ESM28
Back-Up Cassette® - Beverage
HABCO®'s innovative refrigeration Cassette® refrigeration system allows
you to purchase a spare refrigeration system which can be exchanged in
less than five minutes without opening the door. Cassette®s are available
for all HABCO® refrigerators and merchandisers.
N010612
ETTE ESM
ETTE ESM28 V4
ETTE ESM42/46 V4
GlideSet™ Gravity Bottle Dividers
HABCO® Gravity GlideSet™ Beverage Dividers allow enhanced
organization and merchandising. GlideSets™ are available standard to
accomodate 600ml bottles, 355ml cans, and Longneck Beer Bottles and
are equipped with dividers,glides and ticket strip extrusions. Available in
white finish with installation instructions for flat or gravity applications. Order
one GlideSet™ per shelf.
LIDESET
LIDESET
12
M42
HABCO BEVERAGE SYSTEMS INC. 501 GORDON BAKER ROAD • TORONTO • ONTARIO • CANADA • M2H 2S6 • T(800)387-5398 • F(416)-491-6982 • www.habcotech.com
Specifications subject to change without notice. © HABCO Beverage Systems Inc. "HABCO, Cold Space, GlideSet" and HABCO Graphic Designs are trademarks of
HABCO Beverage Systems Inc. HABCO®, Cassette® and Cold Space Merchandiser® are a registered trademarks of HABCO Beverage Systems Inc.
Dving Cold Space from Commonplace to Invention!
10501079