H3C SecPath U200-A/U200-M/U200-S
Unified Threat Management Products
Hangzhou H3C Technologies Co., Ltd.
http://www.h3c.com
Document version: 6PW106-20130820
Installation Guide
Copyright © 2008-2013, Hangzhou H3C Technologies Co., Ltd. and its licensors
All rights reserved
No part of this manual may be reproduced or transmitted in any form or by any means without prior
written consent of Hangzhou H3C Technologies Co., Ltd.
Trademarks
3
H3C, , H3CS, H3CIE, H3CNE, Aolynk, , H
Care, , IRF, NetPilot, Netflow,
SecEngine, SecPath, SecCenter, SecBlade, Comware, ITCMM and HUASAN are trademarks of
Hangzhou H3C Technologies Co., Ltd.
All other trademarks that may be mentioned in this manual are the property of their respective owners
Notice
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute the warranty of any kind, express or implied.
Environmental protection
This product has been designed to comply with the environmental protection requirements. The storage,
use, and disposal of this product must meet the applicable national laws and regulations.
Preface
v
The H3C SecPath U200-A/U200-M/U200-S Unified Threat Management Products Installation Guide
includes seven chapters, which describe the product overview, preparing for installation, installing the
firewall, accessing the firewall for the first time, replacement procedures, hardware management and
maintenance, and troubleshooting.
This preface includes:
• Audience
• Conventions
• About the H3C SecPath U200-A/U200-M/U200
• Obtaining documentation
• Technical support
• Documentation feedback
Audience
This documentation is intended for:
• Network planners
• Field technical support and servicing engineers
• Network administrators working with the H3C SecPath U200-A/U200-M/U200-S UTM device
Conventions
This section describes the conventions used in this documentation set.
Command conventions
Con
ention Description
-S UTM products documentation set
Boldface Bold text represents commands and keywords that you enter literally as shown.
Italic Italic text represents arguments that you replace with actual values.
[ ] Square brackets enclose syntax choices (keywords or arguments) that are optional.
{ x | y | ... }
[ x | y | ... ]
{ x | y | ... } *
[ x | y | ... ] *
Braces enclose a set of required syntax choices separated by vertical bars, from which
you select one.
Square brackets enclose a set of optional syntax choices separated by vertical bars, from
which you select one or none.
Asterisk marked braces enclose a set of required syntax choices separated by vertical
bars, from which you select at least one.
Asterisk marked square brackets enclose optional syntax choices separated by vertical
bars, from which you select one choice, multiple choices, or none.
Convention Description
p
&<1-n>
# A line that starts with a pound (#) sign is comments.
GUI conventions
Convention Descri
Boldface
> Multi-level menus are separated by angle brackets. For example, File > Create > Folder.
Symbols
Convention Description
WARNING
CAUTION
IMPORTANT
NOTE
The argument or keyword and argument combination before the ampersand (&) sign can
be entered 1 to n times.
tion
Window names, button names, field names, and menu items are in Boldface. For
example, the New User window appears; click OK.
An alert that calls attention to important information that if not understood or followed can
result in personal injury.
An alert that calls attention to important information that if not understood or followed can
result in data loss, data corruption, or damage to hardware or software.
An alert that calls attention to essential information.
An alert that contains additional or supplementary information.
TIP
Network topology icons
An alert that provides helpful information.
Represents a generic network device, such as a router, switch, or firewall.
Represents a routing-capable device, such as a router or Layer 3 switch.
Represents a generic switch, such as a Layer 2 or Layer 3 switch, or a router that supports
Layer 2 forwarding and other Layer 2 features.
Represents an access controller, a unified wired-WLAN module, or the switching engine
on a unified wired-WLAN switch.
Represents an access point.
Represents a security product, such as a firewall, a UTM, or a load-balancing or security
card that is installed in a device.
Represents a security card, such as a firewall card, a load-balancing card, or a
NetStream card.
Port numbering in examples
The port numbers in this document are for illustration only and might be unavailable on your device.
About the H3C SecPath U200-A/U200-M/U200-S
gory
UTM products documentation set
The H3C SecPath U200 series UTM products documentation set includes:
Cate
Product description and
specifications
Hardware specifications
and installation
Software configuration
Operations and
maintenance
Documents
Marketing brochures
(U200-A)
Marketing brochures
(U200-M)
Marketing brochures
(U200-S)
Installation guide
H3C UTM License
Registration and
Activation Guide
Configuration guides
Command references
Configuration examples
Release notes (U200-A)
Release notes (U200-M)
Release notes (U200-S)
Purposes
Describe product specifications and benefits.
Provides a complete guide to hardware installation
and hardware specifications.
Describes how to apply for a license and register the
license.
Describe software features and configuration
procedures.
Provide a quick reference to all available
commands.
Describe typical network scenarios and provide
configuration examples and instructions.
Provide information about the product release,
including the version history, hardware and software
compatibility matrix, version upgrade information,
technical support information, and software
upgrading.
Obtaining documentation
You can access the most up-to-date H3C product documentation on the World Wide Web
at http://www.h3c.com
Click the links on the top navigation bar to obtain different categories of product documentation:
[Technical Support & Documents > Technical Documents]
upgrading, and software feature configuration and maintenance documentation.
[Products & Solutions]
[Technical Support & Documents > Software Download]
software version.
.
—Provides hardware installation, software
—Provides information about products and technologies, as well as solutions.
—Provides the documentation released with the
Loading...