H3C WX3000 Series Unified Switches
Switching Engine Configuration Guide
Hangzhou H3C Technologies Co., Ltd.
http://www.h3c.com
Document Version: 6W103-20100705
Copyright © 2008-2010, Hangzhou H3C Technologies Co., Ltd. and its licensors
All Rights Reserved
No part of this manual may be reproduced or transmitted in any form or by any means without prior
written consent of Hangzhou H3C Technologies Co., Ltd.
Trademarks
Notice
H3C, , Aolynk, , H3Care,
SecPro, SecPoint, SecEngine, SecPath, Comware, Secware, Storware, NQA, VVG, V
, TOP G, , IRF, NetPilot, Neocean, NeoVTL,
2
G, VnG, PSPT,
XGbus, N-Bus, TiGem, InnoVision and HUASAN are trademarks of Hangzhou H3C Technologies Co.,
Ltd.
All other trademarks that may be mentioned in this manual are the property of their respective owners.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute the warranty of any kind, express or implied.
Preface
The H3C WX3000 Series Unified Switches Switching Engine Configuration Guide describes the
software features for the H3C WX3000 series unified switches switching engin e and guides you through
the software configuration procedures. It also provides configuration examples to help you apply
software features to different network scenarios.
This preface includes:
z Audience
z Document Organization
z Conventions
z About the H3C WX3000 Series Documentation Set
z Obtaining Documentation
z Documentation Feedback
Audience
This documentation is intended for:
z Network planners
z Field technical support and servicing engineers
z Network administrators working with the H3C WX3000 series unified swit ches switching engine
Document Organization
The H3C WX3000 Series Unified Switches Switching Engine Configuration Guide comprises these
parts:
CLI Login
Auto Detect Voice VLAN GVRP
Link Aggregation Port Isolation Port Security-Port Binding DLDP
MAC Address Table
Management
MAC Address
Authentication
QoS-QoS Profile Mirroring ARP SNMP-RMON
Multicast NTP SSH
MSTP 802.1x and System Guard AAA
IP Address and
Performance
Configuration File
Management
DHCP ACL
VLAN
Basic Port
Configuration
File System
Management
FTP-SFTP-TFTP Information Center
HWPing DNS Smart Link-Monitor Link PoE-PoE Profile
Routing Protocol UDP Helper Appendix
System Maintenance and
Debugging
VLAN-VPN
Conventions
This section describes the conventions used in this documentation set.
Command conventions
Convention Description
Boldface Bold
italic
[ ]
{ x | y | ... }
[ x | y | ... ]
{ x | y | ... } *
[ x | y | ... ] *
&<1-n>
# A line that starts with a pound (#) sign is comments.
text represents commands and keywords that you enter literally as shown.
Italic text represents arguments that you replace with actual values.
Square brackets enclose syntax choices (keywords or arguments) that are
optional.
Braces enclose a set of required syntax choices separated by vertical bars,
from which you select one.
Square brackets enclose a set of optional syntax choices separated by vertical
bars, from which you select one or none.
Asterisk marked braces enclose a set of required syntax choices separated by
vertical bars, from which you select at least one.
Asterisk marked square brackets enclose optional syntax choices separated by
vertical bars, from which you may select multiple choices or none.
The argument or keyword and argument combination before the ampersand (&)
sign can be entered 1 to n times.
GUI conventions
Convention Description
Boldface
Window names, button names, field names, and menu items are in Boldface.
For example, the
New User
window appears; click OK.
>
Symbols
Convention Description
Network topology icons
Convention Description
File
Multi-level menus are separated by angle brackets. For example,
Folder
>
Means reader be extremely careful. Improper operation may cause bodily
injury.
Means reader be careful. Improper operation may cause data loss or damage to
equipment.
Means an action or information that needs special attention to ensure
successful configuration or good performance.
Means a complementary description.
Means techniques helpful for you to make configuration with ease.
Represents a generic network device, such as a router, switch, or firewall.
.
>
Create
Convention Description
Represents a routing-capable device, such as a router or Layer 3 switch.
Represents a generic switch, such as a Layer 2 or Layer 3 switch, or a router
that supports Layer 2 forwarding and other Layer 2 features.
About the H3C WX3000 Series Documentation Set
The H3C WX3000 series documentation set also includes:
Manual Description
H3C WX3000 Series Unified Switches
Installation Manual
H3C WX3000 Series Unified Switches
Switching Engine Command Manual
H3C WX Series Access Controllers User
Manual
It introduces the installation process, startup, hardware and
software maintenance of WX3000 Series unified switches.
Elaborates on the operation commands for WX3000 series unified
switches switching engines. It covers the operation commands for
CLI, login, VLAN, GVRP, basic port configurations, MAC address
table management, MSTP, 802.1x, AAA, ACL, QoS, SNMP,
RMON, NTP, and SSH.
Provides a guide to the operation of H3C series access
controllers. It covers configurations of CLI, VLAN, system
maintenance and debugging, WLAN, IPv4, IPv6, port basic
configurations, multicast protocols, 802.1x, AAA, SSH, ACL, QoS,
description of the acronyms used throughout the manual, and a
command index.
H3C WX Series Access Controllers
Web-Based Configuration Manual
Obtaining Documentation
You can access the most up-to-date H3C product documentation on the World Wide Web at
http://www.h3c.com
.
Click the links on the top navigation bar to obtain different categories of product documentation:
[Technical Support & Documents > Technical Documents]
upgrading, and software feature configuration and maintenance documentation.
[Products & Solutions]
– Provides information about products and technologies, as well as solutions.
[Technical Support & Documents > Software Download]
the software version.
Documentation Feedback
You can e-mail your comments about product documentation to info@h3c.com.
We appreciate your comments.
Introduces the Web-based functions of the access control engine
of WX3000 series unified switches.
– Provides hardware installation, software
– Provides the documentation released with
Loading...