H3C S3600-28F-EI, S3600-28P-SI, S3600-28P-PWR-EI, S3600-28P-PWR-SI, S3600-52P-SI Datasheet

SWITCHING

H3C S3600

Overview

H3C S3600 Series Ethernet Switches are a new generation of premier
multi-layer switches that entirely fulfill the enterprise requirement for
design and implementation of a unified, highly resilient network. One of
the most important and innovative highlights of the S3600 Series
Ethernet Switches is the IRF (Intelligent Resilient Framework)
technology which offers the highly efficient advantage of stackable
technology. IRF enables network managers to build adaptable
networks with high reliability, scalability and easy management. “Pay as
you go” is the slogan of the S3600 Series Ethernet Switches.

H3C S3600 Series Ethernet Switches include the following models:
S3600-28P-SI, S3600-28TP-SI, S3600-28P-EI, S3600-28F-EI,
S3600-28P-PWR-EI, S3600-28P-PWR-SI, S3600-52P-SI,
S3600-52P-EI, S3600-52P-PWR-SI and S3600-52P-PWR-EI.

Features

Full wire-speed, multi-layer switching

u The S3600 Series offer L2/L3 wire-speed switching capability for

all ports. The system offers 4 GE ports to meet the requirement of
a single piece of equipment for multiple Gigabit uplinks and for
access to the Gigabit server, thereby greatly increasing savings
on equipment investment.

u The hardware supports L3 wire-speed switching, and is able to

identify and process the application traffic flows from L2~L4.

u All ports have an independent data packet filter, and distinguish

specific application flows for different management and control.

IRF Technology

Intelligent Resilient Framework (IRF) is an innovative resilient network
technology that allows enterprise customers to design and implement
Fast Ethernet core and aggregation that are adaptable, providing
exceptional reliability, scalability and easy management. With IRF
technology, the S3600 Series switches can be interconnected together
to behave as a single logical switching entity called a Distributed Fabric.

From management and configuration perspectives, the Fabric appears
as a single device, while from a performance perspective, each switch
in the Distributed Fabric can make its own forwarding decisions, both at
Layer 2 and Layer 3 for traffic that appears on its ports.

The IRF technology provides: DDM (Distributed Device Management),
DRR (Distributed Resilient Routing) and DLA (Distributed Link
Aggregation).

u Distributed Device Management (DDM)

Distributed Device Management is the control system for IRF
technology, responsible for distributing management and control
information across the IRF Distributed Fabric.

u Distributed Resilient Routing (DRR)

Distributed Resilient Routing, provided by Enhanced Image, is an
advanced routing implementation that allows multiple
interconnected switches in an IRF Distributed Fabric to behave as
a single active routing entity.

u Distributed Link Aggregation (DLA)

Distributed Link Aggregation, provided by Enhanced Image,
allows networks and IRF Distributed Fabrics to be coordinated

SWITCHING

2

with switches at the edge of the network. DLA guarantees high
levels of resilience since failure in one of the members of the
Aggregated Link results in automatic redistribution of traffic across
the remaining links.

Excellent PoE (Power over Ethernet) Supply Function

The S3600 Series Switches support PoE function for the LAN switching
infrastructure, which provides power over a copper Ethernet cable to an
endpoint (Powered Device).

H3C S3600

based on source MAC address、destination MAC address、VLAN、
source IP address、destination IP address, ports and protocols.

u The S3600 Series supports flexible queue scheduling algorithms,

which can be set on the basis of port and queue at the same time.
They support Strict Priority (SP), Weighted Round Robin(WRR),
Weighted Fair Queuing (WFQ), SP+WRR, and SP+WFQ; 8
priority queues and 2 drop precedence; WRED congestion
avoidance algorithm and port traffic shaping.

u The S3600 Series switches provide up to 48 simultaneous

full-powered PoE ports at 15.4W for maximum powered-device
support, such as IP telephony and wireless LAN deployments. As
PSE (Power Sourcing Equipment) devices, all S3600 series
Switches are 802.3af compliant PoE switches.

u With PoE and Voice VLAN technology, these innovative switches

can provide the perfect solution for a converged voice and data
network.

High reliability

u The S3600 Series supports STP/RSTP/ MSTP, greatly improving

redundant back-up for links and fault tolerance capability, so the
network can run with high levels of stability.

u The S3600 Series supports the optional RPS (Redundant Power

Supply, provided by Enhanced Image), thus improving the fault
tolerance capability and normal network operation duration.

u The S3600 Series supports VRRP (provided by Enhanced Image),

and can build a VRRP back-up group with other L3 switches. In
this way, a redundant route topological structure can be built so
that when a fault occurs in guaranteeing communication
continuity and reliability, network stability is maintained.

u The S3600 Series supports the VRRP backup group port tracking

function. As long as this function is enabled, customers can elect
to track the link state of the master’s uplink port and decrease the
priority of the switch when the port fails. This in turn triggers the
new master to be determined in the backup group.

u The S3600 Series supports ECMP (Equal Cost Multi-path

Protocol, provided by Enhanced Image) routing, which can be
used for load balance and routing redundancy.

Abundant QoS policies

u The S3600 Series supports Committed Access Rate (CAR) and

limits the traffic speed at 64Kbit/s granularity.

u The S3600 Series can configure the Priority for Protocol Packets.

Each protocol packet has its own priority. Customers can modify
the priority of the protocol packet with the help of relevant QoS
commands.

Flexible security control policies

u The S3600 Series supports ARP detection to guard against ARP

spoofing launching by hackers or attackers. According to the ARP
detection function, the switches check the validity of the ARP
packets using the DHCP-Snooping table or the manually
configured IP bonding table. You can also set trusted ports. ARP
packets coming from the trusted ports will not be checked, while
those from other ports will be checked through the
DHCP-Snooping table or the manually configured IP binding
table.

u The S3600 Series supports 802.1x authentication to identify users

who attempt to access the network. With the 802.1x client version
checking function enabled on a switch, the switch checks the
version and validity of the 802.1x client running on supplicant
systems to prevent those using earlier versions of the 802.1x
client or illegal clients from logging in.

u The S3600 Series supports Centralized MAC address

authentication. It controls accesses to a network through ports
and MAC addresses. This kind of authentication requires no client
software. When operating in centralized MAC address
authentication mode, a switch begins to authenticate the user if it
detects a new user MAC address. Additionally, the S3600 Series
can perform 802.1x authentication and MAC address-based
authentication simultaneously.

u The S3600 Series supports L2~L4 complex flow classification

u The S3600 Series supports the Guest VLAN function. This

SWITCHING

3

S3600-28P-SI / S3600

-

28P-EI /

S3600-52P-SI / S3600

-

52P-EI /

function enables supplicant systems that are not authenticated to
access specific resources and thus perform the corresponding
operations, such as obtaining the 802.1x client, upgrading the
client, or obtaining other upgrading programs.

u The S3600 Series can also prevent unauthorized access to the

network by binding any combination of MAC, IP and PORT.

Diversified System Configuration and management modes

u The S3600 Series supports Simple Network Management

Protocol (SNMP) v1/v2/v3 and RMON (Remote Monitoring) v1,
1/2/3/9 groups of MIBs. These can be managed by a general
network management platform such as OpenView, and H3C iMC
network management system.

u The S3600 Series supports Command Line Interface (CLI), Web

based network management, modem dial-up and TELNET, all of
which make the equipment management more convenient.

u The S3600 Series supports HGMP V2 cluster management. After

enabling HGMP V2, the network administrator can manage
several member switches through one command switch and only
the command switch needs a public network IP address. This can
add up to large public IP address savings and also contributes
significantly to more effective network management.

H3C S3600

Abundant System Maintenance and debugging methods

u The S3600 Series supports DLDP (Device Link Detection

Protocol). DLDP can detect the link status of the optical fiber cable
or copper twisted pair. If DLDP finds a unidirectional link, it
disables the related port automatically or informs users to disable
it manually depending on the specific configuration, to avoid
potential network problems.

u The S3600 Series supports Loopback detection on ports. After

users enable loopback detection for Ethernet ports, the switch will
monitor whether the ports have loopback on a regular basis. If the
switch detects loopback for a particular port, then it will put that
port under control.

u The S3600 Series supports VCT (Virtual Cable Test), convenient

for troubleshooting. Customers can start the virtual cable test
(VCT) to make the system test the cable connected to the current
electrical Ethernet port. The test items include: whether a short or
open circuit exists in the Rx/Tx direction of the cable, and the
length of the cable in normal status or the length from the port to
the fault point of the cable.

Specifications

Port Configuration

Fixed ports

Extended Ports

Extended Module

S3600-28P-PWR-SI/S3600-28P-

(1) 24 10/100 BASE-TX
Ethernet ports ;
(2) 1 console port

4 1000M SFP
extended ports

(1) SFP-GE-T
(2) SFP-GE-SX (850nm, 0.55km)
(3) SFP-GE-LX (1310nm, 10km)
(4) SFP-GE-LH40 (1310nm, 40km)
(5) SFP-GE-LH40 (1550nm, 40km)
(6) SFP-GE-LH70 (1550nm, 70km)
(7) SFP-GE-LH70 -CW (1470nm, 70km)
(8) SFP-GE-LH70 -CW (1490nm, 70km)
(9) SFP-GE-LH70 -CW (1510nm, 70km)
(10) SFP-GE-LH70 -CW (1530nm, 70km)
(11) SFP-GE-LH70 -CW (1550nm, 70km)
(12) SFP-GE-LH70 -CW (1570nm, 70km)
(13) SFP-GE-LH70 –CW (1590nm, 70km)
(14) SFP-GE-LH70 -CW (1610nm, 70km

PWR-EI

(1) 24 10/100
BASE-TX Ethernet ports;
(2) 2 10/100/1000 BASE-T
Ethernet ports ;
(3) 1 console port

2 1000M SFP extended ports 4 1000M SFP extended ports

S3600-28TP-SI

S3600-52P-PWR-SI/

S3600-52P-PWR-EI

(1) 48 10/100
BASE-TX
Ethernet ports;
(2) 1 console
port

(1) SFP-GE-T
(2) SFP-GE-SX (850nm, 0.55km)
(3) SFP-GE-LX (1310nm, 10km)
(4) SFP-GE-LH40 (1310nm, 40km)
(5) SFP-GE-LH40 (1550nm, 40km)
(6) SFP-GE-LH70 (1550nm, 70km)
(7) SFP-GE-LH70 -CW (1470nm, 70km)
(8) SFP-GE-LH70 -CW (1490nm, 70km)
(9) SFP-GE-LH70 -CW (1510nm, 70km)
(10) SFP-GE-LH70 -CW (1530nm, 70km)
(11) SFP-GE-LH70 -CW (1550nm, 70km)
(12) SFP-GE-LH70 -CW (1570nm, 70km)
(13) SFP-GE-LH70 -CW (1590nm, 70km)
(14) SFP-GE-LH70 -CW (1610nm, 70km)
(15) SFP-FE-SX (1310nm, 2km)
(16) SFP-FE-LX (1310nm, 15km)
(17) SFP-FE-LH40 (1310nm, 40km)
(18) SFP-FE-LH80 (1550nm, 80km)

(1) 24 100BASE-FX SFP ports;
(2) 2 10/100/1000 BASE-T
Ethernet ports ;
(3) 1 console port

2 1000M SFP
extended ports

S3600-28F-EI

SWITCHING

4

Features

S3600-SI S3600-EI

Switching Fabric

Switching mode

SDRAM

Buffer

Flash

Layer 2 switching

Layer 3 Switching

Convergence

H3C S3600

Wire speed L2/L3
switching

IRF Stack

PoE

MAC Address

VLAN

Link Aggregation

Mirroring

Flow Control

Link Layer Reliability

Wire speed forwarding on all ports
Switching capacity (28/52 ports): 12.8Gbps/17.6Gbps
Packet forwarding speed (28/52 ports): 9.53Mpps/11.78Mpps

32G bps
Store and forward
64M
32M
8M 16M
RMON on IRF

HGMP on IRF
Peer fabric port testing

Support Basic IRF stack (DDM, Dynamic link aggregation across
devices), up to 8 units, stacking bandwidth is 4G bps.

Supported by S3600-28P-PWR-SI/EI and S3600-52P-PWR-SI/EI
RPS is supported by all except S3600-28P-SI and S3600-52-SI

l 16K MAC addresses
l Adding of dynamic/static unicast MAC address, multicast MAC address, and black hole MAC Address

l 4K VLANs (IEEE 802.1Q)
l GVRP(GARP VLAN Registration Protocol)
l Support Port-based VLAN
l Protocol-based VLAN
l QinQ
l Voice VLAN

l Support LACP
l Aggregation of FE/GE ports: Up to 8 FE or 4 GE ports in each aggregation group
l Support up to 12 aggregation groups

l Many-to-one port mirroring (multiple monitored ports to one monitor port N:1)
l Traffic mirroring

l IEEE 802.3x full-duplex flow control
l Port bandwidth percentage-based Broadcast storm suppression

l IEEE 802.1D Spanning Tree Protocol (STP)
l IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
l IEEE 802.1s Multiple Spanning Tree Protocol instances (MSTP)
l BPDU Tunnel
l Support Smart Link

Support Enhanced IRF Stack (DDM、DDR、DLA through LACP and
across devices), up to 8 units, stacking bandwidth is 4G bps.
Peer fabric port testing

IP Routing

Multicast

Mirroring

DHCP

QoS

ACL

l Static routing
l RIP v1/ v2
l OSPF v2 ,ECMP (EI)
l VRRP(EI)

l IGMP snooping
l IGMP v1 and v2,PIM-DM,PIM-SM,MSDP(EI)

l Many-to-one port mirroring (that is, multiple mirroring ports, and one monitor port)
l RSPAN(EI)
l Traffic mirroring

l DHCP Snooping
l DHCP Relay
l DHCP Client
l DHCP server(EI)
l DHCP option 82

l Packet redirection
l Eight output queues on each port
l Support flexible queue scheduling algorithms: SP,WRR,WFQ,SP+WRR,SP+WFQ
l Support the 802.1p priority, and the DSCP priority.
l Support flow rate limitation.
l Support packet limitation
l Support re-labeling the 802.1p and DSCP priorities of a packet.

l L2~L4 Packet filter providing filtering based on source/destination MAC address, source/destination IP address, port, protocol, VLAN, VLAN

range, MAC address range, or invalid frame

l Support the time range.

SWITCHING

5

Features

S3600-SI S3600-EI

Security

Management/ Maintenance

Outline Dimensions

Security Features

Managementand
Maintenance

Hardware configuration

(HxWxD)mm

Weight

Input Voltage

Maximum System Power
Consumption

MTBF

Noise Parameter

Environment

l Support Centralized MAC address authentication
l Support Port isolation
l Support MAC address black hole
l Support MAC Address Learning Limit
l Prevent unauthorized access to the network by binding of MAC, IP and PORT
l Support SSH V2 (Secure Shell)
l Support Port security
l Support ARP detection
l Support IP source check
l Support EAD(endpoint admission defense)
l Support IEEE 802.1X user authentication
l Guest VLAN
l Support HWTACACS authentication
l Support HTTPS

l Support CLI (Command Line Interface) ,console port ,Telnet configuration mode
l Support System configuration with SNMP v1/v2/v3
l Support HGMP V2
l Support RMON (Remote Monitoring) v1/v2/v3/v9 groups of MIBs
l Support H3C iMC , Web-based network management
l Detailed alarm/debug information output
l Support Ping, Tracert, HWping
l Support remote maintenance via Telnet Modems and SSH
l Support System log
l Hierarchical alarm management and alarm filtering
l Support DLDP (Device Link Detection Protocol)
l Support LLDP/LLDP-MED
l Saving debugging information into Flash
l Loopback detection on ports
l Support VCT (Virtual Cable Test)

• S3600-28P-SI/ S3600-52P-SI/ S3600-28TP-SI/ S3600-28P-EI/ S3600-52P-EI/ S3600-28F-EI: 43.6*440*260 mm

• S3600-28P-PWR-SI/ S3600-52P-PWR-SI/ S3600-28P-PWR-EI/ S3600-52P-PWR-EI: 43.6*440*420 mm

• S3600-28P-SI/S3600-28TP-S/S3600-28P-EI/ S3600-28F-EI: 3.5kg

• S3600-52P-SI/ S3600-52P-EI: 4kg

• S3600-28P-PWR-SI/ S3600-28P-PWR-EI: 5.8kg

• S3600-52P-PWR-SI/ S3600-52P-PWR-EI: 6.2kg

All S3600-EI series and S3600-28P-PWR-SI can be AC-powered and DC-powered (except S3600-28P-SI & S3600-52P-SI).
AC: 100v ~ 240V AC50/60Hz
DC: -48 ~ -60V DC

40W (S3600-28P-SI/S3600-28P-EI/S3600-28TP-SI)
50W (S3600-52P-SI/S3600-52P-EI)
65W (S3600-28F-EI)
450W (S3600-28P-PWR-SI/ S3600-28P-PWR-EI, AC input)
Dissipated power: 150W
PoE: 300W
430W (S3600-28P-PWR-SI/ S3600-28P-PWR-EI, DC input)
Dissipated power: 60W
PoE: 370W
465W (S3600-52P-PWR-SI/ S3600-52P-PWR-EI, AC input)
Dissipated power: 165W
PoE: 300W
820W (S3600-52P-PWR-SI/ S3600-52P-PWR-EI, DC input)
Dissipated power: 80W
PoE: 740W
RPS(all EI series and S3600-28P-PWR-SI, S3600-52P-PWR-SI support)

S3600-28P-SI: 57.1 years
S3600-52P-SI: 51.8 years
S3600-28P-EI: 45.9 years
S3600-52P-EI: 42.4 years
S3600-28P-PWR-SI/ S3600-28P-PWR-EI: 29.5 years
S3600-52P-PWR-SI/ S3600-52P-PWR-EI: 26.9 years
S3600-28TP-SI: 84.5 years
S3600-28F-EI: 51.9 years

S3600-28P-SI/EI : 40.1dBA
S3600-28TP-SI: 41.1dBA
S3600-52P-SI/EI: 46.5dBA
S3600-28F-EI: 51.3dBA
S3600-28P-PWR-SI/EI: 47.3dBA
S3600-52P-PWR-SI/EI: 46.3dBA

Operation temperature: 0°C ~ 45°C
Storage temperature: -40°C ~ 70°C
Operating humidity: 5% to 85% non-condensing
Relative humidity: 10% ~ 90%, non-condensing

H3C S3600

SWITCHING

6

Industry standards support

u Ethernet Protocol

IEEE 802.1D (STP)
IEEE 802.1p (CoS)
IEEE 802.1Q (VLANs)
IEEE 802.1s (MSTP)
IEEE 802.1w (RSTP)
IEEE 802.1Q(GVRP)
IEEE 802.1X (Security)
IEEE 802.3i (10BASE-T)
IEEE 802.3u (Fast Ethernet)
IEEE 802.3x (Flow Control)
IEEE 802.3z (Gigabit Ethernet)
IEEE 802.3ad (Link Aggregation)
IEEE 802.3p (four levels of priority)
IEEE 802.3ac (VLAN Tag Frame Extension )

u Administration Protocol

RFC 1812 (IPv4)
RFC 826 (ARP)
RFC 959 (FTP)
RFC 783 (TFTP)
RFC 768 (UDP)
RFC 791 (IP)
RFC 792 (ICMP)
RFC 793 (TCP)
RFC 2622 (Routing policy)
RFC 2474 (Diffserv)
RFC 2131 (DHCP)
RFC 1058 (RIPv1)
RFC1723 (RIPv2)
RFC 2328 (OSPF v2)
RFC 3101 (NSSA)
RFC 2370 (OSPF Opaque LSA Option)
RFC 1765 (OSPF Database Overflow)
RFC 2338 (VRRP)
RFC 2362 (PIM-SM)
RFC 1112 (IGMPv1)
RFC 2236 (IGMPv2)
RFC 2865 (RADIUS Authentication)
RFC 2866 (RADIUS Accounting)
RFC 2869 (RADIUS Extensions)
RFC 2267 (Network Ingress Filtering)

H3C S3600

RFC 1157 (SNMP)
RFC 1902 (SNMPv2)
RFC 854 (Telnet)
RFC 896 (Congestion control in IP/TCP network)
RFC 925 (Multi-LAN ARP/Proxy ARP)
RFC 1122 (Requirements for Internet Hosts)
RFC 1156 (TCP/IP MIB)
RFC 1212 (Concise MIB definitions)
RFC 1213 (MIB for Network Management of TCP/IP based internets
(MIB II))
RFC 1757 (RMON (groups 1 2 3 and 9))
RFC 1901 (Community based SNMPv2)
RFC 2573 (SNMPv3 Applications)
RFC 2576 (Coexistence between SNMP V1, V2, V3)
RFC 2597 (Assured Forwarding PHB group (partial support))
RFC 2618 (RADIUS Authentication Client MIB)
RFC 2620 (Radius Accounting MIB)
RFC 2819 (Remote Network Monitoring MIB (group 1,2,3,9))
RFC 2865 (Remote Authentication Dial In User Service)
RFC 2869bis (Radius Support for Extensible Authentication Protocol
(EAP))
RFC 2932IP (Multicast Routing MIB)
RFC 3046 (DHCP/BootP Relay)

Safety and Compliance

u Emissions / Agency Approvals

CISPR 22 Class A
FCC Part 15 Class A
EN 55022 Class A
ICES -003 Class A
VCCI Class A
AS/NZS 3548 Class A
EN 61000-3-2
EN 61000-3-3

u Immunity Product conforms to:

EN 55024: 1998
EN 61000-4-2
EN 61000-4-3
EN 61000-4-4
EN 61000-4-5
EN 61000-4-6
EN 61000-4-11

SWITCHING

7

H3C S3600

u Safety Agency Certifications

UL 60950 3rd ed.
IEC 60950: 1999, corr. Feb. 2000; all national deviations
EN 60950: 2000, ZB and ZC deviations

CSA 22.2 No. 950 3rd ed., 1995
AS/NZS 60950:2000, Australia

Networking Application

Broadband Ethernet Access for Residential Community

For the broadband Ethernet access of a residential community, the S3600 series are usually located in the center of the community. In the downlink
direction, users can access the S3600 series via another switch such as the S3100 series; in the uplink direction, the S3600 series can be connected
to the core layer-3 equipment via GE and finally to the WAN backbone network.

Network of Small Enterprise

In a small enterprise network, S3600 series can serve as the backbone switches, which connect to the network of headquarters or other branches.
When the size of the enterprise increases, the network can also be easily expanded by using the IRF technology supported by the S3600 series. As
the size of the enterprise continues to increases, the network can also be easily further expanded.

SWITCHING

8

H3C S3600

Large Enterprise Network

In a large enterprise network, the S3600 series are located at the access layer. The S3600 series can be connected to devices with IRF stack
technology; in the uplink direction, the S3600 series are connected to the layer-3 switch through the GE expansion module. The diagram below
formulates the Gigabit-to-backbone and 100 Mbps-to-desktop network-wide solutions for the Intranet.

Service and Support (3Com APR)

Global Services offers the resources and talents of a major corporation
plus more than two decades of experience in resolving network
challenges and delivering business benefits to enterprises around the
world.

Global support with a personalized, local focus in the local language
helps drive productivity and minimize expenses. Because we understand
both the technology and the business, we’re the partner you need to
remain strong and competitive.

Suggested Service, Support and Training Offerings

GuardianSM Maintenance Service

ExpressSM Maintenance Service

Network Health Check

Network Installation and Implementation Services

Education and Training Self-paced and instructor-led technology and product courses, plus certification programs

This service provides comprehensive on-site support and includes advance hardware replacement, expedited telephone
technical support and software upgrades
Note: May not be available in some countries

This service provides speedy access to H3C shipment of advance hardware replacements (including a four-hour option),
expedited telephone technical support and software upgrades

An activity-auditing service focused on improving network performance and productivity
Includes traffic monitoring, utilization analysis, problem identification, and asset deployment recommendations
Extensive report provides blueprint for action

Experts set up and configure equipment and integrate technologies to maximize functionality and minimize business disruption
For large and complex sites, implementation services include personalized configuration, project management, extended

testing and coaching on network administration

Product Warranty

The H3C S3600 has a Limited Lifetime hardware warranty that includes the power supply and fan assembly.

SWITCHING

9

BOM Code

Name Des

cription

0235A10G

0235A10J

0235A10H

0235A10K

0235A10F

0235A10C

0235A10E

0235A10B

0235A10D

0235A10L

BOM Code

Name Description

0231A562

0231A563

02312170

02312172

02312173

0231A085

0231A453

0231A454

0231A455

0231A456

0231A449

0231A450

0231A451

0231A452

0231A54T

0231A11U

0231A11V

BOM Code

Name Description

0231A320

0231A564

0231A089

0231A090

0231A12T

Order Information

Host

H3C S3600

Optical GE Modules

LS-3600-28P-SI-OVS

LS-3600-52P-SI-OVS

LS-3600-28P-EI-OVS

LS-3600-52P-EI-OVS

LS-3600-28TP-SI-OVS

LS-3600-28P-PWR-EI-OVS

LS-3600-52P-PWR-EI-OVS

LS-3600-28P-PWR-SI-OVS

LS-3600-52P-PWR-SI-OVS

LS-3600-28F-EI-OVS

SFP-GE-SX-MM850-A 1000BASE-SX SFP Transceiver, Multi-Mode (850nm, 550m, LC)
SFP-GE-LX-SM1310-A 1000BASE-LX SFP Transceiver, Single Mode (1310nm, 10km, LC)
SFP-GE-LH40-SM1310 1000BASE-LH40 SFP Transceiver, Single Mode (1310nm, 40km, LC)
SFP-GE-LH40-SM1550 1000BASE-LH40 SFP Transceiver, Single Mode (1550nm, 40km, LC)
SFP-GE-LH70-SM1550 1000BASE-LH70 SFP Transceiver, Single Mode (1550nm, 70km, LC)
SFP-GE-T 1000BASE-T SFP
SFP-GE-LH70-SM1470-CW 1000BASE-LH70 CWDM SFP Transceiver, Single Mode (1470nm, 70km, LC)
SFP-GE-LH70-SM1490-CW 1000BASE-LH70 CWDM SFP Transceiver, Single Mode (1490nm, 70km, LC)
SFP-GE-LH70-SM1510-CW 1000BASE-LH70 CWDM SFP Transceiver, Single Mode (1510nm, 70km, LC)
SFP-GE-LH70-SM1530-CW 1000BASE-LH70 CWDM SFP Transceiver, Single Mode (1530nm, 70km, LC)
SFP-GE-LH70-SM1550-CW 1000BASE-LH70 CWDM SFP Transceiver, Single Mode (1550nm, 70km, LC)
SFP-GE-LH70-SM1570-CW 1000BASE-LH70 CWDM SFP Transceiver, Single Mode (1570nm, 70km, LC)
SFP-GE-LH70-SM1590-CW 1000BASE-LH70 CWDM SFP Transceiver, Single Mode (1590nm, 70km, LC)
SFP-GE-LH70-SM1610-CW 1000BASE-LH70 CWDM SFP Transceiver, Single Mode (1610nm, 70km, LC)
SFP-STACK-Kit SFP Stacking Cable (150cm,including two 1000BASE-T SFP module and one stacking cable)
SFP-GE-LX-SM1310-BIDI 1000BASE-LX BIDI SFP Transceiver, Single Mode (TX1310/RX1490, 10km, LC)
SFP-GE-LX-SM1490-BIDI 1000BASE-LX BIDI SFP Transceiver, Single Mode (TX1490/RX1310, 10km, LC)

H3C S3600-28P-SI Ethernet Switch with 24 10/100BASE-TX Ports and 4 1000BASE-X Ports (SFP Req.) (AC
110/220V)

H3C S3600-52P-SI Ethernet Switch with 48 10/100BASE-TX Ports and 4 1000BASE-X Ports (SFP Req.) (AC
110/220V)

H3C S3600-28P-EI Ethernet Switch with 24 10/100BASE-TX Ports and 4 1000BASE-X Ports (SFP Req.) (AC
110/220V, DC 48V)

H3C S3600-52P-EI Ethernet Switch with 48 10/100BASE-TX Ports and 4 1000BASE-X Ports (SFP Req.) (AC
110/220V, DC 48V)

H3C S3600-28TP-SI Ethernet Switch with 24 10/100BASE-TX ports, 2 1000BASE-X Ports (SFP Req.) and 2
10/100/1000BASE-T Ports (RJ45) (AC 110/220V)

H3C S3600-28P-PWR-EI Ethernet Switch with 24 10/100BASE-TX ports and 4 1000BASE-X Ports (SFP Req.) (AC
110/220V, DC -48V)

H3C S3600-52P-PWR-EI Ethernet Switch with 48 10/100BASE-TX Ports and 4 1000BASE-X Ports (SFP Req.) (AC
110/220V, DC -48V)

H3C S3600-28P-PWR-SI Ethernet Switch with 24 10/100BASE-TX ports and 4 1000BASE-X ports (SFP Req.) (AC
110/220V, DC -48V)

H3C S3600-52P-PWR-SI Ethernet Switch with 48 10/100BASE-TX Ports and 4 1000BASE-X Ports (SFP Req.) (AC
110/220V, RPS DC -48V)

H3C S3600-28F-EI Ethernet Switch with 24 100BASE-FX Ports(SFP Req), 2 1000BASE-X Ports(SFP Req)and 2
10/100/1000BASE-T Ports(RJ45)(AC 110/220V,DC 48V)

Optical FE Modules for S3600-28F-EI

SFP-FE-SX-MM1310-A 100BASE-FX SFP Transceiver, Multi-Mode (1310nm, 2km, LC)
SFP-FE-LX-SM1310-A 100BASE-LX SFP Transceiver, Single Mode (1310nm, 15km, LC)
SFP-FE-LH40-SM1310 100BASE-LH40 SFP Transceiver, Single Mode (1310nm, 40km, LC)
SFP-FE-LH80-SM1550 100BASE-LH80 SFP Transceiver, Single Mode (1550nm, 80km, LC)
SFP-FE-LX-SM1310-BIDI 100BASE-LX BIDI SFP Transceiver, Single Mode (TX1310/RX1550, 15km, LC)

SWITCHING

10

Visit

www.h3c.com

for more information about H3C enterprise solutions.

BOM Code

Name Description

0213A01T

0404A03V

BOM Code

Name Description

0213A01S

0213A01G

0404A053

0404A054

0404A055

BOM Code

Name Description

0404A04V

RPS 500-A for S3600-28P-EI, S3600-52P-EI, S3600-28F-EI

AC-RPS500-A3 RPS500-A3 Power with 125W/12V output and 375W/48V output
CAB-Pwr-1m-PS3FP-I RPS500-A3 Power cable V

RPS 1000-A for S3600-28P-PWR-SI, S3600-52P-PWR-SI,S3600-28P-PWR-EI, S3600-52P-PWR-EI,S3600-28F-EI

AC-RPS1000-A3 Redundant Power Supply, 2 PSU slots, with 1 PSU1500 module and 5 connector cables
AC-Flatpack1500-M Power Supply Unit with 600W (AC 110V) or 1450W (AC 220V) (optional)
CAB-RPS PoE-2m-JD5 Cable A with JD5 type connector (optional)
CAB-RPS Non PoE-2m-JD5-A Cable with JD5-A type connector for Non-PoE switches (optional)
CAB-RPS Non PoE-2m-JD5 Cable B with JD5 type connector (optional)

SPARE DC CABLE FOR S3600

CAB-48V Pwr-2m-T2.5^2 Non-PoE Switch DC Power Input Cable-2m (optional)

H3C S3600

Copyright © 2009 H3C Technologies, Co., Ltd. All rights reserved. H3Cand the H3C logo are in various countries worldwide registered trademarks of H3C
Technologies Co., Ltd., a subsidiary of 3Com Corporation. TippingPoint is in various countries worldwide a registered trademark of TippingPoint
Technologies, Inc., a subsidiary of 3Com Corporation. All other company and product names may be trademarks of their respective companies. While every
effort is made to ensure the information given is accurate, neither H3C or 3Com accepts liability for any errors or mistakes which may arise. All specifications
are subject to change without notice. 09/2009