H3C MSR 2600 Series, MSR 26-30 MSR 26-00-5-GU, MSR 26-00-5-GT, MSR 26-00-5-LM, MSR 26-00-17 Installation Manual

New H3C Technologies Co., Ltd.
http://www.h3c.com.hk

Document version: 6W101-20170612

H3C MSR 2600 Routers

Installation Guide

Copyright © 2014-2017, New H3C Technologies Co., Ltd. and its licensors

All rights reserved

No part of this manual may be reproduced or transmitted in any form or by any means without prior
written consent of New H3C Technologies Co., Ltd.

Trademarks

H3C, , H3CS, H3CIE, H3CNE, Aolynk, , H

3

SecEngine, SecPath, SecCenter, SecBlade, Comware, ITCMM and HUASAN are trademarks of New
H3C Technologies Co., Ltd.

All other trademarks that may be mentioned in this manual are the property of their respective owners

Notice

The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute the warranty of any kind, express or implied.

Environmental protection

This product has been designed to comply with the environmental protection requirements. The storage,
use, and disposal of this product must meet the applicable national laws and regulations.

Care, , IRF, NetPilot, Netflow,

Preface

The H3C MSR 2600 Routers Installation Guide includes seven chapters, which describe the preparing for
installation, installing the router, replacement procedure, troubleshooting, chassis views and technical
specifications, LEDs, and slot arrangement.

This preface includes the following topics about the documentation:

• Audience.

• Conventions.

• Obtaining documentation.

• Technical support.

• Documentation feedback.

Audience

This documentation is intended for:

• Network planners.

• Field technical support and servicing engineers.

• Network administrators working with the routers.

Conventions

The following information describes the conventions used in the documentation.

Command conventions

Convention Description

Boldface Bold text represents commands and keywords that you enter literally as shown.

Italic Italic text represents arguments that you replace with actual values.

[ ] Square brackets enclose syntax choices (keywords or arguments) that are optional.

{ x | y | ... }

[ x | y | ... ]

{ x | y | ... } *

[ x | y | ... ] *

Braces enclose a set of required syntax choices separated by vertical bars, from which
you select one.

Square brackets enclose a set of optional syntax choices separated by vertical bars, from
which you select one or none.

Asterisk marked braces enclose a set of required syntax choices separated by vertical
bars, from which you select a minimum of one.

Asterisk marked square brackets enclose optional syntax choices separated by vertical
bars, from which you select one choice, multiple choices, or none.

&<1-n>

# A line that starts with a pound (#) sign is comments.

The argument or keyword and argument combination before the ampersand (&) sign can
be entered 1 to n times.

GUI conventions

Convention Description

Boldface

> Multi-level menus are separated by angle brackets. For example, File > Create > Folder.

Symbols

Convention Description

WARNING

CAUTION

IMPORTANT

NOTE

TIP

Network topology icons

Window names, button names, field names, and menu items are in Boldface. For
example, the New User window opens; click OK.

An alert that calls attention to important information that if not understood or followed can
result in personal injury.

An alert that calls attention to important information that if not understood or followed can
result in data loss, data corruption, or damage to hardware or software.

An alert that calls attention to essential information.

An alert that contains additional or supplementary information.

An alert that provides helpful information.

Represents a generic network device, such as a router, switch, or firewall.

T

T

T

T







Represents a routing-capable device, such as a router or Layer 3 switch.

Represents a generic switch, such as a Layer 2 or Layer 3 switch, or a router that supports
Layer 2 forwarding and other Layer 2 features.

Represents an access controller, a unified wired-WLAN module, or the access controller
engine on a unified wired-WLAN switch.

Represents an access point.

Wireless terminator unit.

Wireless terminator.

Represents a mesh access point.

Represents omnidirectional signals.

Represents directional signals.



Represents a security product, such as a firewall, UTM, multiservice security gateway, or
load balancing device.

Represents a security module, such as a firewall, load balancing, NetStream, SSL VPN,
IPS, or ACG module.

Examples provided in this document

Examples in this document might use devices that differ from your device in hardware model,
configuration, or software version. It is normal that the port numbers, sample output, screenshots, and
other information in the examples differ from what you have on your device.

Obtaining documentation

To access the most up-to-date H3C product documentation, go to the H3C website
at http://www.h3c.com.hk

To obtain information about installation, configuration, and maintenance, click

.

http://www.h3c.com.hk/Technical_Documents

To obtain software version information such as release notes, click

http://www.h3c.com.hk/Software_Download

Technical support

[e-mail]

http://www.h3c.com.hk

Documentation feedback

You can email your comments about product documentation to [e-mail].

We appreciate your comments.